journal article·2007-03

Mechanism and Microstructure of Oxide Fluxes for Gas Tungsten Arc Welding of Magnesium Alloy

L. M. Liu, Z. D. Zhang, G. Song, L. Wang

Publisher page

Abstract

Five single oxide fluxes—MgO, CaO, TiO2, MnO2, and Cr2O3—were used to investigate the effect of active flux on the depth/width ratio in AZ31B magnesium alloy. The microstructure and mechanical property of the tungsten inert gas (TIG) welding seam were studied. The oxygen content in the weld seam and the arc images during the TIG welding process were analyzed. A series of emission spectroscopy of weld arc for TIG welding for magnesium with and without flux were developed. The results showed that for the five single oxide fluxes, all can increase the weld penetration effectively and grain size in the weld seam of alternating current tungsten inert gas (ACTIG) welding of the Mg alloy. The oxygen content of the welds made without flux is not very different from those produced with oxide fluxes not considering trapped oxide. However, welds that have the best penetration have a relatively higher oxygen content among those produced with flux. It was found that the arc images with the oxide fluxes were only the enlarged form of the arc images without flux; the arc constriction was not observed. The detection of arc spectroscopy showed that the metal elements in the oxides exist as the neutral atom or the first cation in the weld arc. This finding would influence the arc properties. When TIG simulation was carried out on a plate with flux applied only on one side, the arc image video showed an asymmetric arc, which deviated toward the flux free side. The thermal stability, the dissociation energy, and the electrical conductivity of oxide should be considered when studying the mechanism for increased TIG flux weld penetration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Haferkamp H., Niemeyer M., Dilthey U., Trager G. (2000) Weld. Cutt. 52:178–80
2. Lehner C., Reinhart G., Schaller L. (1999) J. Laser Appl. 11:206–1010.2351/1.521865 ↗
3. Sanders P.G., Keske J.S., Leong K.H., Kornrcki G. (1999) J. Laser Appl. 11:96–10310.2351/1.521885 ↗
4. K.H. Leong, G. Kornecki, P.G. Sanders, and J.S. Keske: IVCALEO 98 on Laser Materials Processing Conf., FL, Nov. 16–19, Laser Institute of America, Orlando, 1998, pp. 28–36
5. Westengen H. (2000) Light Met. Age 58:44–52
6. H. Haferkamp, I. Burmester, M. Niemeyer, E. Doege, and K. Droder: Proc. 30th Int. Symp. Automotive Technology and Automation, Florence, Italy, June 16–19, 1997, ATT/ITS, ISATA, Croydon, UK, pp. 247–58
7. Busk R.S. (1987) Magnesium Products Design. Marcel Dekker Inc., New York, NY
8. Avedesian M.M., Baker H. (1999) Magnesium and Magnesium Alloys. ASM Specialty Handbook, ASM, Materials Park, OH
9. Lucas W., Howse D. (1996) Weld. Met. Fabr. 64:11–17
10. Paskell T., Lundin C., Castner H. (1997) Weld. J. 76:57–62
11. Tanka M., Shimizu T., Terasaki H., Ushio M., Koshi-ishi F., Yang C.-L. (2000) Sci. Technol. Weld. Joining 5:397–40210.1179/136217100101538461 ↗
12. Kuo M., Sun Z., Pan D. (2001) Sci. Technol. Weld. Joining 6:17–2210.1179/136217101101538497 ↗
13. Dinechin G., Chagont C., Castillan F., Blanchot O. and Baude D. (2002) Weld. Int. 16:750–2810.1080/09507110209549609 ↗
14. Gurevich S.M., Zamkov V.N., Kushmienko N.A. (1965) Avtomaticheskaya Svarka 9:1–4
15. Gurevich S.M., Zamkov V.N. (1973) Titanium Science and Technology. Plenum Press, New York, NY, pp. 541–55110.1007/978-1-4757-1346-6_40 ↗
16. Simonik A.G. (1974) Svar. Proiz 3:52–53
17. Paton B.E., Zamkov V.N., Prilutsky V.P., Poritsky P.V. (2000) Paton Weld. J. 1:5–11
18. Perry N., Marry S., Soutif E. (1999) Proc. 5th Int. Conf. on Trends in Welding Research, Pine Mountain, Georgia, USA, ASM International, Materials Park, OH, pp. 520–25
19. Richard H. (2003) Weld. Des. Fabric. 9:20–23
20. Rodrigues A., Loureiro A. (2005) Sci. Technol. Weld. Joining 10:760–6510.1179/174329305X68769 ↗
21. Lowke J.J., Tanake M., Ushio M. (2005) J. Phys. D: Appl. Phys. 38:3438–4510.1088/0022-3727/38/18/018 ↗
22. Howse D.S., Lucas W. (2000) Sci. Technol. Weld. Joining 5:189–9310.1179/136217100101538191 ↗
23. Lu S.P., Hidetoshi F., Hiroyuki S., Kiyoshi N. (2003) Metall. Mater. Trans. A 34A:1901–0710.1007/s11661-003-0155-4 ↗
24. Lu S.P., Hidetoshi F., Hiroyuki S., Manabu T., Kiyoshi N. (2002) Mater. Trans. 43:2926–3110.2320/matertrans.43.2926 ↗
25. Marya M., Edwards G.R. (2002) Weld. J. 81:291-s–298-s
26. Marya M. (2002) Weld. World 46:7–2110.1007/BF03263386 ↗
27. Zhang Z.D., Liu L.M., Shen Y., Wang L. (2005) Chin. J. Nonferrous Met. 15:912–16
28. Liu L.M., Zhang Z.D., Shen Y., Wang L. (2006) Acta Metall. Sinica 42:399–404
29. Liu L.M., Zhang Z.D., Song G., Shen Y., Wang L. (2006) Mater. Trans. 47:446–4910.2320/matertrans.47.446 ↗
30. Zhang Z.D., Liu L.M., Shen Y., Wang L. (2005) Sci. Technol. Weld. Joining 10:737–4310.1179/174329305X70702 ↗
31. Heiple C.R., Roper J.R. (1982) Weld. J. 61:97-s–102-s