Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld
Source abstract
Abstract
The objective of this work was to characterize the Al x Cu y intermetallic compounds (IMCs) formed at the abutting interface during solid-state friction-stir welding (FSW) of 6082 aluminum alloy and pure copper. As IMCs are potential sources of flaws in case of mechanical loading of welds, their study is essential at various scale lengths. In the present case, they have been identified by neutron diffraction, electron backscattered diffraction, and transmission electron microscopy. Neutron diffraction analyses have shown that a shift of the tool from the interface, in particular towards the Cu part, generates an increase of the IMCs’ volume fraction. In accordance with an exacerbation of its kinetics of formation by FSW, a 4-μm-thick layer has precipitated at the interface despite the shortness of the thermal cycle. This layer is composed of two sublayers with the Al4Cu9 and Al2Cu stoichiometry, respectively. Convergent beam electron diffraction analyses have, however, disclosed that the crystallography of the current Al2Cu compound does not comply with the usual tetragonal symmetry of this phase. The Al2Cu phase formation results from both the local chemical composition and thermodynamics, whereas the development of Al4Cu9 is rather due to both the local chemical composition and the shortness of the local FSW thermal cycle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, and P.J. Withers: Int. Mater. Rev., 2009, vol. 54, pp. 49–93.10.1179/174328009X411136 ↗
2. M. Ericsson and R. Sandström: Int. J. Fatigue, 2003, vol. 25, pp. 1379–87.10.1016/S0142-1123(03)00059-8 ↗
3. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
4. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Progr. Mater. Sci., 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
5. P. Xue, B.L. Xiao, D.R. Ni, and Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5723–27.10.1016/j.msea.2010.05.061 ↗
6. T. Laurida, V. Vuorinen, and J.K. Kivilahti: Mater. Sci. Eng. R, 2005, vol. 49, pp. 1–60.10.1016/j.mser.2005.03.001 ↗
7. M. Braunovic and M. Alexandrov: IEEE Trans. Compon. Packag. Manufact. Technol., Part A, 1997, vol. 17, pp. 78–85.10.1109/95.296372 ↗
8. H.J. Park, S. Rhee, M.J. Kang, and D.C. Kim: Mater. T. JIM, 2009, vol. 50, pp. 2314–17.10.2320/matertrans.M2009105 ↗
9. M. Abbasi, A.K. Taheri, and M.T. Salehi: J. Alloy. Compd., 2001, vol. 319, pp. 233–41.10.1016/S0925-8388(01)00872-6 ↗
10. Y.J. Su, X-H. Liu, H-Y. Huang, X-F. Liu, and H-X. Xie: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 4088–99.10.1007/s11661-011-0785-x ↗
11. C-Y. Chen, H-L. Chen, and W-S. Hwang: Mater. Trans. JIM, 2006, vol. 47, pp. 1232–39.10.2320/matertrans.47.1232 ↗
12. M. Aonuma and K. Nakata: Mater. Sci. Eng. B, 2010, vol. 173, pp. 135–38.10.1016/j.mseb.2009.12.015 ↗
13. A. Hirose, H. Imaeda, M. Kondo, and K.F. Kobayashi: Mater. Sci. Forum, 2007, vols. 539–543, pp. 3888–93.10.4028/www.scientific.net/MSF.539-543.3888 ↗
14. T. Tanaka, T. Morishige, and T. Hirata: Scripta Mater., 2009, vol. 61, pp. 756–59.10.1016/j.scriptamat.2009.06.022 ↗
15. M. Aonuma and K. Nakata: Mater. Sci. Eng. B, 2010, vol. 173, pp. 135–38.10.1016/j.mseb.2009.12.015 ↗
16. K. Savolainen, J. Mononen, T. Saukkonen, and H. Hänninen: Proc. Int. Symp. FSW, 2006, Paper 79.
17. K. Ueda, T. Ogura, S. Nishiuchi, K. Miyamoto, T. Nanbu, and A. Hirose: Mater. T. JIM, 2011, vol. 52, pp. 967–73.10.2320/matertrans.L-MZ201108 ↗
18. D.-H. Choi, B.-W. Ahn, C.-Y. Lee, Y.-M. Yeon, K. Song, and S.-B. Jung: Intermetallics, 2011, vol. 19, pp. 125–30.10.1016/j.intermet.2010.08.030 ↗
19. T. Ogura, K. Ueda, Y. Saito, and A. Hirose: Mater. Trans. JIM, 2011, vol. 52, pp. 979–84.10.2320/matertrans.L-MZ201112 ↗
