Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels
Source abstract
Abstract
The effect of oxygen partial pressure on the selective oxidation and reactive wetting behavior of 1.0 pct Si-0.5 pct Al and 1.5 pct Si TRIP-assisted steels was studied. The annealing atmosphere affected the surface chemistry and the oxide morphology, which in turn affected reactive wetting. Similar wetting results were observed for the two TRIP steel compositions with good wetting being observed at the two lower oxygen partial pressure atmospheres (220 K (–53 °C) or 223 K (–50 °C) dew point (dp) and 243 K (–30 °C) dp) with poor reactive wetting at the higher oxygen partial pressure atmosphere (278 K (+5 °C) dp). The differences in wetting were attributed to the oxide morphology. The predominant oxide morphology at the two low oxygen partial pressure atmospheres was larger, widely spaced oxide nodules. At the 278 K (+5 °C) dp, the predominant oxide morphology was smaller, more closely spaced oxide nodules. TEM analysis revealed that at the 243 K (–30 °C) dp, Fe2Al5 was able to form between oxide nodules promoting good reactive wetting. At the 278 K (+5 °C) dp, the more closely spaced nodules may have impeded the formation of Fe2Al5, thereby producing numerous bare spot defects in the zinc coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. M. Takahashi, H. Yoshida, and S. Hiwatashi: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19–21, 2002, pp. 103–11.
2. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
3. J. Van Slycken, P. Verleysen, J. Degrieckm, J. Bouquerel, and B.C. De Cooman: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 516–24.10.1016/j.msea.2007.01.075 ↗
4. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
5. V.F. Zackay, E.A. Parler, D. Fahr, and R. Busch: Trans. ASM, 1967, vol. 60, pp. 252–59.
6. P. Jacques, X. Cornet, P. Harlet, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
7. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. ISIJ, 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
8. P. Jacques, Q. Furnémont, S. Godet, T. Pardoen, K. Conlon, and F. Delannay: Philos. Mag., 2006, vol. 86, pp. 2371–92.10.1080/14786430500529359 ↗
9. P.J. Jacques, E. Girault, P. Harlet, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061–67.10.2355/isijinternational.41.1061 ↗
10. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
11. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Phil. Mag. A, 2001, vol. 81, pp. 1789–1812.10.1080/01418610108216637 ↗
12. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–74.10.2355/isijinternational.41.1068 ↗
13. S. Takeuchi: J. Phys. Soc. Jpn., 1969, vol. 27, pp. 929–40.10.1143/JPSJ.27.929 ↗
14. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, 1978, p. 11.
15. E. Girault, P. Jacques, P. Ratchev, J. Van Humbeeck, B. Verlinden, and E. Aernoud: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 471–74.10.1016/S0921-5093(99)00330-5 ↗
16. A. Pichler, S. Traint, G. Arnolder, P. Stiaszny, M. Blaimschein, and E.A. Werner: Iron Steelmaker, 2003, vol. 30, pp. 21–31.
17. A. Mertens and J. McDermid: Materials Science & Technology 2005—Developments in Sheet Products for Automotive Applications, Pittsburgh, PA, Sept. 25–28, 2005, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2005, pp. 199–210.
18. D. Krizan, B.C. De Cooman, and J. Antonissen: International Conference on Advanced High Strength Sheet Steels for Automotive Applications Proceedings, Winter Park, CO, June 6–9, 2004, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 205–16.
19. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, DOI: 10.1007/s11661-010-0185-7.10.1007/s11661-010-0185-7 ↗
20. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne, and S. Claessens: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, pp. 1123–34
21. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
22. J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–31.10.1179/026708303225009300 ↗
23. J. Mahieu, S. Classens, B.C. De Cooman, and F. Goodwin: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 529–38
24. J. Mahieu, B.C. De Cooman, J. Maki, and S. Claessens: Iron Steelmaker, 2002, vol. 29, pp. 29–34.10.1179/030192302225005556 ↗
25. J. Mahieu, S. Classens, B.C. De Cooman, and F. Goodwin: MS&T 2004 Conf. Proc., New Orleans, LA, Sept. 26–29, 2004, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2004, pp. 847–57.
