Martensitic Transformations and Mechanical and Corrosion Properties of Fe-Mn-Si Alloys for Biodegradable Medical Implants
Source abstract
Abstract
The Fe-Mn-Si alloys are promising materials for biodegradable metallic implants for temporary healing process in the human body. In this study, three different compositions are considered (Fe23Mn5Si, Fe26Mn5Si, and Fe30Mn5Si, all in wt pct). The phase composition analysis by XRD reveals e-martensite, α-martensite, and γ-austenite in various proportions depending on the manganese amount. The DSC study shows that the starting temperature of the martensitic transformation (Ms) of the alloys decreases when the manganese content increases (416 K, 401 K, and 323 K (143 °C, 128 °C, and 50 °C) for the Fe23Mn5Si, Fe26Mn5Si, and Fe30Mn5Si alloys, respectively). Moreover, mechanical compression tests indicate that these alloys have a much lower Young’s modulus (E) than pure iron (220 GPa), i.e., 145, 133, and 118 GPa for the Fe23Mn5Si, Fe26Mn5Si, and Fe30Mn5Si alloys, respectively. The corrosion behavior of the alloys is studied in Hank’s solution at 310 K (37 °C) using electrochemical experiments and weight loss measurements. The corrosion kinetics of the Fe-Mn-Si increases with the manganese content (0.48, 0.59, and 0.80 mm/year for the Fe23Mn5Si, Fe26Mn5Si, and Fe30Mn5Si alloys, respectively). The alloy with the highest manganese content shows the most promising properties for biomedical applications as a biodegradable and biomechanically compatible implant material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Y.F. Zheng, X.N. Gu, and F. Witte, Mater. Sci. Eng. R, 2014, vol. 77, pp. 1-34.10.1016/j.mser.2014.01.001 ↗
2. H. Li, Y. Zheng, and L. Qin, Prog. Nat. Sci. 2014, vol. 24, pp. 414-422.10.1016/j.pnsc.2014.08.014 ↗
3. M. Niinomi, Metall. Mater. Trans. A, 2002, vol. 33, pp. 477-486.10.1007/s11661-002-0109-2 ↗
4. H. Hermawan, D. Dubé, and D. Mantovani, Acta Biomater., 2010, vol. 6, pp.1693-7.10.1016/j.actbio.2009.10.006 ↗
5. M. Schinhammer, A.C. Hänzi, J.F. Löffler, and P.J. Uggowitzer, Acta Biomater., 2010, vol. 6, 1705-13.10.1016/j.actbio.2009.07.039 ↗
6. A. Francis, Y. Yang, S. Virtanen, and A. R. Boccaccini, J. Mater. Sci. 2015, vol. 26, pp. 138-53.
7. K. Otsuka, and C.M. Wayman: Shape Memory Materials, Cambridge Univ. Press, Cambridge, United Kingdom, 1999.
8. V. Brailovski, S. Prokoshkin, P. Terriault, and F. Trochu: Shape memory alloys: fundamentals, modelling and applications, Montreal: ETS Publ., Montreal, Canada, 2003.
9. H. Hermawan, A. Purnama, D. Dube, J. Couet, and D. Mantovani, Acta Biomater., 2010, vol. 6, pp. 1852-60.10.1016/j.actbio.2009.11.025 ↗
10. Y.H. Wen, H.B. Peng, D. Raabe, I. Gutierrez-Urrutia, J. Chen, and Y.Y. Du, Nat. Commun., 2014, vol. 5, 4964.10.1038/ncomms5964 ↗
11. C.H. Yang, H.C. Lin, K.M. Lin, and H.K. Tsai, Mater. Sci. Eng. A, 2008, vol. 497, pp. 445-450.10.1016/j.msea.2008.07.057 ↗
12. T. Niendorf, F. Brenne, P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, and H.J. Maier, Metall. Mater. Trans. A, 2015, vol. 46, pp.2829-2833.10.1007/s11661-015-2932-2 ↗
13. F. Witte, Acta Biomater., 2010, vol. 6, pp. 1680-92.10.1016/j.actbio.2010.02.028 ↗
14. A.H. Yusop, A.A. Bakir, N.A. Shaharom, M.R. Abdul Kadir, and H. Hermawan, Int. J. Biomater., 2012, article number 641430.10.1155/2012/641430 ↗
15. J. Hufenbach, H. Wendrock, F. Kochta, U. Kühn, and A. Gebert, Mater. Lett., 2017, vol. 186, pp. 330-333.10.1016/j.matlet.2016.10.037 ↗
16. B. Liu, Y.F. Zheng, and Liquan Ruan, Mater. Lett., 2011, vol. 65, pp. 540-3.10.1016/j.matlet.2010.10.068 ↗
17. M. Kaya, and O. Cakmak, Metall. Mater. Trans. A, 2016, vol. 47, pp. 1499-1503.10.1007/s11661-015-3318-1 ↗
18. T. Kraus, F. Moszner, S. Fischerauer, M. Fiedler, E. Martinelli, J. Eichler, F. Witte, E. Willbold, M. Schinhammer, M. Meischel, P.J. Uggowitzer, J.F. Löffler, and A. Weinberg, Acta Biomater., 2014, vol. 10, pp. 3346-53.10.1016/j.actbio.2014.04.007 ↗
19. F. Matassi, A. Botti, L. Sirleo, C. Carulli, and M. Innocenti, Clin. Cases Miner. Bone Metab., 2013, vol. 10, pp. 111-115.