20. J. Wilden, J.P. Bergmann, and S. Jahn: Adv. Eng. Mater., 2006, vol. 8, pp. 212–18.10.1002/adem.200600006 ↗
21. Smithells Metal Reference Book, 7th ed., E.A. Brandes and G.B. Brook, eds., Oxford, U.K., 1992.
22. W. Zhou, L. Liu, B. Li, Q. Song, and P. Wu: J. Electron. Mater., 2009, vol. 38, no. 2, pp. 356–64.10.1007/s11664-008-0587-0 ↗
23. A.I. Zaitsev, N.E. Zaitseva, R.Y. Shinko, N.A. Arutyunyan, S.F. Dunaev, V.S. Kraposhin, and H.T. Lam: J. Phys. Cond. Matter., 2008, vol. 20, p. 114121.10.1088/0953-8984/20/11/114121 ↗
24. M. Kowalski and P.J. Spencer: J. Phase Equil., 1993, vol. 14, no. 4, pp. 432–38.10.1007/BF02671961 ↗
25. M. Watanabe, K. Feng, Y. Nakamura, and S. Kumai: Mater. Trans. JIM, 2011, vol. 52, pp. 953–59.10.2320/matertrans.L-MZ201120 ↗
26. S. Takeshi, O. Masafumi, E. Seiichi, and M. Kazuya: Q. J. Jpn. Weld. Soc., 2000, vol. 18, pp. 365–72.10.2207/qjjws.18.365 ↗
27. A. Arora, Z. Zhang, A. De, and T. DebRoy: Scripta Mater., 2009, vol. 61, pp. 863–66.10.1016/j.scriptamat.2009.07.015 ↗
28. P. Heurtier, C. Desrayaud, and F. Montheillet: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1537–42.10.4028/www.scientific.net/MSF.396-402.1537 ↗
29. H. Schmidt and J. Hattel: Modell. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77–93.10.1088/0965-0393/13/1/006 ↗
30. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng.A., 2006, vol. 419, pp. 381–88.10.1016/j.msea.2005.09.041 ↗
31. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A., 2006, vol. 419, pp. 389–96.10.1016/j.msea.2005.09.040 ↗
32. K. Masaki, Y.S. Sato, M. Maeda, and H. Kokawa: Scripta Mater., 2008, vol. 58, pp. 355–60.10.1016/j.scriptamat.2007.09.056 ↗
33. M. Militzer, W.P. Sun, and J.J. Jonas: Acta Metall. Mater., 1994, vol. 42, pp. 133–41.10.1016/0956-7151(94)90056-6 ↗
34. I.E. Gunduz, T. Ando, E. Shattuck, P.Y. Wong, and C.C. Doumanitis: Scripta Mater., 2005, vol. 52, pp. 939–43.10.1016/j.scriptamat.2004.12.015 ↗
35. K.V. Jata and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
36. Ø. Frigaard, Ø. Grong, and O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–1200.10.1007/s11661-001-0128-4 ↗
37. A. Gerlich, G. Avramovic-Cingara, and T.H. North: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2773–86.10.1007/BF02586110 ↗
38. C.I. Chang, C.J. Lee, and J.C. Huang: Scripta Mater., 2004, vol. 51, pp. 509–14.10.1016/j.scriptamat.2004.05.043 ↗
39. A. Askari, S. Silling, B. London, and M. Mahoney: Friction Stir Welding and Processing, TMS, Warrendale, PA, 2001, pp. 43–54.
40. R. Qiu, S. Satonaka, and C. Iwamoto: Mater. Des., 2009, vol. 30, pp. 3686–89.10.1016/j.matdes.2009.02.012 ↗
41. R. Ayer, H.W. Jin, R.R. Mueller, S. Ling, and S. Ford: Scripta Mater., 2005, vol. 53, pp. 1383–87.10.1016/j.scriptamat.2005.08.042 ↗
42. W.B. Lee, M. Schmuecker, U.A. Mercardo, G. Biallas, and S.B. Jung: Scripta Mater., 2006, vol. 55, pp. 355–58.10.1016/j.scriptamat.2006.04.028 ↗
43. K.S. Bang, K.J. Lee, H.S. Bang, and H.S. Bang: Mater. Trans., 2011, vol. 52, no. 5, pp. 974–78.10.2320/matertrans.L-MZ201114 ↗
44. A. Kostka, R.S. Coelho, J. dos Santos, and A.R. Pyzalla: Scripta Mater., 2009, vol. 60, pp. 953–56.10.1016/j.scriptamat.2009.02.020 ↗
45. P. Xue, D.R. Ni, D. Wang, B.L. Xiao, and Z.Y. Ma: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4683–89.10.1016/j.msea.2011.02.067 ↗
46. FullProf: WinPLOTR Software, A Graphic Tool For Powder Diffraction, Version 2006.
47. M.N. Avettand-Fènoël, R. Taillard, C. Herbelot, and A. Imad: Mater. Sci. Forum, 2010, vols. 638–642, pp. 1209–14.10.4028/www.scientific.net/MSF.638-642.1209 ↗
48. M.-N. Avettand-Fènoël, R. Taillard, and G. Ji: Mater. Sci. Forum, 2012, vols. 706–709, pp. 959–64.10.4028/www.scientific.net/MSF.706-709.959 ↗
49. T.R. McNelley, S. Swaminathan, and J.Q. Su: Scripta Mater., 2008, vol. 58, pp. 349–54.10.1016/j.scriptamat.2007.09.064 ↗
50. S.R. Ren, Z.Y. Ma, and L.Q. Chen: Scripta. Mater., 2007, vol. 56, pp. 69–72.10.1016/j.scriptamat.2006.08.054 ↗
51. H.J. Liu, J.J. Shen, L. Zhou, Y.Q. Zha, C. Liu, and L.Y. Kuang: Sci. Technol. Weld. Joi., 2011, vol. 16, no. 1, pp. 92–98.10.1179/1362171810Y.0000000007 ↗
