journal article·2011-09

On the Stress-Induced Formation of R-Phase in Ultra-Fine-Grained Ni-Rich NiTi Shape Memory Alloys

J. Olbricht, A. Yawny, J. L. Pelegrina, A. Dlouhy, G. Eggeler

Publisher page

Abstract

Phase transformations in binary ultra-fine-grained (UFG) pseudoelastic NiTi wires were studied in a wide temperature range using mechanical loading/unloading experiments, resistance measurements, differential scanning calorimetry (DSC), thermal infrared imaging, and transmission electron microscopy (TEM). The formation of R-phase can be detected in the mechanical experiments. It is shown that the stress-strain response of the R-phase can be isolated from the overall stress-strain data. The R-phase always forms prior to B19′ when good pseudoelastic properties are observed. The stress-induced B2 to R-phase transition occurs in a homogeneous manner, contrary to the localized character of the B2/R to B19′ transformations. The temperature dependence of the critical stress values for the formation of the martensitic phases shows a Clausius Clapeyron type of behavior with constants close to 6 MPa/K (B19′) and 18 MPa/K (R-phase). A stress-temperature map is suggested that summarizes the experimentally observed sequences of elementary transformation/deformation processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. E. Hornbogen: in Advanced Structural and Functional Materials, W.G.J. Bunk, ed., Springer-Verlag, Heidelberg, Germany, 1991, pp. 133–63.10.1007/978-3-642-49261-7_5 ↗
2. T. Saburi: in Shape Memory Materials, K. Otsuka and C.M. Wayman, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 49–96.
3. J. Van Humbeeck: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 134–48.10.1016/S0921-5093(99)00293-2 ↗
4. T. Duerig, A. Pelton, and D. Stöckel: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 149–60.10.1016/S0921-5093(99)00294-4 ↗
5. K. Otsuka and X. Ren: Intermetallics, 1999, vol. 7, pp. 511–28.10.1016/S0966-9795(98)00070-3 ↗
6. J. Khalil-Allafi, X. Ren, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 793–803.10.1016/S1359-6454(01)00385-8 ↗
7. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
8. E.A. Prokofiev, J.A. Burow, E.J. Payton, R. Zarnetta, J. Frenzel, D.V. Gunderov, R.Z. Valiev, and G. Eggeler: Adv. Eng. Mater., 2010, in press.
9. T. Sawaguchi, G. Kausträter, A. Yawny, M. Wagner, and G. Eggeler: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2847–60.10.1007/s11661-003-0186-x ↗
10. C. Grossmann, J. Frenzel, V. Sampath, T. Depka, A. Oppenkowski, C. Somsen, K. Neuking, W. Theisen, and G. Eggeler: Mat.-wiss. Werkstofftech., 2008, vol. 39, pp. 499–510.10.1002/mawe.200800271 ↗
11. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzac, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 3, p. 2875.
12. Y. Kudoh, M. Tokonami, S. Miyazaki, and K. Otsuka: Acta Metall., 1985, vol. 33, pp. 2049–56.10.1016/0001-6160(85)90128-2 ↗
13. E. Goo and R. Sinclair: Acta Metall., 1985, vol. 33, pp. 1717–23.10.1016/0001-6160(85)90166-X ↗
14. T. Hara, T. Ohba, and K. Otsuka: J. Phys. IV, 1996, vol. 5 (C8), pp. 641–45.
15. J.W. Christian: The Theory of Transformation in Metals and Alloys, 3rd ed., Pergamon Press, Oxford, United Kingdom, 2002, p. 1102.10.1016/B978-008044019-4/50031-3 ↗
16. H. Funakubo: Shape Memory Alloys, Gordon and Breach Science Publishers, New York, NY, 1984, pp. 1–60.
17. L. Delaey: in Phase Transformations in Materials, Materials Science and Technology–Comprehensive Treatment, R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH, Weinheim, 1991, vol. 5, pp. 339–404.
18. K. Otsuka and C.M. Wayman: in Shape Memory Materials, K. Otsuka and C.M. Wayman, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 1–48.
19. H. Sitepu, W.W. Schmahl, J. Khalil-Allafi, G. Eggeler, A. Dlouhy, D.M. Többens, and M. Tovar: Scripta Mater., 2002, vol. 46, pp. 543–48.10.1016/S1359-6462(02)00032-5 ↗
20. T. Goryczka and H. Morawiec: J. Alloys Compd., 2004, vol. 367, pp. 137–41.10.1016/j.jallcom.2003.08.025 ↗
21. A.J.W. Johnson, R.F. Hamilton, H. Sehitoglu, G. Biallas, H.J. Maier, and Y.I. Chumlyakov: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 919–28.10.1007/s11661-005-0286-x ↗
