journal article·2009-03

Prediction of the Fatigue Life of Cast Steel Containing Shrinkage Porosity

Richard A. Hardin, Christoph Beckermann

Publisher page

Abstract

A simulation methodology for predicting the fatigue life of cast steel components with shrinkage porosity is developed and validated through comparison with previously performed measurements. A X-ray tomography technique is used to reconstruct the porosity distribution in 25 test specimens with average porosities ranging from 8 to 21 pct. The porosity field is imported into finite element analysis (FEA) software to determine the complex stress field resulting from the porosity. In the stress simulation, the elastic mechanical properties are made a function of the local porosity volume fraction. A multiaxial strain-life simulation is then performed to determine the fatigue life. An adaptive subgrid model is developed to reduce the dependence of the fatigue life predictions on the numerical mesh chosen and to account for the effects of porosity that is too small to be resolved in the simulations. The subgrid model employs a spatially variable fatigue notch factor that is dependent on the local pore radius relative to the finite element node spacing. A probabilistic pore size distribution model is used to estimate the radius of the largest pore as a function of the local pore volume fraction. It is found that, with the adaptive subgrid model and the addition of a uniform background microporosity field with a maximum pore radius of 100 μm, the measured and predicted fatigue lives for nearly all 25 test specimens fall within one decade. Because the fatigue lives of the specimens vary by more than four orders of magnitude for the same nominal stress amplitude and for similar average porosity fractions, the results demonstrate the importance of taking into account in the simulations the distribution of the porosity in the specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Mechanical Failure Analysis and Simulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. R.A. Hardin, C. Beckermann: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2992–300610.1007/s11661-007-9390-4 ↗
2. R.A. Hardin, R.K. Huff, C. Beckermann: in Modeling of Casting, Welding and Advanced Solidification Processes XI, C. Gandin, M. Bellet, eds., TMS, Warrendale, PA, 2006, pp. 653–60
3. R.I. Stephens, A. Fatemi, R.R. Stephens, H.O. Fuchs: Metal Fatigue in Engineering, 2nd ed., Wiley-Interscience, New York, NY, 2000
4. 2002 Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2002, vol. 03.01, pp. 569–83
5. S.S. Manson: Behavior of Materials under Conditions of Thermal Stress, NACA TN2933, National Advisory Committee for Aeronautics, Washington, DC, 1954
6. L.F. Coffin: Trans. ASME, 1954, vol. 76, pp. 931–50
7. D.F. Socie, G.B. Marquis: Multiaxial Fatigue, Society of Automotive Engineers, Warrendale, PA, 2000
8. B.-R. You, S.-B. Lee: Int. J. Fatigue, 1996, vol. 18 (4), pp. 235–4410.1016/0142-1123(96)00002-3 ↗
9. C.-C. Chu: Int. J. Fatigue, 1996, vol. 19, Suppl. 1, pp. S325–S330
10. D. Taylor, P. Bologna, K. Bel Knani: Int. J. Fatigue, 2000, vol. 22, pp. 735–4210.1016/S0142-1123(00)00062-1 ↗
11. Y. Liu, B. Stratman, S. Mahadevan: Int. J. Fatigue, 2006, vol. 28, pp. 747–5610.1016/j.ijfatigue.2005.09.007 ↗
12. Y. Liu, B. Stratman, S. Mahadevan: Rel. Eng. Sys. Saf., 2008, vol. 93, pp. 456–6710.1016/j.ress.2006.12.021 ↗
13. fe -safe User Manual, Safe Technology, Ltd., Sheffield, UK, 2006, pp. 233–39
14. P.C. Paris, F. Erdogan: Trans. ASME, J. Basic Eng., 1963, vol. D85, pp. 528–3410.1115/1.3656900 ↗
15. S.C. Haldimann-Sturm, A. Nussbaumer: Int. J. Fatigue, 2008, vol. 30, pp. 528–3710.1016/j.ijfatigue.2007.03.007 ↗
16. P. Baicchi, L. Collini, E. Riva: Eng. Fract. Mech., 2007, vol. 74, pp. 539–4810.1016/j.engfracmech.2006.04.018 ↗
17. Y. Nadot, V. Denier: Eng. Fail. Anal., 2004, vol. 11, pp. 485–9910.1016/j.engfailanal.2003.12.001 ↗
