Studies of Evaluation of Hydrogen Embrittlement Property of High-Strength Steels with Consideration of the Effect of Atmospheric Corrosion
Source abstract
Abstract
Hydrogen embrittlement of high-strength steels was investigated by using slow strain rate test (SSRT) of circumferentially notched round bar specimens after hydrogen precharging. On top of that, cyclic corrosion tests (CCT) and outdoor exposure tests were conducted prior to SSRT to take into account the effect of hydrogen uptake under atmospheric corrosion for the evaluation of the susceptibility of high-strength steels. Our studies of hydrogen embrittle properties of high-strength steels with 1100 to 1500 MPa of tensile strength and a prototype ultrahigh-strength steel with 1760 MPa containing hydrogen traps using those methods are reviewed in this article. A power law relationship between notch tensile strength of hydrogen-precharged specimens and diffusible hydrogen content has been found. It has also been found that the local stress and the local hydrogen concentration are controlling factors of fracture. The results obtained by using SSRT after CCT and outdoor exposure test were in good agreement with the hydrogen embrittlement fracture property obtained by means of long-term exposure tests of bolts made of the high-strength steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. T. Fujita and Y. Yamada: Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, NACE-5, NACE, Unieux-Firminy, France, 1977, pp. 736–46.
2. H.H. Johnson, J.G. Morlet, and A.R. Troiano: Trans. Am. Inst. Min. Metall. Eng., 1958, vol. 212, pp. 528–36.
3. K. Ohnishi, R. Chiba, K. Teshirogi, and H. Kaga: J. Japan Inst. Metals, 1976, vol. 40, pp. 650–56.10.2320/jinstmet1952.40.6_650 ↗
4. R. Gangloff and R. Wei: Metall. Trans. A, 1977, vol. 8, pp. 1043–53.10.1007/BF02667388 ↗
5. V.F. Kuster, K. Bohnenkamp, and H.-J. Engell: Werkst. Korros., 1978, vol. 29, pp. 792–99.10.1002/maco.19780291203 ↗
6. A. Inoue, Y. Hosoya, and T. Masumoto: Trans. ISIJ, 1979, vol. 19, pp. 170–78.10.2355/isijinternational1966.19.170 ↗
7. A.R. Troiano: Trans. ASM, 1959, vol. 52, pp. 54–80.
8. I.M. Bernstein: Mater. Sci. Eng., 1970, vol. 6, pp. 1–19.10.1016/0025-5416(70)90073-X ↗
9. J.P. Hirth: Metall. Trans. A, 1980, vol. 11, pp. 861–90.10.1007/BF02654700 ↗
10. R. Kirchheim and J.P. Hirth: Scripta Metall., 1982, vol. 16, pp. 475–78.10.1016/0036-9748(82)90176-4 ↗
11. C.J. Mcmahon, Jr.: Eng. Fract. Mechan., 2001, vol. 68, pp. 773–88.10.1016/S0013-7944(00)00124-7 ↗
12. C.A. Zapffe and C.E. Sims: Am. Inst. Min. Metall. Eng., 1941, vol. 1307, pp. 1–37.
13. N.J. Petch and P. Stables: Nature, 1952, vol. 169, pp. 842–43.10.1038/169842a0 ↗
14. J.P. Hirth: Philos. Trans. R. Soc. Lond. Ser. A-Math. Phys. Eng. Sci., 1980, vol. 295, pp. 139–49.10.1098/rsta.1980.0095 ↗
