Thermodynamic Driving Force of the γ → ε Transformation and Resulting MS Temperature in High-Mn Steels
Source abstract
Abstract
Two-stage transformation-induced plasticity (TRIP) behavior characterized by the martensitic transformations, γ → e → α′, has produced exceptional tensile strengths and work hardening rates in Fe-14 wt pct Mn alloys containing Al and Si. A regular solution model has been developed to accurately calculate ΔG γ → e for a given TRIP alloy and the calculated driving force is used to determine the M S e temperature. The regular solution model developed here predicted driving forces that corresponded well with reported microstructures and behavior of seven FeMnAlSiC steels from literature when considered in conjunction with nucleating defect critical size and material process history. The role of available nucleating defects of critical size, n*, has been linked to the stacking fault energy necessary to observe the γ → e transformation and the M S e temperature. The regular solution model provided excellent correlation between calculated M S e temperatures and those measured experimentally in 89 alloys from literature and suggested n* = 4 is the critical size of a nucleating defect in annealed microstructures. Factors affecting the γ → e transformation and the M S e temperature have been identified as prior austenite grain size, dislocation substructure due to prior deformation, and solute segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. [1] J. Fekete and J. Hall: NIST Internal Report 6668, National Institute of Standards and Technology, Washington, DC, May 2012.
2. [2] M.C. McGrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4634-43.10.1007/s11661-013-1820-x ↗
3. O. Grässel, G. Frommeyer, C. Derder, and H. Hofmann: J.Phys. IV France, 1997, vol. 7, pp. 383-88.10.1051/jp4:1997560 ↗
4. D.C. Van Aken, S.T. Pisarik, and M.C. McGrath: Proc. Intl. Symp. Develop. AHSS, Vail, Colorado, 2013, pp. 119–29.
5. [5] L. Bracke, L. Kestens, and J. Penning: Scripta Mater., 2007, vol. 57, pp. 385–88.10.1016/j.scriptamat.2007.05.003 ↗
6. S.T. Pisarik, D.C. Van Aken, K. Limmer, and J. Medvedeva: Proc. of AISTech 2014, 2014, pp. 3013–23.
7. [7] S. Kibey, J. Liu, M. Curtis, D. Johnson and H. Sehitoglu: Acta Mater., 2006, vol. 54, pp. 2991-3001.10.1016/j.actamat.2006.02.048 ↗
8. [8] G. Olson and M. Cohen: Metall. Mater. Trans. A, 1976, vol. 7, pp. 1897-1904.
9. W.S. Yang and C.M Wan (1990) J. Mater. Sci. 25, pp. 1821-23.10.1007/BF01045392 ↗
10. [10] P.J. Ferreira and P. Mullner: Acta Mater., 1998, vol. 46, pp. 4479-84.10.1016/S1359-6454(98)00155-4 ↗
11. [11] J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108-18.10.1016/j.actamat.2007.07.015 ↗
12. [12] H. Fujita and S. Ueda: Acta Metall., 1972, vol. 20, pp. 759-67.10.1016/0001-6160(72)90104-6 ↗
13. [13] L. Kaufman and M. Cohen: Progr. Metal. Phys., 1958, vol. 7, pp. 165-246.10.1016/0502-8205(58)90005-4 ↗
14. [14] A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vols. 483-484, pp. 184-87.10.1016/j.msea.2006.12.170 ↗
15. [15] J.H. Jun and C.S. Choi: Mater. Sci. Eng. A, 1998, vol. 257, pp. 535-56.10.1016/S0921-5093(98)00994-0 ↗
16. [16] H.S. Yang, J.H. Jang, H.K.D.H. Bhadeshia, and D.W. Suh: CALPHAD, 2012, vol. 36, pp. 16-22.10.1016/j.calphad.2011.10.008 ↗
17. [17] J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359-71.10.1007/BF02814874 ↗
18. [18] Y.K. Lee and C.S. Choi: Metall. Mater. Trans. A, 2000, vol. 31, pp. 355-60.10.1007/s11661-000-0271-3 ↗
19. [19] S. Allain, J.P. Chateau, O. Bouaziz, S. Migot and N. Guelton: Mater. Sci. Eng. A, 2004, vols. 387-389, pp.158-62.10.1016/j.msea.2004.01.059 ↗
20. [20] A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317-425.10.1016/0364-5916(91)90030-N ↗
21. [21] L. Kaufman: CALPHAD, 1977, vol. 1, pp. 7-89.10.1016/0364-5916(77)90018-9 ↗
22. [22] B. Sundman, B. Jansson, and J.O. Anderson: CALPHAD, 1985, vol. 9, pp. 153-190.10.1016/0364-5916(85)90021-5 ↗
23. [23] K. Ishida and T. Nishizawa: Trans. Jpn. Inst. Met., 1974, vol. 15, pp. 225-231.10.2320/matertrans1960.15.225 ↗
24. [24] P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Trans. A, 1986, vol. 16A, pp. 1725-37.10.1007/BF02817271 ↗