20. J. Wan, and S. Chen, Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 303-312.10.1016/j.cossms.2006.07.005 ↗
21. V.V. Bliznuk, V.G. Gavriljuk, B.D. Shanina, A.A. Konchits, and S.P. Kolesnik, Acta Mater., 2003, vol. 51, pp. 6095-6103.10.1016/S1359-6454(03)00430-0 ↗
22. V. Brailovski, S. Prokoshkin, M. Gauthier, K. Inaekyan, S. Dubinskiy, M. Petrzhik, and M. Filonov, Mater. Sci. Eng. C, 2011, vol. 31, pp. 643-57.10.1016/j.msec.2010.12.008 ↗
23. H. Hermawan, M. Moravej, D. Dubé, M. Fiset, and D. Mantovani, Adv. Mater. Res., 2007, vols. 15-17, pp. 113-118.10.4028/www.scientific.net/AMR.15-17.113 ↗
24. H. Hermawan, D. Dubé, and D. Mantovani, J. Biomed. Mater. Res., 2010, vol. 93A, pp. 1-11.10.1002/jbm.a.32224 ↗
25. V.G. Gavriljuk, V.V. Bliznuk, B.D. Shanina, and S.P. Kolesnik, Mater. Sci. Eng. A, 2005, vol. 406, pp. 1-10.10.1016/j.msea.2005.05.043 ↗
26. G. Wang, H. Peng, C. Zhang, S. Wang, and Y. Wen, Smart Mater. Struct., 2016, vol. 25, 5013.10.1088/0964-1726/25/7/075013 ↗
27. V. Fuster, A.V. Druker, A. Baruj, J.Malarría, and R. Bolmaro, Mater. Charact., 2015, vol. 109, pp. 128-137.10.1016/j.matchar.2015.09.026 ↗
28. D.M. Gordin, T. Gloriant, Gh. Nemtoi, R. Chelariu, N. Aelenei, A. Guillou, and D. Ansel, Mater. Lett., 2005, vol. 59, pp. 2936-2941.10.1016/j.matlet.2004.09.063 ↗
29. M.I.Z. Ridzwan, S. Solehuddin, A.Y. Hassan, A.A. Shokri, and M.N. Ibrahim, J. Med. Sci., 2007, vol. 7, pp. 460-467.10.3923/jms.2007.460.467 ↗
30. D.T. Reilly, and A.H. Burstein, J. Biomech., 1975, vol. 8, pp.393-405.10.1016/0021-9290(75)90075-5 ↗
31. A. Druker, A. Baruj, and J. Malarría, Mater. Charact., 2010, vol. 61, pp. 603-612.10.1016/j.matchar.2010.03.005 ↗
32. M. Schinhammer, C.M. Pecnik, F. Rechberger, A.C. Hanzi, J.F. Loffler, and P.J. Uggowitzer, Acta Mater., 2012, vol. 60, pp. 2746-56.10.1016/j.actamat.2012.01.041 ↗
33. F. Moszner, A.S. Sologubenko, M. Schinhammer, C. Lerchbacher, A.C. Hanzi, H. Leitner, P.J. Uggowitzer, and J.F. Loffler, Acta Mater., 2012, vol. 59, pp. 981-991.10.1016/j.actamat.2010.10.025 ↗
34. B.C. Maji, M. Krishnan, M. Sujata, Gouthama, and R.K. Ray, Metall. Mater. Tans. A, 2013, vol. 44A, pp. 172–85.10.1007/s11661-012-1378-z ↗
35. J. Lévesque, H. Hermawan, D. Dubé, and D. Mantovani, Acta Biomater., 2008, vol. 4, pp. 284-95.10.1016/j.actbio.2007.09.012 ↗
36. S.Stanciu, A. Ursanu, L.C.Trinca, T.A. Elena, S. Carmen, C. Munteanu, N. Cimpoesu, D. Acatrinei, E.V. Sindilar, T. Stanciu, M. Fantanariu, and L. Topliceanu, Environ. Eng. Manage. J., 2016, vol. 15(5), pp. 973-80.10.30638/eemj.2016.106 ↗
37. Y.P. Feng, A. Blanquer, J. Fornell, H. Zhang, P. Solsona, M.D. Barό, S. Suriñach, E. Ibáñez, E. García-Lecina, X. Wei, R. Li, L.L. Barrios, E. Pellicer, and C. Nogués, J. Sort, J. Mater. Chem. B, 2016, vol. 4, pp. 6402-12.10.1039/C6TB01951J ↗