15. R.A. Oriani: Hydrogen Embrittlement and Stress Corrosion Cracking, ASM, Metals Park, OH, 1995, pp. 43–59.
16. M. Yamaguchi, K.-I. Ebihara, M. Itakura, T. Kadoyoshi, T. Suzudo, and H. Kaburaki: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 330–39.10.1007/s11661-010-0380-6 ↗
17. D.E. Jiang and E.A. Carter: Acta Mater., 2004, vol. 52, pp. 4801–07.10.1016/j.actamat.2004.06.037 ↗
18. M.R. Louthan Jr., G.R. Caskey Jr., J.A. Donovan, and D.E. Rawl, Jr.: Mater. Sci. Eng., 1972, vol. 10, pp. 357–68.10.1016/0025-5416(72)90109-7 ↗
19. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
20. M. Nagumo, M. Nakamura, and K. Takai: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 339–47.10.1007/s11661-001-0265-9 ↗
21. M. Nagumo: Mater. Sci. Technol., 2004, vol. 20, pp. 940–50.10.1179/026708304225019687 ↗
22. M. Yamaguchi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 319–29.10.1007/s11661-010-0381-5 ↗
23. J. Sanchez, J. Fullea, M.C. Andrade, and P.L. De Andres: Phys. Rev. B, 2010, vol. 81, p. 132102.10.1103/PhysRevB.81.132102 ↗
24. A. Ramasubramaniam, M. Itakura, and E.A. Carter: Phys. Rev. B, 2009, vol. 79, p. 174101.10.1103/PhysRevB.79.174101 ↗
25. J. Sanchez, J. Fullea, C. Andrade, and P.L. De Andres: Phys. Rev. B, 2008, vol. 78, pp. 014113.10.1103/PhysRevB.78.014113 ↗
26. D.E. Jiang and E.A. Carter: Phys. Rev. B, 2004, vol. 70, p. 064102.10.1103/PhysRevB.70.064102 ↗
27. A. Castedo, J. Sanchez, J. Fullea, M.C. Andrade, and P.L. De Andres: Phys. Rev. B, 2011, vol. 84, p. 094101.10.1103/PhysRevB.84.094101 ↗
28. T. Otsubo, S. Goto, and H. Sato: 2nd International Symposium, Hydrogen in Metals, Japan Institute of Metals, Sendai, Japan, 1980, p. 241.
29. N. Suzuki, N. Ishii, T. Miyagawa, and H. Harada: Tetsu-to-Hagané, 1993, vol. 79, pp. 227–32.10.2355/tetsutohagane1955.79.2_227 ↗
30. S. Yamasaki and T. Takahashi: Tetsu-to-Hagané, 1997, vol. 83, pp. 454–59.10.2355/tetsutohagane1955.83.7_454 ↗
31. T. Kushida, H. Matsumoto, N. Kuratomi, T. Tsumura, F. Nakasato, and T. Kudo: Tetsu-to-Hagané, 1996, vol. 82, pp. 297–302.10.2355/tetsutohagane1955.82.4_297 ↗
32. D.G. Enos and J.R. Scully: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1151–66.10.1007/s11661-002-0217-z ↗
33. M. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2007, vol. 49, pp. 4081–97.10.1016/j.corsci.2007.03.038 ↗
34. M.Q. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Technol., 2006, vol. 22, pp. 167–72.10.1179/174328406X86191 ↗
35. M.Q. Wang, E. Akiyama, and K. Tsuzaki: Scripta Mater., 2005, vol. 52, pp. 403–08.10.1016/j.scriptamat.2004.10.023 ↗
36. M.Q. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Eng., 2005, vol. A398, pp. 37–46.10.1016/j.msea.2005.03.008 ↗
37. M. Wang, E. Akiyama, and K. Tsuzaki: Scripta Mater., 2005, vol. 53, pp. 713–18.10.1016/j.scriptamat.2005.05.014 ↗
38. Y. Nie, Y. Kimura, T. Inoue, F. Yin, E. Akiyama, and K. Tsuzaki: Metall. Mater. Trans. A, 2012, in press.
39. M. Koyama, E. Akiyama, and K. Tsuzaki: Corros. Sci., in press.
40. M. Koyama, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2012, vol. 54, pp. 1–4.10.1016/j.corsci.2011.09.022 ↗
41. M. Koyama, E. Akiyama, T. Sawaguchi, D. Raabe, and K. Tsuzaki: Scripta Mater., 2012, vol. 66, pp. 459–62.10.1016/j.scriptamat.2011.12.015 ↗
42. S. Sakashita, E. Akiyama, K. Tsuzaki, and S. Matsuyama: Tetsu-to-Hagané, 2002, vol. 88, pp. 849–56.10.2355/tetsutohagane1955.88.12_849 ↗
43. K. Hirai and N. Uno: J. Struct. Constr. Eng., AIJ, 2002, vol. 560, pp. 197–204.10.3130/aijs.67.197_4 ↗
44. Japanese Society of Steel Construction (JSSC) Technical Report, vol. 91, Japanese Society of Steel Construction, Tokyo, Japan, 2010.