25. ASTM E 8/E 8M-08, Standard Test Methods for Tension Testing of Metallic Materials.
26. [26] A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scripta Mater., 2004, vol. 50, pp. 1445-49.10.1016/j.scriptamat.2004.03.011 ↗
27. [27] G. Frommeyer, U. Brux, and P. Neumann: ISIJ Int., 2003, vol. 3, pp. 438-46.10.2355/isijinternational.43.438 ↗
28. E.Yang, H. Zurob, and J. McDermid: Proc. of MS&T’10, 2010, pp. 1914–25.
29. [29] T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063-71.10.1016/S1359-6454(03)00117-4 ↗
30. [30] X.H. Min, T. Sawaguchi, K. Ogawa, T. Maruyama, F.X. Yin, and K. Tsuzaki: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5251-58.10.1016/j.msea.2011.03.059 ↗
31. K. Ogawa and S. Kajiwara (1993) Mater. Trans. JIM 34:1169-76.10.2320/matertrans1989.34.1169 ↗
32. [32] N. Igata, N. Urahashi, M. Sasaki, and Y. Kogo: J. Alloys Compd., 2003, vol. 355, pp. 85-89.10.1016/S0925-8388(03)00282-2 ↗
33. [33] H. Okada, H. Sahashi, I.S. Kim, C.Y. Kang, N. Igata, K. Miyahara: Mater. Sci. Eng. A, 2004, vol. 370, pp. 519-23.10.1016/j.msea.2003.08.097 ↗
34. K.R. Limmer, D.C. Van Aken, and J.E Medvedeva: Proc. of AISTech 2014, 2014.
35. [35] Q.X. Dai, X.N. Cheng, Y.T. Zhao, X.M. Luo, and Z.Z. Yuan: Mater. Charact., 2004, vol. 52, pp. 349-54.10.1016/j.matchar.2004.06.008 ↗
36. [36] S.H. Baik, J.C. Kim, K.K. Jee, M.C. Shin, and C.S. Choi: ISIJ Int., 1997, vol. 37, pp. 519-22.10.2355/isijinternational.37.519 ↗
37. [37] Y. Tomota, M. Stum, and J.W. Morris Jr.: Metall. Trans. A, 1986, vol. 17, pp. 537-47.10.1007/BF02643961 ↗
38. [38] Y.K. Lee, J.H. Jun and C.S. Choi: Scripta Mater., 1996, vol. 35, pp. 825-30.10.1016/1359-6462(96)00231-X ↗
39. [39] Y.K. Lee, J.H. Jun and C.S. Choi: ISIJ Int., 1997, vol. 37, pp. 1023-30.10.2355/isijinternational.37.1023 ↗
40. [40] J.H. Jun and C.S. Choi: Scripta Mater., 1998, vol. 38, pp. 543-49.10.1016/S1359-6462(97)00525-3 ↗
41. [41] J.H. Jun and C.S. Choi: Mater. Sci. Eng. A, 1998, vol. 252, pp. 133-38.10.1016/S0921-5093(98)00648-0 ↗
42. [42] S. Cotes, M. Sade and A.F. Guillermet: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1957-69.10.1007/BF02670667 ↗
43. [43] H. Umebayashi and Y. Ishikawa: J. Phys. Soc. Jpn, 1966, vol. 21, pp. 1281-94.10.1143/JPSJ.21.1281 ↗
44. S. Takaki, H. Nakatsu and T. Tokunaga (1993) Mater. Trans. JIM, 34: 489-95.10.2320/matertrans1989.34.489 ↗
45. [45] S. Cotes, A.F. Guillermet and M. Sade: J. Alloys Compd., 1998, vol. 278, pp. 231-38.10.1016/S0925-8388(98)00580-5 ↗
46. [46] I.Y. Georgiyeva, N.A. Sorokina and V.I. Gal’tsova: Phys. Met. Metallogr., 1981, vol. 49, pp. 178-81.
