Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels
Source abstract
Abstract
The effect of cold working on microstructure and structure and thereby on electrochemical behavior of metastable AISI 304L and stable AISI 316L austenitic stainless steels in two different solutions is presented here. The solution-annealed stainless steel (SS) plates were unidirectionally cold rolled at different rolling conditions (with or without interpass cooling and subzero temperature) up to 90 pct reduction in thickness. The X-ray diffraction (XRD) technique was employed to study textures and residual stress development in the stainless steels due to cold working and to quantify the volume fraction of α′-martensite phase formed in the metastable SS. Cold working introduced residual stress and developed texture in both stainless steels. The residual stress and volume fraction of strain-induced α′- martensite phase in 304L SS was varied with the rolling conditions. The study has shown that the type of textures developed in the two stainless steels influenced their electrochemical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. R.W. Hertzborg: Deformation, Fracture Mechanics of Engineering Materials, John Wiley & Sons Inc., New York, NY, 1989
2. J.W. Brooks, M.H. Loretto, R.E. Smallman: Acta Metall., 1997, vol. 27, pp. 1829–3810.1016/0001-6160(79)90073-7 ↗
3. D. Goodchild, W.T. Roberts, D.V. Wilson: Acta Metall., 1970, vol. 18, pp. 1137–45.10.1016/0001-6160(70)90104-5 ↗
4. M.A. Meyers, K.K. Chawla: Mechanical Behaviour of Materials, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1998
5. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley, New York, 1975
6. P. Mullner, C. Solenthaler: Mater. Sci. Eng. A, 1997, vol. 230, pp. 107–1510.1016/S0921-5093(97)00023-3 ↗
7. F.B. Pickering: Int. Mater. Rev., 1976, vol. 21, pp. 227–68
8. R.J. Brigham, W.J. Tozer: Corrosion, 1974, vol. 30, pp. 161–6610.5006/0010-9312-30.5.161 ↗
9. M.A. Streicher: Corrosion, 1974, vol. 30, pp. 77–9110.5006/0010-9312-30.3.77 ↗
10. L.Y.A. Seukins, E.G. Fel’dgandler: Metalloved. Term. Obra Met., 1968, vol. 11, pp. 10–13
11. A. Tryggve: J. Iron Steel Inst., 1954, vol. 177, pp. 165–74
12. R.P. Reed: Acta Metall., 1962, vol. 10, pp. 865–7710.1016/0001-6160(62)90101-3 ↗
13. R. Langneborg: Acta Metall., 1964, vol. 12, pp. 823–43.10.1016/0001-6160(64)90176-2 ↗
14. P. Marshal: Austenitic Stainless Steel: Microstructure and Mechanical Properties, Elsevier, London, 1984
15. I.C. Noyan, J.B. Cohen: Residual Stress Measurement by X-ray Diffraction and Interpretation, Springer Verlag, New York, NY, 1987
16. A. Bahadur, B. Ravi Kumar, S. Ghosh Chowdhury: Mater. Sci. Technol., 2004, vol. 20, pp. 387–9210.1179/026708304225012170 ↗
17. L.G. Schulz: J. Appl. Phys., 1949, vol. 20, pp. 1030–3310.1063/1.1698268 ↗
18. K. Pawlik and P. Ozga: LaboTex: The Texture Analysis Software, Göttinger Arbeiten zur Geologie und Paläontologie, SB4, 1999
19. K. Pawlik: Phys. Staus Solidi B, 1986, vol, 134, pp. 477–8310.1002/pssb.2221340205 ↗
20. A.H. Eichelman, F.C. Hull: J. Trans ASM, 1953, vol. 45, pp. 77–104
21. P.L. Manganon Jr., G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–8610.1007/BF02642003 ↗
22. P.L. Manganon Jr., G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1587–9410.1007/BF02642004 ↗
23. G.B. Olson, M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–1810.1016/0022-5088(72)90173-7 ↗
24. S.S. Hecker, M.G. Stout, K.P. Staudhammer, J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–2610.1007/BF02644427 ↗
25. G.B. Olson, M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–9510.1007/BF02672301 ↗
26. P.C. Maxwell, A. Goldberg, J.C. Shyne: Metall. Trans., 1974, vol. 5, pp. 1305–1710.1007/BF02646613 ↗
