journal article·2013-05Open access

Kinetics of Z-Phase Precipitation in 9 to 12 pct Cr Steels

Hilmar K. Danielsen, Paolo Emilio di Nunzio, John Hald

Abstract

The Z-phase nitride is seen as a detrimental phase in 9 to 12 pct Cr steels as it is in competition with the beneficial MX particles. Two model steels, with 9 pct Cr and 12 pct Cr content, respectively, were designed to study the effect of Cr on Z-phase precipitation kinetics. The steels were isothermally aged at 873 K, 923 K, and 973 K (600 °C, 650 °C, and 700 °C) for up to 30,000 hours in order for Z-phase to replace MX. X-ray diffraction (XRD) analysis of extracted precipitates was used to quantitatively follow the evolution of the nitrides population. It was found that the 12 pct Cr steel precipitated Z-phase 20 to 50 times faster than the 9 pct Cr steel. Transmission electron microscopy (TEM) was applied to follow the Z-phase precipitation, using energy-dispersive X-ray spectroscopy (EDS) line scans and atomic resolution imaging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. E. Schnabel, P. Shcwaab, and H. Weber: Stahl und Eisen, 1987, vol. 197, pp. 691–96.
2. A. Strang and V. Vodarek: Mater. Sci. Technol., 1996, vol. 12, pp. 552–56.10.1179/026708396790165993 ↗
3. H.K. Danielsen and J. Hald: Energy Mater., 2006, vol. 1, pp. 49–57.10.1179/174892306X99732 ↗
4. H.K. Danielsen and J. Hald: CALPHAD, 2007, vol. 31, pp. 505–14.10.1016/j.calphad.2007.04.001 ↗
5. H.K. Danielsen and J. Hald: Mater. Sci. Eng. A, 2009, vol. 505, pp. 169–77.10.1016/j.msea.2008.11.019 ↗
6. K. Sawada, H. Kushima, M. Tabuchi, and K. Kimura: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5511–18.10.1016/j.msea.2011.03.073 ↗
7. P.E. di Nunzio, L. Cipolla, S. Tiberi Vipraio, S. Martelli, and M.A.J. Somers: Mater. Sci. Technol., 2010, vol. 26, pp. 1423–28.10.1179/026708309X12567268926687 ↗
8. L. Cipolla, H.K. Danielsen, D. Venditti, P.E. di Nunzio, J. Hald, and M.A.J. Somers: Acta Mater., 2010, vol. 50, pp. 669–79.10.1016/j.actamat.2009.09.045 ↗
9. H.K. Danielsen, J. Hald, and M.A.J. Somers: Scripta Metall., 2012, vol. 66, pp. 261–64.10.1016/j.scriptamat.2011.11.005 ↗
10. H.K. Danielsen, J. Hald, F.B. Grumsen, and M.A.J. Somers: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2633–40.10.1007/BF02586098 ↗
11. T.J. Prior and P.D. Battle: J. Solid State Chem., 2003, vol. 172, pp. 138–47.10.1016/S0022-4596(02)00171-8 ↗
12. M. Kikuchi, T. Sekita, S. Wakita, and R. Tanaka: ISIJ, 1981, vol. 67, pp. 1981–89.
13. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17, pp. 1–14.10.1179/026708301101508972 ↗
14. K. Sawada, H. Kushima, K. Kimura, and M. Tabuchi: ISIJ Int., 2007, vol. 47, pp. 733–39.10.2355/isijinternational.47.733 ↗
15. L. Helis, Y. Toda, T. Hara, H. Miyazaki, and F. Abe: 34th MPA Seminar, Stuttgart, Germany, 2008, pp. 9.1–9.20.
16. F. Kauffmann, G. Zies, K. Maile, S. Straub, and K.H. Mayer: 34th MPA Seminar, Stuttgart, Germany, 2008, pp. 4.1–4.14.
17. V. Vodarek and A. Strang: Materials for Advanced Power Engineering, Forschnungszentrum Jülich GmbH, Jülich, Germany, 2002, pp. 1223–32.