47. [47] A.P. Gulyaev, T.F. Volynova and I.Y. Georgiyeva: Met. Sci. Heat Treat., 1978, vol. 20, pp. 179-82.10.1007/BF00777087 ↗
48. [48] A.R. Troiano and F.T. McGuire: Trans. ASM, 1943, vol. 31, pp. 340-64.
49. [49] I.N. Bogachev and L.S. Malinov: Phys. Met. Metallogr., 1962, vol. 14, pp. 828-33.
50. [50] I.N. Bogachev, V.F. Yegolayev, G.Y. Zvigintseva and L.V. Zhuravel: Phys. Met. Metallogr., 1968, vol. 28, pp. 885-88.
51. [51] K. Tsuzaki, S. Fukasaku, Y. Tomota and T. Maki: Trans. JIM, 1991, vol. 32, pp. 222-28.10.2320/matertrans1989.32.222 ↗
52. [52] M. Fujita and I. Uchiyama: Tetsu-to-Hagane, 1974, vol. 60, pp. 525-39.10.2355/tetsutohagane1955.60.5_525 ↗
53. [53] P. Donner, E. Hornbogen and M. Sade: J. Mater. Sci., 1989, vol. 8, pp. 37-40.
54. A. Baruj, S. Cotes, M. Sade and A.F. Guillermet: J. Phys. Colloq., 1995, vol. 5, pp. 373–378.
55. M. Acet, T. Schneider, B. Gehrmann and E.F. Wassermann: J. Phys. Colloq., 1995, vol. 5, pp. 379–84.
56. K.K. Jee, W.Y. Jang, S.H. Baik, M.C. Shin and C.S. Choi: J. Phys. Colloq., 1995, vol. 5, pp. 385–90.
57. Y. Tomota and K. Yamaguchi: J. Phys. Colloq., 1995, vol. 5, pp. 421–26.
58. [58] Y.S. Zhang, X. Lu, X. Tian and Z. Qin: Mater. Sci. Eng. A, 2002, vol. 334, pp. 19-27.10.1016/S0921-5093(01)01781-6 ↗
59. [59] J. Nakano: Sci. Technol. Adv. Mater., 2013, vol. 14, 014207.10.1088/1468-6996/14/1/014207 ↗
60. [60] M. Palumbo: CALPHAD, 2008, vol. 32, pp. 693-709.10.1016/j.calphad.2008.08.006 ↗
61. [61] X. Tian and Y. Zhang: Mat. Sci. Eng. A., 2009, vol. 516, pp. 78-83.10.1016/j.msea.2009.02.032 ↗
62. [62] M. Koyama, T. Sawaguchi, and K. Tsuzaki: Mat. Sci. Eng. A., 2011, vol. 528, pp. 2882-86.10.1016/j.msea.2010.12.065 ↗
63. P. Y. Volosevich, V.N. Gridnev and Y.N Petrov (1975) Phys. Met. Metallogr. 40:554-59.
64. C.W Sinclair, W.J. Poole and Y. Brechet: Scripta Mater., 2006, vol. 55, pp. 739-42.10.1016/j.scriptamat.2006.05.018 ↗