27. F. Lecroisey, A. Pineau: Metall. Trans., 1972, vol. 3, pp. 387–9610.1007/BF02642042 ↗
28. R.P. Reed: Acta Metall., 1962, vol. 10, pp. 865–7710.1016/0001-6160(62)90101-3 ↗
29. B. Cina: JISI, 1954, vol. 177, pp. 406–22
30. J.A. Venables: Phil Mag., 1962, vol. 7, pp. 35–4410.1080/14786436208201856 ↗
31. J. Dash, H.M. Otte: Acta Metall., 1963, vol. 11, pp. 1169–7810.1016/0001-6160(63)90044-0 ↗
32. L.E. Murr, K.P. Staudhammer, S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627–3510.1007/BF02644428 ↗
33. T. Suzuki, H. Kojima, K. Suzuki, T. Hashimoto, M. Ichihara: Acta Metall., 1977, vol. 25, pp. 1151–6210.1016/0001-6160(77)90202-4 ↗
34. J.R. Patel, M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–3810.1016/0001-6160(53)90083-2 ↗
35. H.M. Otte: Acta Metall., 1957, vol. 5, pp. 614–2710.1016/0001-6160(57)90108-6 ↗
36. M.W. Bowkett, S.R. Keown, D.R. Harries: Met. Sci., 1982, vol. 16, pp. 499–51710.1016/0036-9748(82)90257-5 ↗
37. K. Takashima, Y. Higo, S. Numomura: Phil. Mag., 1984, vol. 49 A, pp. 231–4110.1080/01418618408234925 ↗
38. H.C. Shin, T.K. Ha, Y.W. Chang: Scripta Mater., 2001, vol. 45, pp. 823–2910.1016/S1359-6462(01)01101-0 ↗
39. Z. Tourki, H. Bargui, H. Sidhom: J. Mater. Proc. Technol., 2005, vol. 166, pp. 330–3610.1016/j.jmatprotec.2003.08.010 ↗
40. J. Hirsch, K. Lucke: Acta Metall., 1988, vol. 36, pp. 2863–8210.1016/0001-6160(88)90172-1 ↗
41. J. Hirsch, K. Lucke: Acta Metall., 1988, vol. 36, pp. 2883–90410.1016/0001-6160(88)90173-3 ↗
42. Z.A. Foroulis, H.H. Uhlig: J. Electrochem. Soc., 1964, vol. 111, pp. 522–2810.1149/1.2426172 ↗
43. A. Barbucci, M. Delucchi, M. Panizza, M. Sacco, G. Cerisola: J. Alloys Compounds, 2001, vol. 317, pp. 607–1110.1016/S0925-8388(00)01396-7 ↗
44. S.S. Chouthai, K. Elayaperumal: J. Br. Corr., 1976, vol. 11, pp. 40–4310.1179/bcj.1976.11.1.40 ↗
45. U.R. Evans: Corrosion and Oxidation of Metals, Edward Arnold Ltd., London, 1960, pp. 386–89
46. B.C. Syrett, S.S. Wing: Corrosion, 1978, vol. 34, pp. 138–4510.5006/0010-9312-34.4.138 ↗
47. C.J. Semino, P. Pedeferri, G. Burstein, T.P. Hoar: Corr. Sci., 1979, vol. 19, pp. 1069–78.10.1016/S0010-938X(79)80096-7 ↗
48. J.C. Rowlands: Br. Corr. J., 1976, vol. 11, pp. 195–9810.1179/000705976798319694 ↗
49. U.K. Mudali, P. Shankar, S. Ningshen, R.K. Dayal, H.S. Khatak, Baldev Raj: Corr. Sci., 2002, vol. 44, pp. 2183–98.10.1016/S0010-938X(02)00035-5 ↗
50. U.K. Mudali, S. Ningshen, A.K. Tyagi, R.K. Dayal: Mater. Sci. Forum, 1999, vol. 318–320, pp. 495–50210.4028/www.scientific.net/MSF.318-320.495 ↗
51. B. Mazza, P. Pedeferri, D. Sinigaglia, A. Liganda, G.A. Mandora, G. Re, G. Taccani, D. Wenger: J. Electrochem. Soc., 1979, vol. 126, pp. 2075–8910.1149/1.2128863 ↗
52. A. Cigada, G. Rondelli, and B. Vicentini: Proc. Int. Conf. Martensitic Transformation, The Japan Institute of Metals, Sendai, Japan, 1986, pp. 527–32
53. C. Eckstein, A. Welss, D. Janke, and D. Peisker: Proc. Int. Congr. Stainless Steels 99, Science and Market, Chia Laguna Sardinia, Italy, June 6–9, 1999, Associaziona Italiana di Metallurgia, Italy, 1999, pp. 34–36
54. H.E. Hanninen: Int. Mater. Rev., 1979, vol. 3, pp. 85–13510.1179/095066079790136372 ↗
55. C.L. McBee, J. Krugher: Electrochim. Acta, 1972, vol. 17, pp. 1337–4110.1016/0013-4686(72)80079-3 ↗
56. S.V. Phadnis, A.K. Satpati, K.P. Muthe, J.C. Vyas, and Sundareshan: Corr. Sci., 2003, vol. 45, pp. 2467–8310.1016/S0010-938X(03)00099-4 ↗
57. A. Barbucci, G. Cerisola, P.L. Carbot: J. Electrochem. Soc., 2002, vol. 149, pp. 534–4210.1149/1.1516774 ↗
58. R. Singh, B. Ravi Kumar, A. Kumar, P.K. Dey, I. Chattoraj: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2441–4710.1007/s11661-003-0004-5 ↗