journal article·2004-03

Determination of volume fractions of texture components with standard distributions in Euler space

Jae-Hyung Cho, A. D. Rollett, K. H. Oh

Publisher page

Abstract

The intensities of texture components are modeled by Gaussian distribution functions in Euler space. The multiplicities depend on the relation between the texture component and the crystal and sample symmetry elements. Higher multiplicities are associated with higher maximum values in the orientation distribution function (ODF). The ODF generated by Gaussian function shows that the S component has a multiplicity of 1, the brass and copper components, 2, and the Goss and cube components, 4 in the cubic crystal and orthorhombic sample symmetry. Typical texture components were modeled using standard distributions in Euler space to calculate a discrete ODF, and their volume fractions were collected and verified against the volume used to generate the ODF. The volume fraction of a texture component that has a standard spherical distribution can be collected using the misorientation approach. The misorientation approach means integrating the volume-weighted intensity that is located within a specified cut-off misorientation angle from the ideal orientation. The volume fraction of a sharply peaked texture component can be collected exactly with a small cut-off value, but textures with broad distributions (large full-width at half-maximum (FWHM)) need a larger cut-off value. Larger cut-off values require Euler space to be partitioned between texture components in order to avoid overlapping regions. The misorientation approach can be used for texture`s volume in Euler space in a general manner. Fiber texture is also modeled with Gaussian distribution, and it is produced by rotation of a crystal located at g 0, around a sample axis. The volume of fiber texture in wire drawing or extrusion also can be calculated easily in the unit triangle with the angle distance approach.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Mineral Processing and Grinding · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. H.J. Bunge: Texture Analysis in Materials Science, Butterworth and Co., London, 1982.
2. H.J. Bunge and C. Esling, (Hrsg.): Quantitative Texture analysis, DGM Informationsgesellschaft, Oberursel, 1982.
3. H.R. Wenk: Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis, Academic Press, San Diego, CA, 1985.
4. S. Matthies and G.W. Vinel: Phys. Status Solidi, 1982, (b) 112, pp. K111-K114.10.1002/pssb.2221120254 ↗
5. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge, University Press, Cambridge, United Kingdom, 1998.
6. H.J. Bunge. Mathematische Methoden der Texturanalyse, Akademie-Verlag, Berlin, 1969.
7. S. Matthies, G.W. Vinel, and K. Helming: Standard Distributions in Texture Analysis, Akademie-Verlag, Berlin, 1987.10.1515/9783112736173 ↗
8. S. Matthies: Phys. Status Solidi, 1980, (b) 101, pp. K111-K115.10.1002/pssb.2221010247 ↗
9. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36 (11), pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
10. K. Lücke, J. Pospiech, J. Jura, and J. Hirsch: Z. Metallkd., 1986, vol. 77, pp. 312–21.
11. V. Randle and O. Engler: Introduction to texture analysis: macrotexture, microtexture and orientation mapping, Gordon & Breach Science Publishers, Amsterdam, 2000.10.1201/9781482287479 ↗
12. V. Randle: The Measurement of Grain Boundary Geometry, Institute of Physics Publishing, UK, 1993, chs. 2–3.
13. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229–40.10.1093/biomet/45.1-2.229 ↗
14. D.C. Handscomb: Can. J. Math., 1958, vol. 10, pp. 85–88.10.4153/CJM-1958-010-0 ↗
15. A. Morawiec: Acta Cryst., 1997, vol. A53, pp. 273–85.10.1107/S0108767396015115 ↗
16. K. Rajan and R. Petkie: Mater. Sci. Eng., 1998, vol. A257, pp. 185–197.10.1016/S0921-5093(98)00838-7 ↗
17. N.R. Barton and R.R. Dawson: Metall. Trans. A, 2001, vol. 32A, pp. 1967–75.10.1007/s11661-001-0009-x ↗
18. C. Niels, L. Krieger, and D.J. Jensen: Acta Cryst., 1994, vol. A50, pp. 741–48.
19. K. Kunze, S.L. Wright, B.L. Adams, and D.J. Dingley: Textures Microstr., 1993, 20 (1–4), pp. 41–54.10.1155/TSM.20.41 ↗
20. A. Morawiec: J. Appl. Cryst., 1990, vol. 23, pp. 374–77.10.1107/S002188989000512X ↗
21. A. Kumar and P.R. Dawson: Computational Mechanics, 1995, vol. 17, pp. 10–25.10.1007/BF00356475 ↗
22. J.S. Kallend, U.F. Kocks, A.D. Rollett, and H.-R. Wenk: Mater. Sci. Eng., 1991, vol. A132, pp. 1–11.10.1016/0921-5093(91)90355-Q ↗
23. M. Abramowitz and I.A. Stegun: Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, National Bureau of Standards, US Government Printing Office, Washington, DC, 1964.
24. G.N. Watson: A Treatise on the Theory of Bessel Functions, University Press, Cambridge, United Kingdom, 1945.
25. S. Matthies: Phys. Status Solidi, 1982, (b) 112, pp. 705–16.10.1002/pssb.2221120242 ↗
26. F.C. Frank: Proc. ICOTOM 8 TMS, Warrendale, PA, 1988, pp. 3–13.
27. A. Heinz and P. Neumann: Acta Cryst., 1991, vol. A47, pp. 780–89.10.1107/S0108767391006864 ↗
28. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 181–91.