journal article·2014-03

Effect of Austenite Pancaking on the Microstructure, Texture, and Bendability of an Ultrahigh-Strength Strip Steel

Antti Juhani Kaijalainen, Pasi Suikkanen, L. Pentti Karjalainen, John J. Jonas

Publisher page

Abstract

The effect of austenite pancaking in the non-recrystallization regime on microstructure and texture evolution and thereby on bendability was investigated in an ultrahigh-strength strip steel with a martensitic-bainitic microstructure. The results indicate that an increase in rolling reduction (Rtot) below the non-recrystallization temperature, which improves the strength and toughness properties, increases the intensities of the ~{554}〈225〉α and ~{112}〈110〉α texture components along the strip centerline and of the ~{112}〈111〉α component at the surface region. Even with the highest Rtot of 79 pct, the bendability along the rolling direction was good, but the preferred alignment of rod-shaped MA constituents along the rolling direction led to a dramatic decrease in the bendability transverse to the rolling direction, with severe cracking occurring even at small bending angles. The early cracking is attributed to localization of the strain in narrow shear bands. It is concluded that the Rtot value has to be limited to guarantee successful bendability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. H. Asahi, T. Hara, M. Sugiyama, N. Maruyama, Y. Terada, H. Tamehiro, K. Koyama, S. Ohkita, H. Morimoto, K. Tomioka, N. Doi, M. Murata, N. Ayukawa, H. Akasaki, D.P. Fairchild, M.L. Macia, C.W. Petersen, J.Y. Koo, N.V. Bangaru, and M.J. Luton: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 11–17.
2. M. Hemmilä, R. Laitinen, T. Liimatainen, and D. Porter: Proc. 1st Int. Conf. Super-High Strength Steels, Rome, Italy, 2005.
3. A.J. Kaijalainen, P.P. Suikkanen, L.P. Karjalainen, J.I. Kömi, and A.J. DeArdo: Proc. 2nd Int. Conf. Super-High Strength Steels, 2010, Peschiera del Garda, Italy.
4. A.J. Kaijalainen, P.P. Suikkanen, T.J. Limnell, L.P. Karjalainen, J.I. Kömi, and D.A. Porter: J. Alloys Compd., 2012, DOI:10.1016/j.jallcom.2012.03.030.10.1016/j.jallcom.2012.03.030 ↗
5. J. Heikkala and A. Väisänen: Proc. 11th Biennial Conf. on Engineering Systems Design and Analysis, 2012, Nantes, France.
6. A. Kaijalainen, P. Karjalainen, D. Porter, P. Suikkanen, J. Kömi, V. Kesti, and T. Saarinen: Proc. 8th Int. Conf. Clean Steel, 2012, Budapest, Hungary.
7. R.D.K. Misra, N. Nathani, F. Siciliano, and T. Carneiro: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3024–29.10.1007/s11661-004-0045-4 ↗
8. K. Yamazaki, Y. Mizuyama, M. Oka, H. Tsuchiya, and H. Yasuda: Nippon Steel Tech. Rep., 1995, vol. 64, pp. 37–44.
9. K. Sugimoto, R. Kikuchi, M. Tsunezawa, S. Hashimoto, T. Kashima and S. Ikeda: Tetsu-to-Hagane, 2003, vol. 89, pp. 1065–70.10.2355/tetsutohagane1955.89.10_1065 ↗
10. K. Sugimoto, B. Yu, Y. Mukai and S. Ikeda: ISIJ Int., 2005, vol. 45, pp. 1194–1200.10.2355/isijinternational.45.1194 ↗
11. M. Takahashi: Nippon Steel Tech. Rep., 2003, vol. 88, pp. 2–7.
12. M. Kaupper and M. Merklein: CIRP Ann. Manuf. Technol., 2013, vol. 62, pp. 247–50.10.1016/j.cirp.2013.03.049 ↗
13. J. Steninger and A. Melander: Scand. J. Metall., 1982, vol. 11, pp. 55–71.
14. C. Soyarslan, M. Malekipour Gharbi and A.E. Tekkaya: Int. J. Solids Struct., 2012, vol. 49, pp. 1608–26.10.1016/j.ijsolstr.2012.03.009 ↗
15. M.J. EricksonKirk, M.T. EricksonKirk, S. Rosinski, and J. Spanner: J. Pressure Vessel Technol., 2009, vol. 131.10.1115/1.3109987 ↗
16. M. Somani, D.A. Porter, J. Pyykkönen, J.M. Tarkka, J.I. Kömi, T.A. Intonen, and L.P. Karjalainen: Proc. Int. Conf. on Microalloyed Steels: Processing, Microstructure, Properties and Performance, 2007, Pittsburgh, USA, pp. 95–106.