22. M.L. Young, M.F.-X. Wagner, J. Frenzel, W.W. Schmahl, and G. Eggeler: Acta Mater., 2010, vol. 58, pp. 2344–54.10.1016/j.actamat.2009.12.021 ↗
23. M. Benke, F. Tranta, P. Barkóczy, V. Mertinger, and L. Daróczi: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 522–25.10.1016/j.msea.2007.01.184 ↗
24. J.L. Pelegrina and V. Torra: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2437–40.10.1016/j.msea.2009.06.053 ↗
25. C.M. Hwang, M. Meichle, M.B. Salamon, and C.M. Wayman: Phil. Mag. A, 1983, vol. 47, pp. 9–30.10.1080/01418618308243106 ↗
26. G.E.R. Schulze: Metallphysik, Zweite bearbeitete Auflage, Springer-Verlag, Wien, 1974, p. 324.10.1007/978-3-7091-3275-3 ↗
27. C.M. Hwang, M. Meichle, M.B. Salamon, and C.M. Wayman: Phil. Mag. A, 1983, vol. 47, pp. 31–62.10.1080/01418618308243107 ↗
28. X. Ren, N. Miura, J. Zhang, K. Otsuka, M. Koiwa, T. Suzuki, Y.I. Chumlyakov, and M. Asaj: Mater. Sci. Eng. A, 2001, vol. 312, pp. 196–206.10.1016/S0921-5093(00)01876-1 ↗
29. X. Ren and K. Otsuka: Prog. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗
30. J.L. Pelegrina and R. Romero: Mater. Sci. Eng. A, 2000, vol. 282, pp. 16–22.10.1016/S0921-5093(99)00792-3 ↗
31. S. Miyazaki, S. Kimura, and K. Otsuka: Phil. Mag. A, 1998, vol. 57, pp. 467–78.10.1080/01418618808204680 ↗
32. S. Miyazaki, T. Imai, K. Otsuka, and Y. Suzuki: Scripta Metall., 1981, vol. 15, pp. 853–56.10.1016/0036-9748(81)90265-9 ↗
33. J.A. Shaw and S. Kyriakides: J. Mech. Phys. Sol., 1995, vol. 43, pp. 1243–81.10.1016/0022-5096(95)00024-D ↗
34. J. Olbricht: Spannungsinduzierte Phasenumwandlungen und funktionelle Ermüdung in ultrafeinkörnigen NiTi-Formgedächtnislegierungen, Shaker Verlag, Aachen, Germany, 2008, pp. 17–95.
35. J.A. Shaw and S. Kyriakides: Acta Mater., 1997, vol. 45, pp. 683–700.10.1016/S1359-6454(96)00189-9 ↗
36. S. Gollerthan, M.L. Young, K. Neuking, U. Ramamurty, and G. Eggeler: Acta Mater., 2009, vol. 57, pp. 5892–97.10.1016/j.actamat.2009.08.015 ↗
37. A. Heckmann: Mikrostruktur und Ermüdung von NiTi-Formgedächtnislegierungen, VDI Verlag, Düsseldorf, Germany, 2003, pp. 81–82.
38. L.C. Brinson, I. Schmidt, and R. Lammering: J. Mech. Phys. Sol., 2004, vol. 52, pp. 1549–71.10.1016/j.jmps.2004.01.001 ↗
39. J. Olbricht, A. Schäfer, M.F.-X. Wagner, and G. Eggeler: Proc. SMST 2007, S. Miyazaki, ed., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 47–54.
40. A. Schäfer, M.F.-X. Wagner, J.L. Pelegrina, J. Olbricht, and G. Eggeler: Adv. Eng. Mater., 2010, vol. 12, pp. 453–59.10.1002/adem.201000063 ↗
41. S. Miyazaki and K. Otsuka: Phil. Mag., 1984, vol. 50, pp. 393–408.10.1080/01418618408244235 ↗
42. S. Miyazaki and K. Otsuka: Metall. Trans. A, 1986, vol. 17A, pp. 53–63.10.1007/BF02644442 ↗
43. S. Miyazaki and C.M. Wayman: Acta Metall., 1988, vol. 36, pp. 181–92.10.1016/0001-6160(88)90037-5 ↗
44. G.B. Stachowiak and P.G. McCormick: Acta Metall., 1988, vol. 36, pp. 291–97.10.1016/0001-6160(88)90006-5 ↗
45. P. Šittner, M. Landa, P. Lukáš, and V. Novák: Mech. Mater., 2006, vol. 38, pp. 475–92.10.1016/j.mechmat.2005.05.025 ↗
46. P. Šittner, P. Sedlák, M. Landa, V. Novák, and P. Lukáš: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 579–84.10.1016/j.msea.2006.02.200 ↗
47. P. Schlosser, D. Favier, H. Louche, L. Orgéas, and Y. Liu: Proc. ESOMAT 2009, P. Šittner, V. Paidar, L. Heller, and H. Seiner, eds., EDP Sciences, Les Ulis Cedex, France, 2009.
48. A. Dlouhy, J. Khalil-Allafi, and G. Eggeler: Phil. Mag. A, 2003, vol. 83, pp. 339–63.10.1080/0141861021000034531 ↗
49. A. Kröger, S. Dziaszyk, J. Frenzel, C. Somsen, A. Dlouhy, and G. Eggeler: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 452–56.10.1016/j.msea.2007.02.169 ↗
50. A.P. Hammersley: ESRF Internal Report ESRF98HA01T, FIT2D V9.129 Reference Manual V3.1, ESRF, Grenoble, France, 1998.
51. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D.H. Häusermann: High Pressure Res., 1996, vol. 14, pp. 235–48.10.1080/08957959608201408 ↗
52. A. Yawny, M. Sade, and G. Eggeler: Z. Metallkd., 2005, vol. 96, pp. 608–18.10.3139/146.101078 ↗
53. A. Condo, C. Somsen, J. Olbricht, G. Eggeler, and A. Dlouhy: Proc. ESOMAT 2009, P. Šittner, V. Paidar, L. Heller, and H. Seiner, eds., EDP Sciences, Les Ulis Cedex, 2009.
54. J.-P. Morniroli: Electron Diffraction, ver. 6.8m, Université de Lille, Lille, 2000.