journal article·2014-03

Phase Equilibria, Microstructure, and High-Temperature Strength of TiC-Added Mo-Si-B Alloys

Shimpei Miyamoto, Kyosuke Yoshimi, Seong-Ho Ha, Takahiro Kaneko, Junya Nakamura, Tetsuya Sato, Kouichi Maruyama, Rong Tu, Takashi Goto

Publisher page

Abstract

TiC was added to Mo-Si-B alloys using a conventional Ar arc-melting technique, and the phase equilibria, microstructure evolution, and high-temperature strength at 1673 K (1400 °C) were investigated. The primary phase changed to Mo solid solution (Moss), Mo5SiB2 (T2), or TiC depending on the composition. Following the primary phase solidification, a Moss + TiC, Moss + T2, or Moss + T2 + TiC + Mo2C eutectic reaction took place as the secondary solidification step. In some alloys, Moss + T2 + TiC and Moss + T2 + Mo2C eutectic reactions were present as higher-order solidification steps. After annealing at 2073 K (1800 °C) for 24 hours, Moss, T2, TiC, and Mo2C coexisted stably with microstructural coarsening. The coarsening rate was much faster in an alloy with no TiC dispersion, suggesting that TiC has a strong pinning effect on the grain boundary and interface migration. Compression tests conducted at 1673 K (1400 °C) revealed strength properties of almost all the alloys that were better than those of the Mo-Hf-C alloy (MHC). Alloy densities were 9 g/cm3 or less, which is lighter than pure Mo and MHC (≥10 g/cm3) and competitive with Ni-base superalloys. TiC-added Mo-Si-B alloys are promising candidates for ultrahigh-temperature materials beyond Ni-base superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. D.M. Dimiduk and J.H. Perepezko: MRS Bulletin, 2003, vol. 28, pp. 639–45.10.1557/mrs2003.191 ↗
2. R. Mitra: Int. Mater. Rev., 2006, vol. 51, pp. 13–64.10.1179/174328006X79454 ↗
3. M. Heilmaier, M. Krüger, H. Saage, J. Rösler, D. Mukherji, U. Glatzel, R. Völkl, R. Hüttner, G. Eggeler, Ch. Somsen, T. Depka, H.-J. Christ, B. Gorr, and S. Burk: JOM, 2009, vol. 61, pp. 61–7.
4. C.A. Nunes, R. Sakidja and J.H. Perepezko: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, TMS, Warrendale, PA, 1997, pp. 831–39.
5. Y. Yang and Y.A. Chang: Intermetallics, 2005, vol. 13, pp. 121–8.10.1016/j.intermet.2004.06.007 ↗
6. J.H. Schneibel, C.T. Liu, D.S. Easton, and C.A. Carmichael: Mater. Sci. Eng. A, 1999, vol. 261, pp.78–83.10.1016/S0921-5093(98)01051-X ↗
7. J.H. Schneibel, M.J. Kramer, and D.S. Easton: Scripta Mater., 2002, vol. 46, pp.217–21.10.1016/S1359-6462(01)01227-1 ↗
8. K. Yoshimi, S. Nakatani, N. Nomura, and S. Hanada: Intermetallics, 2003, vol. 11, pp.787–94.10.1016/S0966-9795(03)00073-6 ↗
9. K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp.591–602.10.1016/S0966-9795(01)00049-8 ↗
10. K. Ito, M. Kumagai, T. Hayashi, and M. Yamaguchi: Scripta Mater., 2003, vol. 49, pp.285–90.10.1016/S1359-6462(03)00289-6 ↗
11. A.P. Alur, N. Chollacoop, and K.S. Kumar: Acta Mater., 2004, vol. 52, pp.5571–87.10.1016/j.actamat.2004.08.035 ↗
12. P. Jain and K.S. Kumar: Acta Mater., 2010, vol. 58, pp.2124–42.10.1016/j.actamat.2009.11.054 ↗
13. K. Yoshimi, S. Nakatani, T. Suda, S. Hanada, and H. Habazaki: Intermetallics, 2002, vol. 10, pp.407–14.10.1016/S0966-9795(02)00013-4 ↗
14. F.A. Rioult, S.D. Imhoff, R. Sakidja, and J.H. Perepezko: Acta Mater., 2009, vol. 57, pp.4600–13.10.1016/j.actamat.2009.06.036 ↗
15. J.J. Kruzic, J.H. Schneibel, and R.O. Ritchie: Metall. Mater. Trans. A, 2005, vol. 36A, pp.2393–402.10.1007/s11661-005-0112-5 ↗
16. A. Sato, A.-C. Yeh, T. Kobayashi, T. Yokokawa, H. Harada, T. Murakumo, and J.X. Zhang: Energy Mater., 2007, vol. 2, pp.19–25.10.1179/174892407X205254 ↗
17. R.A. Lula: Heat-Resistant Materials, ASM International, Materials Park, OH, 1997, pp. 361–82.
18. V.N. Eremenko and T.Ya. Velikanova: Handbook of Ternary Alloy Phase Diagrams, vol. 6, ASM International, Metals Park, OH, 1995, pp. 7092.
19. H. Kurishita, Reiji Matsubara, J. SHiraishi, and H. Yoshinaga: Mater. Trans. JIM, 1986, vol. 27, pp.858–69.10.2320/matertrans1960.27.858 ↗
20. W.M. Haynes: Handbook of Chemistry and Physics, 93rd ed., CRC Press, Boca Raton, FL, 2012, pp. 4–96.
21. Y. Yang, Y.A. Chang, L. Tan, and W. Cao: Acta Mater., 2005, vol. 53, pp.1711–20.10.1016/j.actamat.2004.12.020 ↗
22. R. Sakidja and J.H. Perepezko: Metall. Mater. Trans. A, 2005, vol. 36A, 507–14.10.1007/s11661-005-0164-6 ↗
23. R. Sakidja and J.H. Perepezko: J. Nucl. Mater., 2007, vol. 366, pp.407–16.10.1016/j.jnucmat.2007.03.029 ↗