26. E.M. Bellhouse, A.I.M. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 147–56.10.1016/j.msea.2006.09.117 ↗
27. E.M. Bellhouse and J.R. McDermid: MS&T 2007 Conf. Proc. - Automotive Zinc Coated Steel Sheets, Detroit, MI, Sept. 16–20, 2007, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2007, pp. 547–56.
28. J.R. McDermid, M.H. Kaye, and W.T. Thompson: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 215–30.10.1007/s11663-007-9028-3 ↗
29. H.A. Fine and G.H. Geiger: Handbook on Material and Energy Balance Calculations in Metallurgical Processes, TMS-AIME, Warrendale, PA, 1979, pp. 428 and 431.
30. J. Finster: Surf. Interface Anal., 1988, vol. 12, pp. 309–14.10.1002/sia.740120507 ↗
31. I. Parezanović and M. Spiegel: Steel Res. Int., 2005, vol. 76, pp. 832–39.10.1002/srin.200506102 ↗
32. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 361–72.
33. T. Van De Putte, D. Loison, J. Penning, and S. Claessens: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2875–84.10.1007/s11661-008-9636-9 ↗
34. W.H. Casey, M.F. Hochella, Jr., and H.R. Westrich: Geochim. Cosmochim. Acta, 1993, vol. 57, pp. 785–93.10.1016/0016-7037(93)90168-V ↗
35. B.R. Strohmeier and D.M. Hercules: J. Phys. Chem., 1984, vol. 88, pp. 4922–29.10.1021/j150665a026 ↗
36. C. Wagner: Z. Elektrochem., 1959, vol. 63, pp. 772–82.
37. J.M. Mataigne, M. Lamberigts, and V. Leroy: in Developments in the Annealing of Sheet Steels, R. Pradhan and I. Gupta, eds., TMS, Warrendale, PA, 1992, pp. 512–28.
38. C.R. Shastry, J.A. Rotole, and T.W. Kaiser: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, Nov. 18–22, 2007, Iron and Steel Institute of Japan, Tokyo, Japan, 2007, pp. 403–08.
39. D. Huin, V. Lanteri, D. Loison, P. Autesserre, and H. Gaye: Microscopy of Oxidation 3, Proc. 3rd Int. Conf. on the Microscopy of Oxidation, S.B. Newcomb and J.A. Little, eds., University of Cambridge, Cambridge, United Kingdom, 1996, pp. 573–86.
40. D. Huin, P. Flauder, and J.-B. Leblond: Oxid. Met., 2005, vol. 64, pp. 131–67.10.1007/s11085-005-5718-x ↗
41. Diffusion Data, 1969, vol. 3, p. 270.10.1177/003803856900300234 ↗
42. J. Takada, S. Yamamoto, S. Kikuchi, and M. Adachi: Oxid. Met., 1986, vol. 25, pp. 93–105.10.1007/BF00807998 ↗
43. J. Takada and M. Adachi: J. Mater. Sci., 1986, vol. 21, pp. 2133–37.10.1007/BF00547959 ↗
44. H. Oikawa: Technol. Rep. Tohoku Univ., 1983, vol. 48, pp. 7–77.
45. R.J. Borg and D.Y.F. Lai: J. Appl. Phys., 1970, vol. 41, pp. 5193–5200.10.1063/1.1658644 ↗
46. J. Takada, K. Kashiwagi, and M. Adachi: J. Mater. Sci., 1984, vol. 19, pp. 3451–58.10.1007/BF00549838 ↗
47. Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
48. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
49. Y.F. Gong, T.J. Song, H.S. Kim, J.H. Kwak, and B.C. De Cooman: Proc. Asia-Pacific Galvanizing Conf. 2009, Jeju, Korea, Nov. 8–12, 2009, The Corrosion Science Society of Korea, Seoul, Korea, 2009, paper no. B-15.
50. X.S. Li, S.-I. Baek, C.-S. Oh, S.-J. Kim, and Y.-W. Kim: Scripta Mater., 2007, vol. 57, pp. 113–16.10.1016/j.scriptamat.2007.03.040 ↗