52. W. Jost: Diffusion in Solids, Liquids, Gases, E.M. Loebl, ed., Academic Press, New York, NY, 1960.
53. D. Liu, L. Zhang, Y. Du, H. Xu, S. Liu, and L. Liu: CALPHAD, 2009, vol. 33, pp. 761–68.10.1016/j.calphad.2009.10.004 ↗
54. H.T.G. Hentzell and K.N. Tu: J. Appl. Phys., 1983, vol. 54, pp. 6929–37.10.1063/1.332000 ↗
55. R. Taillard, C.E. Bruzek, and E. Florianova: Proc. Int. Conf. Solid to Solid Phase Transformations, Nemacolin Woodlands, PA, TMS, Warrendale, PA, 1994, pp. 1183–88.
56. D.Y. Ying and D.L. Zhang: J. Alloy. Compd., 2000, vol. 311, pp. 275–82.10.1016/S0925-8388(00)01094-X ↗
57. F. Hodaj and P.J. Desré: Acta Mater., 1996, vol. 11, pp. 4485–90.10.1016/1359-6454(96)00085-7 ↗
58. T. Watanabe, H. Takayama, and A. Yanagisawa: J. Mater. Process. Technol., 2006, vol. 178, pp. 342–49.10.1016/j.jmatprotec.2006.04.117 ↗
59. D. Goran, G. Ji, M.N. Avettand-Fènoël, and R. Taillard: Mater. Sci. Forum, 2012, vols. 702-703, pp. 574–77.10.4028/www.scientific.net/MSF.702-703.574 ↗
60. M. Kajihara: Acta Mater., 2004, vol. 52, pp. 1193–1200.10.1016/j.actamat.2003.10.047 ↗
61. N. Ponweiser, C.L. Lengauer, and K.W. Richter: Intermetallics, 2011, vol. 19, pp. 1737–46.10.1016/j.intermet.2011.07.007 ↗
62. R. Taillard, M.N. Avettand-Fènoël, C. Herbelot, and A. Imad: Proc. Journées Annuelles de la Société Française de Métallurgie et de Matériaux, Nancy, France, 2011.
63. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais, and T. Pardoen: Progr. Mater. Sci., 2012, vol. 57, no. 1, pp. 95–183.10.1016/j.pmatsci.2011.05.003 ↗
64. L.E. Svensson, L. Karlsson, H. Larsson, B. Karlsson, M. Fazzini, and. J. Karlsson: Sci. Tech. Weld. Joi., 2000, vol. 5, pp. 285–96.10.1179/136217100101538335 ↗
65. Y.S. Sato, M. Urata, and H. Kokawa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 625–35.10.1007/s11661-002-0124-3 ↗
66. G. Mrówka-Nowotnik and J. Sieniawski: J. Mater. Process. Technol., 2005, vols. 162–163, pp. 367–72.10.1016/j.jmatprotec.2005.02.115 ↗
67. T. Watanabe, A. Yoneda, A. Yanagisawa, S. Konuma, and O. Ohashi: Yosetsu Gakkai Ronbunsu, 1999, vol. 17, pp. 223–33.
68. M. Girard, B. Huneau, C. Genevois, X. Sauvage, and G. Racineux: Sci. Tech. Weld. Joi., 2010, vol. 15, pp. 661–65.10.1179/136217110X12720264008475 ↗
69. P. Ramachandrarao and M. Laridjani: J. Mater. Sci., 1974, vol. 9, pp. 434–37.10.1007/BF00737844 ↗
70. R. Pretorius, T.K. Marais, and C.C. Theron: Mater. Sci. Eng. R, 1993, vol. 10, pp. 1–83.
71. D. Moreno, J. Garrett, and J.D. Embury: Intermetallics, 1999, vol. 7, pp. 1001–09.10.1016/S0966-9795(99)00020-5 ↗
72. X.K. Peng, R. Wuhrer, G. Heness, and W.Y. Yeung: J. Mater. Sci., 1999, vol. 34, pp. 2029–38.10.1023/A:1004543306110 ↗
73. L.E. Murr: J. Mater. Eng. Perf., 2010.
74. Y. Funamizu and K. Watanabe: Trans. Jpn. Inst. Met., 1971, vol. 12, pp. 147–52.10.2320/matertrans1960.12.147 ↗
75. S. Guyot: Ph.D. Dissertation, University of Lille 1, France, 2005.
76. M. Watanabe, K. Feng, Y. Nakamura, and S. Kumai: Mater. Trans., 2011, vol. 52, pp. 953–59.10.2320/matertrans.L-MZ201120 ↗