journal article·2014-01

Microstructure and Tribological Properties of AlCoCrFeNiTi0.5 High-Entropy Alloy in Hydrogen Peroxide Solution

Y. Yu, W. M. Liu, T. B. Zhang, J. S. Li, J. Wang, H. C. Kou, J. Li

Publisher page

Abstract

Microstructure and tribological properties of an AlCoCrFeNiTi0.5 high-entropy alloy in high-concentration hydrogen peroxide solution were investigated in this work. The results show that the sigma phase precipitates and the content of bcc2 decrease during the annealing process. Meanwhile, the complex construction of the interdendrite region changes into simple isolated-island shape, and much more spherical precipitates are formed. Those changes of microstructure during the annealing process lead to the increase of hardness of this alloy. In the testing conditions, the AlCoCrFeNiTi0.5 alloy shows smoother worn surfaces and steadier coefficient of friction curves than does the 1Cr18Ni9Ti stainless steel, and SiC ceramic preserves better wear resistance than ZrO2 ceramic. After annealing, the wear resistance of the AlCoCrFeNiTi0.5 alloy increases coupled with SiC counterface but decreases with ZrO2 counterface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M. Ventura and P. Mullens: 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Exhibit, American Institute of Aeronautics and Astronautics (AIAA), Los Angeles, CA, 1999, pp. 2880–92.
2. M. Ventura, E. Wernimont, S. Heister, and S. Yuan: 43th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Exhibit, American Institute of Aeronautics and Astronautics (AIAA), Los Angeles, CA, 2007, vol. 5468, pp. 54–68.
3. C.Q. Yuan, J. Li, C.L. Dong, and X.P. Yan: Wear, 2011, vol. 271, pp. 1617–22.10.1016/j.wear.2011.01.048 ↗
4. R. Gostowski: Thermochim. Acta, 2003, vol. 404, pp. 279–81.10.1016/S0040-6031(03)00121-7 ↗
5. J. Li, S. Hu, D. Wang, X.M. Sun, and J. Li: Mater. Prot., 2009, vol. 42, pp. 7–9.
6. Y.G. Shi, H.C. Kou, H.T. Duan, T.B. Zhang, J.S. Li, R. Hu, and J. Li: Tribology, 2011, vol. 31, pp. 381–87.
7. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chan: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
8. W.Y. Tang and J.W. Yeh: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1479–86.10.1007/s11661-009-9821-5 ↗
9. S. Singh, N. Wanderka, B.S. Murty, U. Glatzel, and J. Banhart: Acta Mater., 2011, vol. 59, pp. 182–90.10.1016/j.actamat.2010.09.023 ↗
10. M.H. Chuang, M.H. Tsai, W.R. Wang, S.J. Lin, and J.W. Yeh: Acta Mater., 2011, vol. 59, pp. 6308-17.10.1016/j.actamat.2011.06.041 ↗
11. C.J. Tong, M.R. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1263–71.10.1007/s11661-005-0218-9 ↗
12. Q.H. Li, T.M. Yue, Z.N. Guo, and X. Lin: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1767–78.10.1007/s11661-012-1535-4 ↗
13. H. Duan, Y. Wu, M. Hua, C. Yuan, D. Wang, J. Tu, H. Kou, and J. Li: Wear, 2013, vol. 297, pp. 1045–51.10.1016/j.wear.2012.11.014 ↗
