journal article·2008-07

Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions

Manuel V. Canté, José E. Spinelli, Ivaldo L. Ferreira, Noé Cheung, Amauri Garcia

Publisher page

Abstract

Three Al-Ni hypoeutectic alloys were directionally solidified under upward unsteady-state heat-flow conditions. Primary (λ1) and secondary (λ2) dendrite arm spacings were measured along the castings for all alloys and correlated with transient solidification thermal variables. A combined theoretical and experimental approach was used to quantitatively determine such thermal variables, i.e., transient metal/mold heat-transfer coefficients, tip growth rates, thermal gradients, tip cooling rates, and local solidification time. The article also focuses on the dependence of dendrite arm spacings on the alloy solute content. Furthermore, the experimental data concerning the solidification of Al-1.0, 2.5, and 4.7 wt pct Ni alloys are compared with the main predictive dendritic models from the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. H. Jones: Mater. Sci. Eng., A, 2005, vols. 413–414, pp. 165–7310.1016/j.msea.2005.08.190 ↗
2. V. Mertinger, G. Szabo, P. Barczy, A. Kovacs, G. Czel: Mater. Sci. Forum, 1996, vols. 215–216, pp. 331–3810.4028/www.scientific.net/MSF.215-216.331 ↗
3. A. Juarez-Hernandez, H. Jones: Scripta Mater., 1998, vol. 38, pp. 729–3410.1016/S1359-6462(97)00542-3 ↗
4. Y.X. Zhuang, X.M. Zhang, L.H. Zhu, Z.Q. Hu: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 37–3910.1016/S1468-6996(01)00023-7 ↗
5. J.M.V. Quaresma, C.A. Santos, A. Garcia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3167–7710.1007/s11661-000-0096-0 ↗
6. W.R. Osório, A. Garcia: Mater. Sci. Eng., A, 2002, vol. 325, pp. 103–1110.1016/S0921-5093(01)01455-1 ↗
7. W.R. Osório, C.A. Santos, J.M.V. Quaresma, A. Garcia: J. Mater. Proc. Technol., 2003, vols. 143–144, pp. 703–0910.1016/S0924-0136(03)00355-8 ↗
8. W.R. Osório, P.R. Goulart, G.A. Santos, C. Moura Neto, A. Garcia: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2525–3810.1007/BF02586225 ↗
9. J.D. Hunt: Int. Conf. Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 3–9
10. W. Kurz, J.D. Fisher: Acta Metall., 1981, vol. 29, pp. 11–2010.1016/0001-6160(81)90082-1 ↗
11. W. Kurz, J.D. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1992, pp. 85–90
12. R. Trivedi: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 977–8210.1007/BF02644689 ↗
13. K. Somboonsuk, J.T. Mason, R. Trivedi: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 967–7510.1007/BF02644688 ↗
14. M. Gündüz, E. Çadirli: Mater. Sci. Eng., A, 2002, vol. 327, pp. 167–8510.1016/S0921-5093(01)01649-5 ↗
15. D. Bouchard, J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 651–6310.1007/s11663-997-0039-x ↗
16. J.D. Hunt, S.Z. Lu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 611–2310.1007/BF02648950 ↗
17. D. Bouchard, J.S. Kirkaldy: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 101–1310.1007/BF02915081 ↗
18. A. Mortesen: Metall. Trans. A, 1991, vol. 22A, pp. 569–7410.1007/BF02656824 ↗
19. M. Chen, T.Z. Kattamis: Mater. Sci. Eng., A, 1998, vol. 247, pp. 239–4710.1016/S0921-5093(97)00720-X ↗
20. O.L. Rocha, C.A. Siqueira, A. Garcia: Mater. Sci. Eng., A, 2003, vol. 361, pp. 111–1810.1016/S0921-5093(03)00518-5 ↗
21. O.L. Rocha, C.A. Siqueira, A. Garcia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 995–100610.1007/s11661-003-0229-3 ↗
22. M.D. Peres, C.A. Siqueira, A. Garcia: J. Alloys Compd., 2004, vol. 381, pp. 168–8110.1016/j.jallcom.2004.03.107 ↗
23. T. Okamoto, K. Kishitake: J. Cryst. Growth, 1975, vol. 29, pp. 137–4610.1016/0022-0248(75)90217-1 ↗
24. U. Feurer and R. Wunderlin, cited by W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Ltd., Aedermannsdorf, Switzerland, 1986, pp. 214–16
25. D.H. Kirkwood: Mater. Sci. Eng., A, 1985, vol. 73, pp. L1–L410.1016/0025-5416(85)90319-2 ↗
26. J.A.V. Butler: Proc. R. Soc. London, Ser. A, 1932, vol. 135, pp. 348–7510.1098/rspa.1932.0040 ↗
27. W. Gasior, J. Pstruś, Z. Moser, A. Krzyżak, K. Fitzner: J. Phase Equilib. Diff., 2002, vol. 24, pp. 40–4910.1361/105497103770330983 ↗
28. R. Picha, J. Vřešťál, A. Kroupa: Calphad, 2004, vol. 28, pp. 141–4610.1016/j.calphad.2004.06.002 ↗
29. T.P. Hoar, D.A. Melford: Trans. Faraday Soc., 1957, vol. 53, pp. 315–2610.1039/tf9575300315 ↗
30. T. Tanaka, T. Lida: Steel Res., 1994, vol. 65, pp. 21–2810.1002/srin.199400921 ↗
31. T. Tanaka, K. Hack, T. Lida, S. Hara: Z. Metallkd., 1996, vol. 87, pp. 380–89
32. T. Tanaka, K. Hack, S. Hara: MRS Bull., 1999, vol. 24, pp. 45–5010.1557/S0883769400052180 ↗
33. M. Gunduz, E. Çardili: Mater. Sci. Eng., A, 2002, vol. 327, pp. 167–8510.1016/S0921-5093(01)01649-5 ↗
34. C.A. Santos, J.M.V. Quaresma, A. Garcia: J. Alloys Compd., 2001, vol. 319, pp. 174–8610.1016/S0925-8388(01)00904-5 ↗
35. I.L. Ferreira, J.E. Spinelli, J.C. Pires, A. Garcia: Mater. Sci. Eng., A, 2005, vol. 408, pp. 317–2510.1016/j.msea.2005.08.145 ↗
36. F.P. Incropera, D.P. Dewit: Fundamentals of Heat and Mass Transfer, Wiley, New York, NY, 1990, pp. 56–62
37. V.L. Voller, C.R. Swaminathan: Numer. Heat Transfer Part B, 1991, vol. 19, pp. 175–8910.1080/10407799108944962 ↗
38. M.V. Canté, K.S. Cruz, J.E. Spinelli, N. Cheung, A. Garcia: Mater. Lett., 2007, vol. 61, pp. 2135–3810.1016/j.matlet.2006.08.032 ↗