45. T. Kushida: ISIJ Int., 2003, vol. 43, pp. 470–74.10.2355/isijinternational.43.470 ↗
46. T. Omura, T. Kushida, H. Nakazato, S. Watanabe, and I. Oyamada: Tetsu-to-Hagané, 2005, vol. 91, pp. 478–84.10.2355/tetsutohagane1955.91.5_478 ↗
47. E. Akiyama, K. Matsukado, M. Wang, and K. Tsuzaki: Corros. Sci., 2010, vol. 52, pp. 2758–65.10.1016/j.corsci.2009.11.046 ↗
48. Y. Kimura, E. Akiyama, and K. Tsuzaki: Steel Constr. Eng., 2007, vol. 14, pp. 121–27.
49. Y. Kimura: Eng. Mater., 2009, vol. 57, pp. 34–35.
50. S. Li, E. Akiyama, Y. Kimura, K. Tsuzaki, N. Uno, and B. Zhang: Sci. Technol. Adv. Mater., 2010, vol. 11, pp. 025005.10.1088/1468-6996/11/2/025005 ↗
51. M.Q. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2006, vol. 48, pp. 2189–2202.10.1016/j.corsci.2005.07.010 ↗
52. M.Q. Wang, E. Akiyamam and K. Tsuzaki: Mater. Sci. Forum, 2006, vol. 512, pp. 55–60.10.4028/www.scientific.net/MSF.512.55 ↗
53. M. Nishida: Stress Concentration, Morikita Shuppan, Tokyo, Japan, 1973.
54. S. Takagi, T. Inoue, T. Hara, M. Hayakawa, K. Tsuzaki, and T. Takahashi: Tetsu-to-Hagané, 2000, vol. 86, pp. 689–96.10.2355/tetsutohagane1955.86.10_689 ↗
55. R.A. Oriani: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1368–69.
56. S. Li, Z. Zhang, E. Akiyama, K. Tsuzaki, and B. Zhang: Corros. Sci., 2010, vol. 52, pp. 1660–67.10.1016/j.corsci.2010.02.005 ↗
57. E. Akiyama, K. Matsukado, S. Li, and K. Tsuzaki: Appl. Surf. Sci., 2011, vol. 257, pp. 8275–81.10.1016/j.apsusc.2011.03.037 ↗
58. E. Akiyama, S. Li, T. Shinohara, Z. Zhang, and K. Tsuzaki: Electrochim. Acta, 2011, vol. 56, pp. 1799–1805.10.1016/j.electacta.2010.09.043 ↗
59. S. Li, E. Akiyama, N. Uno, K. Hirai, K. Tsuzaki, and B. Zhang: Corros. Sci., 2010, vol. 52, pp. 3198–3204.10.1016/j.corsci.2010.05.038 ↗
60. NIMS Corrosion Data Sheet, 2007, vol. 3A.
61. T. Sundararajan, E. Akiyama, and K. Tsuzaki: Electrochem. Solid St., 2005, vol. 8, pp. B30–33.10.1149/1.1979367 ↗
62. T. Sundararajan, E. Akiyama, and K. Tsuzaki: Scripta Mater., 2005, vol. 53, pp. 1219–23.10.1016/j.scriptamat.2005.08.016 ↗
63. T. Sundararajan, E. Akiyama, Y. Katada, and K. Tsuzaki: ISIJ Int., 2006, vol. 46, pp. 1081–85.10.2355/isijinternational.46.1081 ↗