14. J.M. Wu, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, and H.C. Chen: Wear, 2006, vol. 261, pp. 513–19.10.1016/j.wear.2005.12.008 ↗
15. M.H. Chuang, M.H. Tsai, C.W. Tsai, N.H. Yang, S.Y. Chang, J.W. Yeh, S.K. Chen, and S.J. Lin: J. Alloy Compd., 2013, vol. 551, pp. 12–18.10.1016/j.jallcom.2012.09.133 ↗
16. M.H. Tsai, H. Yuan, G. Cheng, W. Xu, W.W. Jian, M.H. Chuang, C.C. Juan, A.C. Yeh, S.J. Lin, and Y. Zhu: Intermetallics, 2013, vol. 33, pp. 81–86.10.1016/j.intermet.2012.09.022 ↗
17. Y.J. Zhou, Y. Zhang, Y.L. Wang, and G.L. Chen: Appl. Phys. Lett., 2007, vol. 90, pp. 1–3.
18. Y.Y. Chen, T. Duval, U.D. Hung, J.W. Yeh, and H.C. Shih: Corros. Sci., 2005, vol. 47, pp. 2257–79.10.1016/j.corsci.2004.11.008 ↗
19. Y. Yu, F.Q. Xie, T.B. Zhang, H.C. Kou, R. Hu, and J.S. Li: Rare Met. Mater. Eng., 2012, vol. 41, pp. 862–86.
20. K.H. Zum Gahr, R. Blattner, D.H. Hwang, and K. Pöhlmann: Wear, 2001, vol. 250, pp. 299–310.10.1016/S0043-1648(01)00595-6 ↗
21. H. Chen, Y.F. Zhang, and C.X. Ding: Wear, 2002, vol. 253, pp. 885–93.10.1016/S0043-1648(02)00221-1 ↗
22. M.T. Constantine and E.F.C. Cain: Hydrogen Peroxide Handbook, Final Report, Air Force Rocket Propulsion Laboratory Research (AFRPL), Edwards, CA, 1967, p. 165.
23. C. Li and M.J. Li: J. Raman Spectrosc., 2002, vol. 33, pp. 301–08.10.1002/jrs.863 ↗
24. M. Scherge, D. Shakhvorostov, and K. Pöhlmann: Wear, 2003, vol. 255, pp. 395–400.10.1016/S0043-1648(03)00273-4 ↗
25. S.Z. Wen and P. Huang: Principles of Tribology, 4th ed., Tsinghua Press, Beijing, 2012, p. 226.
26. H.F. Sheng, M. Gong, and L.M. Peng: Mater. Sci. Eng., A, 2013, vol. 567, pp. 14–20.10.1016/j.msea.2013.01.006 ↗
27. Y.P. Wang, B.S. Li, and H.Z. Fu: Adv. Eng. Mater., 2009, vol. 11, pp. 641–44.10.1002/adem.200900057 ↗
28. J. Zhou, Y. Zhang, T.N. Kim, and G.L. Chen: Mater. Lett., 2008, vol. 62, pp. 2673–76.10.1016/j.matlet.2008.01.011 ↗
29. A. Manzoni, H. Daoud, S. Mondal, S. van Smaalen, R. Völkl, U. Glatzel, and N. Wanderka: J. Alloy Compd., 2013, vol. 552, pp. 430–36.10.1016/j.jallcom.2012.11.074 ↗
30. C.Y. Hsu, T.S. Sheu, J.W. Yeh, and S.K. Chen: Wear, 2010, vol. 268, pp. 653–59.10.1016/j.wear.2009.10.013 ↗
31. M. Chen, B. Hallstedt, and L.J. Gauckler: Solid State Ionics, 2004, vol. 170, pp. 255–74.10.1016/j.ssi.2004.02.017 ↗
32. C. Madivate, A.M. Malate, S. Verryn, and M. Loubser: B. Chem. Soc. Ethiopia, 2004, vol. 18, pp. 73–80.
33. N.K. Myshkin, M.I. Petrokovets, and A.V. Kovalev: Tribol. Int., 2005, vol. 38, pp. 910–12.10.1016/j.triboint.2005.07.016 ↗
34. F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids, 1st ed., Clarendon Press, Oxford, United Kingdom, 1964, p. 544.
35. A. Kubota, M. Yoshimura, S. Fukuyama, C. Iwamoto, and M. Touge: Precis. Eng., 2012, vol. 36, pp. 137–40.10.1016/j.precisioneng.2011.09.003 ↗
36. J. Xu and K. Kato: Wear, 2000, vol. 245, pp. 61–75.10.1016/S0043-1648(00)00466-X ↗