Fractography of Stress Corrosion Cracking of Mg-Al Alloys
Source abstract
Abstract
Mechanisms for the stress corrosion cracking (SCC) of Mg-Al alloys have been investigated by scanning electron microscopy (SEM) of the fracture surfaces, for the two-phase alloy AZ91 and the single-phase alloys AZ31 and AM30 in distilled water. The mechanism for crack initiation in AZ31 and AM30 involves localized dissolution. The mechanisms for crack propagation in AZ31 and AM30 involve microvoid coalescence and cleavage, respectively. The mechanism for crack initiation in AZ91 is unclear, but may involve the fracture of β particles near the surface. The mechanism for crack propagation at moderate strain rates in AZ91 is similar to that in AZ31, with β particles acting as sources of H for mobile dislocations. The fracture surface for AZ91 tested at the strain rate 3 × 10−8 s−1 was similar to that for specimens precharged in gaseous H2. This fracture surface is the result of (1) the nucleation and growth of MgH2 particles, (2) sudden fracture through the MgH2 particles at some critical stress, and (3) decomposition of the MgH2 particles after fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. N. Winzer, A. Atrens, G. Song, E. Ghali, W. Dietzel, K.U. Kainer, N. Hort, C. Blawert: Adv. Eng. Mater., 2005, vol. 8, pp. 659–9310.1002/adem.200500071 ↗
2. S.P. Lynch, P. Trevena: Corrosion, 1988, vol. 44, pp. 113–2410.5006/1.3583907 ↗
3. E.I. Meletis, R.F. Hochman: Corrosion, 1984, vol. 40, pp. 39–4510.5006/1.3579294 ↗
4. D.G. Chakrapani, E.N. Pugh: Metall. Trans. A, 1976, vol. 7A, pp. 173–7810.1007/BF02644454 ↗
5. A.J. Bursle, E.N. Pugh: in Mechanisms of Environment Sensitive Cracking of Materials, P.R. Swann, F.P. Ford, and A.R.C. Westwood, eds., Materials Society, London, 1977, pp. 471–81
6. G.L. Makar, J. Kruger, K. Sieradzki: Corros. Sci., 1993, vol. 34, pp. 1311–4210.1016/0010-938X(93)90090-4 ↗
7. H.K. Birnbaum: in Hydrogen Effects on Material Behavior, N.R. Moody, A.W. Thompson, eds., TMS, Warrendale, PA, 1990, pp. 639–60
8. S.P. Lynch: in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R.E. Ricker, G.W. Was, R.H. Jones, eds., TMS, Warrendale, PA, 2003, pp. 449–66
9. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, B. Karihaloo, eds., Elsevier, Oxford, United Kingdom, 2003, pp. 31–10110.1016/B0-08-043749-4/06134-6 ↗
10. N. Winzer, A. Atrens, W. Dietzel, V.S. Raja, G. Song, and K.U. Kainer: Mater. Sci. Eng. A, doi: 10.1016/j.msea.2007.11.06410.1016/j.msea.2007.11.064 ↗
11. C.E. Coleman: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B. Karihaloo, eds., Elsevier, Oxford, United Kingdom, 2003, pp. 103–6110.1016/B0-08-043749-4/06104-8 ↗
12. B. Cox: Proc. Metallography and Corrosion Symp., IMS Annual Conf., Calgary, 1986, NACE International, Houston, TX, 1986, pp. 153–74
13. B. Cox: J. Nucl. Mater., 1990, vol. 170, pp. 1–2310.1016/0022-3115(90)90321-D ↗
14. K. Nuttall, A.J. Rogowski: J. Nucl. Mater., 1979, vol. 80, pp. 279–9010.1016/0022-3115(79)90191-0 ↗
15. G.K. Shek, M.T. Jovanovic, H. Seahra, Y. Ma, D. Li, R.L. Eadie: J. Nucl. Mater., 1996, vol. 231, pp. 221–3010.1016/0022-3115(96)00370-4 ↗
16. L.A. Simpson: Mech. Behav. Mater., 1979, vol. 2, pp. 445–55
17. S.Q. Shi, M.P. Puls: J. Nucl. Mater., 1994, vol. 208, pp. 232–4210.1016/0022-3115(94)90332-8 ↗
18. S.Q. Shi, M.P. Puls, S. Sagat: J. Nucl. Mater., 1994, vol. 208, pp. 243–5010.1016/0022-3115(94)90333-6 ↗
19. R. Dutton, K. Nuttall, M.P. Puls, L.A. Simpson: Metall. Trans. A, 1977, vol. 8A, pp. 1553–6210.1007/BF02644858 ↗
20. H.P. Van Leeuwen: Eng. Fract. Mech., 1974, vol. 6, pp. 141–6110.1016/0013-7944(74)90053-8 ↗
