Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures
Source abstract
Abstract
The response of 316 stainless steel has been examined under uniaxial tensile loading during a range of tests carried out between 20 °C and 650 °C. In-situ neutron diffraction was used to measure internal elastic strain in subsets of differently oriented crystallites within the polycrystal aggregate. This allowed the determination of diffraction elastic constants. Further, results have been compared with predictions from a slip-based elasto-plastic self-consistent model. Good agreement is obtained during both conventional slip and when dynamic strain aging (DSA) is evidenced. The quality of agreement was reduced in the higher temperature regime, where it is expected that other mechanisms become active.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. P.J. Bouchard, D. George, J.R. Santisteban, G. Bruno, M. Dutta, L. Edwards, E. Kingston, and D.J. Smith: Int. J. Pressure Ves. Piping, 2005, vol. 82 (4), pp. 299–310.10.1016/j.ijpvp.2004.08.008 ↗
2. I.C. Noyan and J.B. Cohen: in Residual Stress—Measurement by Diffraction and Interpretation, Materials Research and Engineering, B. Ilschner and N.J. Grant, eds., Springer-Verlag, New York, NY, 1987, pp. 117–62.
3. Analysis of Residual Stress by Diffraction Using Neutron and Synchrotron Diffraction, M.E. Fitzpatrick and A. Lodini, eds., Taylor and Francis, London, 2003, pp. 60–77, 133–89.
4. J.W. Elmer, J. Wong, and T. Ressler: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1175–87.10.1007/s11661-001-0127-5 ↗
5. M.R. Daymond and H.G. Priesmeyer: Acta Mater., 2002, vol. 50 (6), pp. 1613–26.10.1016/S1359-6454(02)00026-5 ↗
6. S.R. MacEwen, J. Faber, and A.P.L. Turner: Acta Metall., 1983, vol. 31 (5), pp. 657–76.10.1016/0001-6160(83)90082-2 ↗
7. M.R. Daymond, M.A.M. Bourke, R.B. Von Dreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82 (4), pp. 1554–62.10.1063/1.365956 ↗
8. M.R. Daymond: J. Appl. Phys., 2004, vol. 96 (8), pp. 4263–72.10.1063/1.1794896 ↗
9. P.R. Dawson, A. Needleman, and S. Suresh: Mater. Sci. Eng., 1994, vol. A175, pp. 43–48.10.1016/0921-5093(94)91043-X ↗
10. P.A. Turner, N. Christodoulou, and C.N. Tomé: Int. J. Plast., 1995, vol. 11 (3), pp. 251–65.10.1016/0749-6419(94)00048-4 ↗
11. C.G. Windsor: Pulsed Neutron Scattering, Taylor and Francis, London, 1981, pp. 237–40.
12. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
13. A.C. Larson and R.B. Von Dreele: LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, 1994.
14. R.B. Von Dreele, J.D. Jorgensen, and C.G. Windsor: J. Appl. Crystallogr., 1982, vol. 15, pp. 581–89.10.1107/S0021889882012722 ↗
15. M.W. Johnson and M.R. Daymond: J. Appl. Crystallogr., 2002, vol. 35 (1), pp. 49–57.10.1107/S002188980101891X ↗
16. M.R. Daymond and P.J. Withers: Scripta Metall, 1996, vol. 35 (6), pp. 717–20.10.1016/1359-6462(96)00217-5 ↗
17. R. Hill: J. Mech. Phys. Sol., 1965, vol. 13, pp. 89–101.10.1016/0022-5096(65)90023-2 ↗
18. J.W. Hutchinson: Proc. R. Soc. London A, 1970, vol. 319, pp. 247–72.10.1098/rspa.1970.0177 ↗
19. J.D. Eshelby: Proc. R. Soc., 1959, vol. A252, pp. 561–69.
20. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998, p. 349.
21. U.F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48, pp. 171–73.10.1016/S0079-6425(02)00003-8 ↗
22. B. Clausen, T. Lorentzen, M.A.M. Bourke, and M.R. Daymond: Mater. Sci. Eng., 1999, vol. 259 (1), pp. 17–24.10.1016/S0921-5093(98)00878-8 ↗
23. M.R. Daymond and N.W. Bonner: Mater. Sci. Eng. A, 2002, vol. 340, pp. 263–71.
24. M.R. Daymond, C. Hartig, and H. Mecking: Acta Mater., 2005, vol. 53 (9), pp. 2805–13.10.1016/j.actamat.2005.02.041 ↗
25. M.R. Daymond and M.E. Fitzpatrick: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1977–86.10.1007/s11661-006-0140-9 ↗
26. E.C. Oliver, M.R. Daymond, and P.J. Withers: Acta Mater., 2004, vol. 52 (7), pp. 1937–51.10.1016/j.actamat.2003.12.035 ↗
27. T. Lorentzen, M.R. Daymond, B. Clausen, and C.N. Tomé: Acta Mater., 2002, vol. 50 (6), pp. 1627–38.10.1016/S1359-6454(02)00029-0 ↗
28. Y. Sakumoto, T. Nakazato, and A. Matsuzaki: J. Struct. Eng., 1996, vol. 122 (4), pp. 399–406.10.1061/(ASCE)0733-9445(1996)122:4(399) ↗
29. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1986, p. 59.
30. T. Gnaeupel-Herold, P.C. Brand, and H.J. Prask: J. Appl. Crystallogr., 1998, vol. 31, pp. 929–35.10.1107/S002188989800898X ↗
31. A. Teklu, H. Ledbetter, S. Kim, L.A. Boatner, M. McGuire, and V. Keppens: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3149–54.10.1007/s11661-004-0059-y ↗
32. J.G. Morris: Mater. Sci. Eng. A, 1971, vol. 7 (5), pp. 296–301.10.1016/0025-5416(71)90069-3 ↗
33. B. Clausen and M.A.M. Bourke: Metall. Trans. A, 2001, vol. 32A, pp. 691–94.10.1007/s11661-001-0085-y ↗
34. M.R. Daymond and E.C. Oliver: J. Neutron Res., 2004, vol. 12, pp. 213–17.10.1080/10238160410001734702 ↗
35. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1983, pp. 60–70.
36. M.R. Daymond, C.N. Tomé, and M.A.M. Bourke: Acta Mater., 2000, vol. 48, pp. 553–64.10.1016/S1359-6454(99)00354-7 ↗