18. P. Hausild, C. Berdin, P. Bompard, and N. Verdiere: Proc. 6th World 2000 Duplex Conf., Associazione Italiana di Metallurgia, Venice, Italy, 2000, pp. 209–18
19. K.M. Sigl, R. Hardin, R.I. Stephens, C. Beckermann: Int. J. Cast Met. Res., 2004, vol. 17 (3), pp. 130–4610.1179/136404604225020588 ↗
20. S. Jayet-Gendrot, P. Gilles, and C. Migne: Fatigue and Fracture: 1997 PVP-Vol. 350, 1997, ASME, vol. 1, pp. 107–16
21. M. Kohno, M. Makioka: AFS Trans., 1970, vol. 78, pp. 9–16
22. K. Chijiwa, T. Nakayama, and M. Imamura: 35e CIF, vol. 36, pp. 1–12
23. P. Heuler, C. Berger, J. Motz: Fatigue Fract. Eng. Mater. Struct. 1992, vol. 16, pp. 115–3610.1111/j.1460-2695.1993.tb00074.x ↗
24. T. Billaideau, Y. Nadot, G. Bezine: Acta Mater., 2004, vol. 52, pp. 3911–2010.1016/j.actamat.2004.05.006 ↗
25. Y. Nadot, J. Mendez, N. Ranganathan: Int. J. Fatigue, 2004, vol. 26, pp. 311–1910.1016/S0142-1123(03)00141-5 ↗
26. T. Mansson, F. Nilsson: Int. J. Cast Met. Res., 2001, vol. 13 (6), pp. 373–7810.1080/13640461.2001.11819418 ↗
27. X. Zhu, J.Z. Yi, J.W. Jones, J.E. Allison: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1111–2210.1007/s11661-006-9070-9 ↗
28. X. Zhu, J.Z. Yi, J.W. Jones, J.E. Allison: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1123–35
29. J. Linder, M. Axelsson, H. Nilsson: Int. J. Fatigue, 2006, vol. 28, pp. 1752–5810.1016/j.ijfatigue.2006.01.001 ↗
30. D.L. McDowell, K. Gall, M.F. Horstemeyer, J. Fan: Eng. Fract. Mech., 2003, vol. 70 (1), pp. 49–8010.1016/S0013-7944(02)00021-8 ↗
31. C. Sonsino, J. Ziese: Int. J. Fatigue, 1993, vol. 15, pp. 75–8410.1016/0142-1123(93)90001-7 ↗
32. A. Dabayeh, T.H. Topper: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 993–100610.1046/j.1460-2695.2000.00359.x ↗
33. J.-Y. Buffière, S. Savelli, P.H. Jouneau, E. Maire, R. Fougères: Mater. Sci. Eng., A, 2001, vol. 316, pp. 115–2610.1016/S0921-5093(01)01225-4 ↗
34. Q.G. Wang, P.E. Jones: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 615–2110.1007/s11663-007-9051-4 ↗
35. Q.G. Wang, D. Apelian, D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–8410.1016/S1471-5317(00)00008-0 ↗
36. B. Skallerud, T. Iveland, G. Härkegård: Eng. Fract. Mech., 1993, vol. 44 (6), pp. 857–7410.1016/0013-7944(93)90108-5 ↗
37. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier Science, Ltd., Oxford, United Kingdom, 2002
38. Y. Xue, C.L. Burton, M.F. Horstmeyer, D.L. McDowell, J.T. Berry: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 601–0610.1007/s11663-007-9062-1 ↗
39. A.C. Kak, M. Slaney: Principles of Computerized Tomographic Imaging, Society for Industrial and Applied Mathematics, Philadelphia, PA, 2001, pp. 275–9610.1137/1.9780898719277.ch7 ↗
40. R.I. Stephens: Fatigue and Fracture Toughness of Five Carbon or Low Alloy Cast Steels at Room or Low Climatic Temperatures, Steel Founders’ Society of America, Des Plaines, IL, 1982
41. IMSL Fortran Subroutines for Mathematical Applications: Math/Library Volumes 1 and 2, Visual Numerics, Inc., Houston, TX, 1997
42. A.P. Roberts, E.J. Garboczi: J. Am. Ceram. Soc., 2000, vol. 83 (12), pp. 3041–4810.1111/j.1151-2916.2000.tb01680.x ↗
43. Abaqus /Standard, Abaqus, Inc., Providence, RI, 2006
44. Fatigue Design Handbook, Society of Automotive Engineers, Warrendale, PA, 1968, vol. 4, p. 29
45. R.E. Peterson: Stress Concentration Factors, Wiley-Interscience, New York, NY, 1974, p. 137
46. K.D. Carlson, S. Ou, R.A. Hardin, C. Beckermann: Int. J. Cast Met. Res., 2001, vol. 14, pp. 169–8310.1080/13640461.2001.11819436 ↗
47. K.D. Carlson, Z. Lin, R.A. Hardin, C. Beckermann, G. Mazurkevich, and M.C. Schneider: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J.A. Warren, M.R. Jolly, and M.J.M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 295–302
48. K.D. Carlson, Z. Lin, C. Beckermann: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 541–55510.1007/s11663-006-9013-2 ↗