21. N. Winzer, A. Atrens, W. Dietzel, G. Song, K.U. Kainer: Mater. Sci. Eng., A, 2007, vol. 466, pp. 18–3110.1016/j.msea.2007.03.020 ↗
22. S.P. Lynch: Acta Metall., 1988, vol. 34, pp. 2639–6110.1016/0001-6160(88)90113-7 ↗
23. A. Atrens, C.C. Brosnan, S. Ramamurthy, A. Oehlert, I.O. Smith: Meas. Sci. Technol., 1993, vol. 4, pp. 1281–9210.1088/0957-0233/4/11/017 ↗
24. W. Dietzel, K.H. Schwalbe: Z. Materialprüfung, 1986, vol. 28, pp. 368–72
25. A. Oehlert, A. Atrens: J. Mater. Sci., 1998, vol. 33, pp. 775–8110.1023/A:1004362400904 ↗
26. A. Oehlert, A. Atrens: J. Mater. Sci., 1997, vol. 32, pp. 6519–2310.1023/A:1018659226945 ↗
27. A. Oehlert, A. Atrens: Corros. Sci., 1996, vol. 38, pp. 1159–7010.1016/0010-938X(96)00010-8 ↗
28. A. Oehlert, A. Atrens: Acta Metall. Mater., 1994, vol. 42, pp. 1493–150810.1016/0956-7151(94)90360-3 ↗
29. N. Winzer, A. Atrens, W. Dietzel, G. Song, and K.U. Kainer: Mater. Sci. Eng., A, 2007, doi:10.1016/j.msea.2007.03.021, article in press10.1016/j.msea.2007.03.021 ↗
30. N. Winzer, A. Atrens, W. Dietzel, G. Song, and K.U. Kainer: unpublished research
31. C. Nishimura, M. Komaki, M. Amano: J. Alloys Compd., 1999, vols. 293–295, pp. 329–3310.1016/S0925-8388(99)00373-4 ↗
32. V.I. Shapovalov, A.P. Semik, and A.G. Timchenko: Russ. Metall., 1993, vol. 3, pp. 21–24
33. V.I. Shapovalov, N.P. Serdyuk, and A.P. Semik: Dopov. Akad. Nauk Ukr. RSR, Ser. A: Fiz.-Mat. Tekh. Nauki, 1981, vol. 6, pp. 99–101
34. J. Koeneman, A.G. Metcalfe: Trans. ASM, 1959, vol. 51, pp. 1072–82
35. Y.C. Huang, T. Watanabe, R. Komatsu: in Proc. 4th Int. Conf. Vacuum Metallurgy, T. Saito, ed., ISIJ (Tokyo) and JIM (Sendai), Japan, 1973, pp. 176–79
36. Z.D. Popovic, G.R. Piercy: Metall. Trans. A, 1975, vol. 6A, pp. 1915–1710.1007/BF02646856 ↗
37. T. Watanabe, Y.C. Huang, R. Komatsu: J. Jpn. Inst. Light Met., 1975, vol. 26, pp. 76–8110.2464/jilm.26.76 ↗
38. K. Zeng, T. Klassen, W. Oelerich, R. Bormann: Int. J. Hydrogen Energy, 1999, vol. 24, pp. 989–100410.1016/S0360-3199(98)00132-3 ↗
39. S.Q. Shi: J. Nucl. Mater., 1999, vol. 275, pp. 318–2310.1016/S0022-3115(99)00122-1 ↗
40. N. Winzer, A. Atrens, W. Dietzel, G. Song, K.U. Kainer: Mater. Sci. Eng., A, 2007, vol. 466, pp. 18–3110.1016/j.msea.2007.03.020 ↗
41. M.P. Puls: Acta Metall. Mater., 1981, vol. 29, pp. 1961–6810.1016/0001-6160(81)90033-X ↗
42. J. Lufrano, P. Sofronis, H.K. Birnbaum: J. Mech. Phys. Solids, 1996, vol. 44, pp. 179–20510.1016/0022-5096(95)00075-5 ↗
43. A.G. Varias, A.R. Massih: J. Mech. Phys. Solids, 2002, vol. 50, pp. 1469–151010.1016/S0022-5096(01)00117-X ↗
44. F.H. Ellinger, C.E. Holley Jr., B.B. McInteer, D. Pavone, R.M. Potter, E. Staritzky, W.H. Zachariasen: J. Am. Chem. Soc., 1955, vol. 77, pp. 2647–4810.1021/ja01614a094 ↗
45. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., CRC, Boca Raton, FL, 2004
46. R.S. Stampella, R.P.M. Proctor, V. Ashworth: Corros. Sci., 1984, vol. 24, pp. 325–4110.1016/0010-938X(84)90017-9 ↗
47. D.G. Chakrapani, E.N. Pugh: Corrosion, 1975, vol. 31, pp. 247–5210.5006/0010-9312-31.7.247 ↗
48. W.R. Wearmouth, G.P. Dean, R.N. Parkins: Corrosion, 1973, vol. 29, pp. 251–5810.5006/0010-9312-29.6.251 ↗
49. A. Krozer, B. Kasemo: J. Less-Common Met., 1990, vol. 160, pp. 323–4210.1016/0022-5088(90)90391-V ↗
50. A. Krozer, B. Kasemo: J. Phys.: Condens. Matter, 1989, vol. 1, pp. 1533–3810.1088/0953-8984/1/8/017 ↗
51. V.P. Zhdanov, A. Krozer, B. Kasemo: Phys. Rev. B, 1993, vol. 47, pp. 11044–1104810.1103/PhysRevB.47.11044 ↗
52. P. Hjort, A. Krozer, B. Kasemo: J. Alloys Compd., 1996, vol. 237, pp. 74–8010.1016/0925-8388(95)02165-5 ↗
53. P. Hjort, A. Krozer, B. Kasemo: J. Alloys Compd., 1996, vol. 234, pp. L11–L1510.1016/0925-8388(95)02153-1 ↗