journal article·2010-07

Microstructural Analysis of a Laser-Processed Zr-Based Bulk Metallic Glass

H. Sun, K.M. Flores

Publisher page

Abstract

Laser processing is a precision manufacturing technique capable of producing materials with highly nonequilibrium microstructures. Due to the localized heat input and high cooling rate inherent to the process, this technology is attractive for the production of metallic glasses. In the present work, we use a laser deposition process to deposit a Zr-based metallic glass forming powder on both amorphous and crystalline substrates of the same nominal composition. Amorphous melt zones are observed surrounded by distinct crystalline heat-affected zones (HAZs). Detailed examination of the HAZ in the glassy substrates reveals the formation of microscale spherulites, in contrast to the nanocrystalline phases observed following crystallization by isothermal annealing of the glass at the crystallization temperature as well as in the HAZ of the crystalline substrates. The spherulites have a different crystal morphology and structure from the nanocrystalline phases, indicating that the more stable nanocrystalline phases are completely bypassed when the glass is devitrified at the higher heating rate. Reducing the heat input during laser processing results in the near elimination of the crystalline HAZ in the amorphous substrates, suggesting that a critical heating rate range is required to avoid devitrification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R, 2004, vol. 44, pp. 45–89.10.1016/j.mser.2004.03.001 ↗
2. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
3. W.L. Johnson: JOM, 2002, vol. 54, pp. 40–43.10.1007/BF02822619 ↗
4. M.F. Ashby and A.L. Greer: Scripta Mater., 2006, vol. 54, pp. 321–26.10.1016/j.scriptamat.2005.09.051 ↗
5. F. Audebert, R. Colaco, R. Vilar, and H. Sirkin: Scripta Mater., 2003, vol. 48, pp. 281–86.10.1016/S1359-6462(02)00382-2 ↗
6. B. Li, Z.Y. Li, J.G. Xiong, L. Xing, D. Wang, and Y. Li: J. Alloys Compd., 2006, vol. 413, pp. 118–21.10.1016/j.jallcom.2005.07.005 ↗
7. X. Wu, B. Xu, and Y. Hong: Mater. Lett., 2002, vol. 56, pp. 838–41.10.1016/S0167-577X(02)00624-9 ↗
8. X. Wu and Y. Hong: Surf. Coat. Technol., 2001, vol. 141, pp. 141–44.10.1016/S0257-8972(01)01263-4 ↗
9. D. Carvalho, S. Cardoso, and R. Vilar: Scripta Mater., 1997, vol. 37, pp. 523–27.10.1016/S1359-6462(97)00127-9 ↗
10. Y. Wang, G. Li, C. Wang, Y. Xia, B. Sandip, and C. Dong: Surf. Coat. Technol., 2004, vol. 176, pp. 284–89.10.1016/S0257-8972(03)00771-0 ↗
11. T.M. Yue, Y.P. Su, and H.O. Yang: Mater. Lett., 2007, vol. 61, pp. 209–12.10.1016/j.matlet.2006.04.033 ↗
12. H. Sun and K.M. Flores: J. Mater. Res., 2008, vol. 23, pp. 2692–2703.10.1557/jmr.2008.0329 ↗
13. T.A.M. Aboki, F. Brisset, J.P. Souron, A. Dezellus, and P. Plaindoux: Intermetallics, 2008, vol. 16, pp. 615–24.10.1016/j.intermet.2008.01.014 ↗
14. L. Granasy, T. Pusztai, G. Tegze, J.A. Warren, and J.F. Douglas: Phys. Rev. E, 2005, vol. 72, pp. 011605-1–011605-15.10.1103/PhysRevE.72.011605 ↗
15. L. Wang, S. Felicelli, Y. Gooroochurn, P.T. Wang, and M.F. Horstemeyer: Mater. Sci. Eng. A, 2008, vol. 474, pp. 148–56.10.1016/j.msea.2007.04.119 ↗
16. C.C. Hays, J. Schroers, and W.L. Johnson: Appl. Phys. Lett., 2001, vol. 79, pp. 1605–07.10.1063/1.1398605 ↗
17. J. Schroers and W.L. Johnson: J. Appl. Phys., 2000, vol. 88, pp. 44–48.10.1063/1.373621 ↗
18. I. Gallino, M.B. Shah, and R. Busch: Acta Mater., 2007, vol. 55, pp. 1367–76.10.1016/j.actamat.2006.09.040 ↗
19. H. Sun and K.M. Flores: unpublished research, 2009, Dept. of Materials Science and Engineering, the Ohio State University, Columbus, OH.