journal article·2004-06

Characterization and modeling of quenching-induced residual stresses in the nickel-based superalloy IN718

D. Dye, K. T. Conlon, R. C. Reed

Publisher page

Abstract

The residual stress fields in pieces of quenched IN718 superalloy have been characterized by neutron diffraction. The samples were in the form of cylindrical rods of length sufficient to ensure that steady-state conditions prevail at the midsection. Quenching the samples in air, water, and oil generated various residual stress fields. The interfacial heat-transfer coefficients were estimated using an inverse-modeling technique. The findings were rationalized with an elastic-plastic finite-element model that included temperature-dependent properties. The hoop and axial stresses are the most significant components of the stress field and arise from the plastic deformation occurring at the periphery of the cylindrical sections, the extent of which depends strongly upon the severity of the quench. The model is used to examine the residual stress fields to be expected in a turbine-disc forging of idealized geometry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. G.E. Myers: Analytical Methods in Conduction Heat Transfer, McGraw-Hill, New York, NY, 1971.
2. Y. Nagasaka, J.K. Brimacombe, E.B. Hawbolt, I.V. Samarasekera, B. Hernandez-Morales, and S.E. Chidiac: Metall. Trans. A, 1993, vol. 24A, pp. 795–808.10.1007/BF02656501 ↗
3. S. Denis, S. Sjöström, and A. Simon: Metall. Trans. A, 1987, vol. 18A, pp. 1203–12.10.1007/BF02647190 ↗
4. B. Smoljan: J. Mater. Eng. Perf., 2002, vol. 11, pp. 75–79.10.1007/s11665-002-0011-5 ↗
5. M.T. Todinov: Modell. Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 25–41.10.1088/0965-0393/7/1/003 ↗
6. Y.V.L.N. Murthy, G. Venkata Rao, and P. Krishna Iyer: Comput. Struct., 1996, vol. 60, pp. 131–54.10.1016/0045-7949(95)00359-2 ↗
7. G.A. Webster: Mater. Sci. Forum, 2000, vol. 347 (3), pp. 1–9.10.4028/www.scientific.net/MSF.347-349.1 ↗
8. G.A. Webster and A.N. Ezeilo: Int. J. Fatigue, 2001, vol. 23, pp. S375–83.10.1016/S0142-1123(01)00133-5 ↗
9. M. de Oliveira, J. Ward, D.R. Garwood, and R.A. Wallis: J. Mater. Eng. Perf., 2002, vol. 11, pp. 80–85.10.1007/s11665-002-0012-4 ↗
10. C.A. Dandre, S.M. Roberts, R.W. Evans, and R.C. Reed: Mater. Sci. Technol., 2000, vol. 16, pp. 14–25.10.1179/026708300773002627 ↗
11. D. Dye, S.M. Roberts, P.J. Withers, and R.C. Reed: J. Strain Analysis, 2000, vol. 35, pp. 247–59.10.1243/0309324001514396 ↗
12. D. Dye, H.J. Stone, and R.C. Reed: Curr. Opin. Solid State Mater. Sci., 2001, vol. 5, pp. 31–37.10.1016/S1359-0286(00)00019-X ↗
13. ABAQUS/Standard User’s Manual, Hibbit, Karlsson and Sorensen, Inc., Pawtucket, RI, 1999.
14. R.I. Ramakrishnan and T.E. Howson: J. Mater., 1992, vol. 44, pp. 29–32.
15. S.G. Chen, C.-I. Weng, and J. Lin: J. Mater. Proc. Technol., 1999, vol. 86, pp. 257–63.10.1016/S0924-0136(98)00322-7 ↗
16. “High Temperature, High Strength Nickel-Base Alloys,” Technical Report, Nickel Development Institute, London, 1995.
17. ASM Handbook, vol. 1, Properties and Selection: Irons, Steels, and High-Performance Alloys, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
18. J. Goldak, M. Bibby, J. Moore, R. House, and B. Patel: Metall. Trans. B, 1986, vol. 17B, pp. 587–600.10.1007/BF02670226 ↗
19. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗
20. F.P. Incropera and D.P. DeWitt: Fundamentals of Heat and Mass Transfer, 2nd ed., John Wiley & Sons, New York, NY, 1985.
21. S. Nukiyama: Int. J. Heat Mass Transfer, 1966, vol. 9, pp. 1419–33.10.1016/0017-9310(66)90138-4 ↗
22. P.J. Webster, G. Mills, X.D. Wang, W.P. Kang, and T.M. Holden: J. Neutron Res., 1996, vol. 3, pp. 223–40.10.1080/10238169608200197 ↗
23. M.A.M. Bourke, P. Rangaswamy, T.M. Holden, and R. Leachman: Mater. Sci. Eng. A, 1998, vol. 257, pp. 333–40.10.1016/S0921-5093(98)00803-X ↗
24. ASM Handbook, vol. 4, Heat Treating, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 67–120.
25. M. Hetènyi: Handbook of Experimental Stress Analysis, John Wiley, New York, NY, 1950.