17. B. Mintz, J. Lewis, and J.J. Jonas: Mater. Sci. Technol., 1997, vol. 13, pp. 379–88.10.1179/mst.1997.13.5.379 ↗
18. C. Ghosh, V.V. Basabe, J.J. Jonas, Y.-M. Kim, I.-H. Jung, and S. Yue: Acta Mater., 2013, vol. 61, pp. 2348–62.10.1016/j.actamat.2013.01.006 ↗
19. J.J. Jonas, C. Ghosh, and V.V. Basabe: Steel Res. Int., 2012, vol. 83, pp. 1–6.
20. S. Zajac, V. Schwinn, and K-H. Tacke: Mater. Sci. Forum, 2005, vol. 500–501, pp. 387–94.10.4028/www.scientific.net/MSF.500-501.387 ↗
21. M.J.W. Green, R. Kuziak, P.F. Morris, and M. Pietrzyk: 4th Int. Conf. Thermomechanical Processing of Steels, 2012, Sheffield, UK.
22. H.J. McQueen, E.V. Konopleva, and V.M. Khlestov: Int. Symposium on Steel for Fabricated Structures, 1999, Cincinnati, USA, pp. 172–79.
23. L. Meyer, W. Münschenborn, and U. Schriever: Thermomechanical Processing in Theory, Modelling and Practice, Stockholm, Sweden, 1996, pp. 93–120.
24. P.J. Hurley, P.D. Hodgson, and B.C. Muddle: Scripta Mater., 1999, vol. 40, pp. 433–38.10.1016/S1359-6462(98)00442-4 ↗
25. P.J. Hurley and P.D. Hodgson: Mater. Sci. Eng. A, 2001, vol. 302A, pp. 206–14.10.1016/S0921-5093(00)01823-2 ↗
26. I. Kozasu, C. Ouchi, T. Sampei, and T. Okita: Microalloying’75, Union Carbide Co., New York, NY, 1977, pp. 100–14.
27. T. Furuhara, H. Kawata, S. Morito, G. Miyamoto, and T. Maki: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1003–13.10.1007/s11661-008-9510-9 ↗
28. R.K. Ray and J.J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
29. R.K. Ray, J.J. Jonas, M.P.Butron-Guillen, and J. Savoie: ISIJ Int., 1994, vol. 34, pp. 927–42.10.2355/isijinternational.34.927 ↗
30. C.G. Kang, H.G. Kang, H.C. Kim, M.Y. Huh, and H.G. Suk: J. Mater. Process. Technol., 2007, vol. 187-188, pp. 542-45.10.1016/j.jmatprotec.2006.11.096 ↗
31. L. Kestens and J.J. Jonas: ASM Handbook vol. 14A, Metalworking: Bulk Forming, 2005, pp. 685–700.10.31399/asm.hb.v14a.a0004029 ↗
32. T. Sakai, Y. Saito, and K. Kato: Trans. ISIJ, 1987, vol. 27, pp. 520–25.10.2355/isijinternational1966.27.520 ↗
33. D. Raabe: J. Mater. Sci., 1995, vol. 30, pp. 47–52.10.1007/BF00352130 ↗
34. N.J. Wittridge and J.J. Jonas: Acta Mater., 2000, vol. 48, pp. 2737–49.10.1016/S1359-6454(99)00460-7 ↗
35. C. Därmann-Novak and B. Engl: Steel Res., 1991, vol. 62, pp. 576–79.10.1002/srin.199100452 ↗
36. M.S. Joo, D.-W. Suh, J.H. Bae, N. Sanchez Mourino, R. Petrov, L.A.I. Kestens, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 556A, pp. 601–06.10.1016/j.msea.2012.07.033 ↗
37. S.T. Kimmins and D.J. Gooch: Met. Sci., 1983, vol. 17, pp. 519–32.10.1179/030634583790420484 ↗
38. I. Lischewski, D. M. Kirch, A. Ziemons, and G. Gottstein: Applications of Texture Analysis, Wiley, Hoboken, NJ, 2008, pp. 95–102.10.1002/9780470444214.ch10 ↗
39. I.L. Dillamore, J.G. Roberts, and A.C. Bush: Met. Sci., 1979, vol. 13, pp. 73–7.10.1179/msc.1979.13.2.73 ↗
40. S.L. Semiatin and J.J. Jonas: Formability and Workability of Metals: Plastic Instability and Flow Localization, ASM, Metals Park, OH, 1984, p. 299.
41. M. Li and A. Chandra: J. Mater. Process. Technol., 1999, vol. 96, pp. 133–38.10.1016/S0924-0136(99)00321-0 ↗
42. M. Kuroda and V. Tvergaard: Int. J. Plasticity, 2007, vol. 23, pp. 244–72.10.1016/j.ijplas.2006.03.014 ↗
43. D.V. Wilson: Proc. Conf. Effect of second-phase particles on the mechanical properties of steel, 1971, London, UK, pp. 28–36.
44. J.C. Herman, A. De Paepe, and V. Leroy: Proc. 2nd Int. Conf. “Thermomechanical Processing of Steels and Other Materials-THERMEC’97, 1997, University of Wollongong, Australia, pp. 507–17.
45. S. Hashimoto, T. Yakushiji, T. Kashima, and K. Hosami: Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, 1988, Tokyo, Japan, vol. 2, pp. 652.