journal article·2012-05

Microstructure Evolution during Supersolvus Heat Treatment of a Powder Metallurgy Nickel-Base Superalloy

S. L. Semiatin, K. E. McClary, A. D. Rollett, C. G. Roberts, E. J. Payton, F. Zhang, T. P. Gabb

Publisher page

Abstract

Microstructure evolution during the supersolvus heat treatment of a powder-metallurgy, low-solvus, high-refractory (LSHR) superalloy was established. For this purpose, three lots of LSHR with varying initial carbon/boron composition and thermomechanical history were subjected to a series of short-time (induction) and long-time (furnace) heat treatments followed by scanning electron microscopy/electron backscatter diffraction and quantitative metallography. The size of the (pinned) gamma grains exhibited a limited dependence on heating rate and soak time at peak temperature, and it was generally smaller than the predictions based on the classic Smith-Zener model. The differences were rationalized in terms of stereological and pinning-particle location effects. Observations of limited coarsening of the carbide/boride pinning particles were interpreted in the context of prior experimental observations and a modified Lifshitz-Slyosov-Wagner model applied previously for the coarsening of compound phases in steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. R.M. Forbes Jones and L.A. Jackman: JOM, 1999, vol. 51, no. 1, pp. 27–31.10.1007/s11837-999-0007-9 ↗
2. M.J. Donachie Jr., Ed., Superalloys Source Book, ASM International, Materials Park, OH, 1984.
3. T.P. Gabb, J. Gayda, and J. Falsey: Report NASA/TM-2005-213649, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2005, http://gltrs.grc.nasa.gov.
4. D.D. Krueger, R.D. Kissinger, R.G. Menzies, and C.S. Wukusick: US Patent 4,957,567, 1990.
5. E.L. Raymond, R.D. Kissinger, A.J. Paxson, and E.S. Huron: US Patent 5,584,947, 1996.
6. E.S. Huron, J.A. Heaney, D.P. Mourer, J.R. Groh, E.L. Raymond, D.A. Utah, M.J. Weimer, and K.R. Bain: US Patent Application 2009/0000706 A1, 2009.
7. C. Zener: Private Communication to C.S. Smith in Trans. AIME, 1948, vol. 175, pp. 15–51.
8. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
9. P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
10. K. Song and M. Aindow: Mater. Sci. Eng. A, 2008, vol. A479, pp. 365–72.10.1016/j.msea.2007.09.055 ↗
11. E.J. Payton: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 2009.
12. C.R. Roberts: Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2007.
13. C.R. Roberts, S.L. Semiatin, and A.D. Rollett: Scripta Mater., 2007, vol. 56, pp. 899–902.10.1016/j.scriptamat.2007.01.034 ↗
14. S. Bjorklund, L.F. Donaghey, and M. Hillert: Acta Metall., 1972, vol. 20, pp. 867–74.10.1016/0001-6160(72)90079-X ↗
15. S.K. Bhattacharyya and K.C. Russell: Metall. Trans., 1972, vol. 3, pp. 2195–99.10.1007/BF02643232 ↗
16. J.E. Morral and G.R. Purdy: Scripta Metall. Mater., 1994, vol. 30, pp. 905–08.10.1016/0956-716X(94)90413-8 ↗
17. H.M. Lee, S.M. Allen, and M. Grujicic: Metall. Trans. A, 1991, vol. 22A, pp. 2863–68.10.1007/BF02650247 ↗
18. H.M. Lee and S.M. Allen: Metall. Trans. A, 1991, vol. 22A, pp. 2877–88.10.1007/BF02650249 ↗
19. P. Tao, C. Zhang, Z-G. Yang, and T. Hiroyuki: J. Iron Steel Res., Int., 2010, vol. 17, no. 5, pp, 74–78.10.1016/S1006-706X(10)60103-3 ↗
20. K. Miyata, T. Omura, T. Kushida, and Y. Komizo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1565–73.10.1007/s11661-003-0303-x ↗
21. A. Gustafson: Mater. Sci. Eng. A, 2000, vol. A287, pp. 52–58.10.1016/S0921-5093(00)00827-3 ↗
22. D. Ramakrishna and S.P. Gupta: Mater. Sci. Eng., 1987, vol. 92, pp. 179–91.10.1016/0025-5416(87)90168-6 ↗
23. S. Ghosh: Scripta Mater., 2010, vol. 63, pp. 273–76.10.1016/j.scriptamat.2010.04.002 ↗
24. J. Gayda, T.P. Gabb, and P.T. Kantzos: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
25. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, 2005. http://gltrs.grc.nasa.gov.
26. S.L. Semiatin and D.R. Barker: US Patent 5,447,580, 1995.
27. J. Gayda, T.P. Gabb, and P.T. Kantzos: US Patent 6,660,110, 2003.
28. G.F. Mathey: US Patent 5,312,497, 1994.
29. S. Ganesh and R.G. Tolbert: US Patent 5,527,020, 1996.
30. J. Lemsky: Ladish Co., Cudahy, WI, Unpublished research, 2006.
31. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
32. D.J. Srolovitz, M.P. Anderson, and G.S. Grest: Acta Metall., 1984, vol. 32, pp. 793–802.10.1016/0001-6160(84)90152-4 ↗
33. D.J. Srolovitz, M.P. Anderson, G.S. Grest, and P.S. Sahni: Acta Metall., 1984, vol. 32, pp. 1429–38.10.1016/0001-6160(84)90089-0 ↗
34. E.S. Huron, R.L. Casey, M.F. Henry, and D.P. Mourer: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 667–76.10.7449/1996/Superalloys_1996_667_676 ↗
35. E.S. Huron, K.R. Bain, D.P. Mourer, J.J. Schirra, P.L. Reynolds, and E.E. Montero: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 73–81.10.7449/2004/Superalloys_2004_73_81 ↗
36. E.J. Payton: Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum, Germany, Unpublished research, 2011.
37. J.C. Russ and R.T. DeHoff: Practical Stereology, Kluwer Academic/Plenum Publishers, New York, NY, 2000.10.1007/978-1-4615-1233-2 ↗
38. T.P. Gabb and D.R. Miller: National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, Unpublished research, 2010.
39. T.P. Gabb, J. Gayda, J. Telesman, and P.T. Kantzos: Report NASA/TM-2005-213645, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2005, http://gltrs.grc.nasa.gov.
40. H-J. Jou: Report NASA/CR-2010-216748, QuesTek Innovations LLC, Evanston, IL, July 2010, http://gltrs.grc.nasa.gov.
41. A.K. Koul and F.B. Pickering: Acta Metall., 1982, vol. 30, pp. 1303–08.10.1016/0001-6160(82)90149-3 ↗
42. P.R. Rios: Acta Metall., 1987, vol. 35, pp. 2805–14.10.1016/0001-6160(87)90280-X ↗
43. H.A. Calderon, P.W. Voorhees, J.L. Murray, and G. Kostorz: Acta Metall. Mater., 1994, vol. 42, pp. 991–1000.10.1016/0956-7151(94)90293-3 ↗
44. D.S. Berry: J. Appl. Phys., 1973, vol. 44, pp. 3792–93.10.1063/1.1662846 ↗
45. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: Superalloys 2000, T.M. Pollock, R.D. Kisssinger, R.R. Bowman, K.A. Green, M. Mclean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 263–72.10.7449/2000/Superalloys_2000_263_272 ↗
46. R.V. Patil and G.B. Kale: J. Nucl. Mater., 1996, vol. 230, pp. 57–60.10.1016/0022-3115(96)80010-9 ↗
47. G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, and T. Maki: Acta Mater., 2007, vol. 55, pp. 5027–38.10.1016/j.actamat.2007.05.023 ↗