journal article·2001-04

Interfacial criterion of spontaneous and forced engulfment of reinforcing particles by an advancing solid/liquid interface

G. Kaptay

Publisher page

Abstract

The sign of the interfacial force acting between a ceramic particle and a solidification front through the thin layer of a liquid metal is determined by the sign of the quantity Δσ cls. A new, generally valid equation has been developed for this parameter: Δσ cls = 2σ cs− σ cl− σ sl(where σ cs, σ cl, and σ slare the interfacial energies in the ceramic/solid metal, in the ceramic/liquid metal, and in the solid metal/liquid metal systems, respectively). The interfacial force is attractive, i.e., spontaneous engulfment of reinforcing particles by the front is expected, if Δσ cls < 0. A new estimation method has also been developed for the quantity σ cs. Combining this equation with the new equation for Δσ cls, the approximated expressions with easily available parameters for the parameter Δσ cls have been obtained for normal metals (Δσ cls = σ cv− σ lv· (0.08 + 1.22 · cos Θclv)) and for Si and Ge (Δσ cls = σ cv− σ lv· (0.57 + 1.66 · cos Θclv), where σ cvand σ lvare the surface energy of the ceramic and the surface tension of the liquid metal, respectively, while Θclv is the contact angle of the liquid metal on the ceramics). Calculations performed with these equations are in good qualitative agreement with all known pushing/engulfment experiments for metal/ceramic systems. Particularly, it has been theoretically predicted that, while in the majority of normal metal/ceramic and Ge/ceramic systems pushing (and, at higher solidification rates, forced engulfment) is expected, primary Si crystals (crystallizing from hypereutectic Al-Si and other alloys) will spontaneously engulf the majority of ceramic phases. The so-called “pushing/spontaneous engulfment” (PSE) diagrams have been constructed to help make a quick judgement as to whether spontaneous engulfment or pushing is expected in a given metalceramic system. For systems with Δσ cls > 0, a new equation (similar to that derived earlier by Chernov et al.) has been derived to estimate the critical velocity of the pushing-engulfment transition (PET). Calculations with this equation show excellent quantitative agreement with the critical interface velocity of the PET in the Al/ZrO2 (250 µm) system, measured recently under microgravity conditions by Stefanescu et al.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. D.R. Uhlmann, B. Chalmers, and K.A. Jackson: J. Appl. Phys., 1964, vol. 35, pp. 2986–93.10.1063/1.1713142 ↗
2. G.F. Bolling and J. Cissé: J. Cryst. Growth, 1971, vol. 10, pp. 56–66.10.1016/0022-0248(71)90046-7 ↗
3. A.W. Neumann, J. Székely, and E.J. Rabenda: J. Coll. Interface Sci., 1973, vol. 43, pp. 727–32.10.1016/0021-9797(73)90417-7 ↗
4. A.A. Chernov, D.E. Temkin, and A.M. Mel’nikova: Sov. Phys. Cryst., 1976, vol. 21, pp. 369–73.
5. D.E. Temkin, A.A. Chernov, and A.M. Mel’nikova: Sov. Phys. Cryst., 1977, vol. 22, pp. 13–17.
6. A.A. Chernov, D.E. Temkin, and A.M. Mel’nikova: Sov. Phys. Cryst., 1977, vol. 22, pp. 656–58.
7. A.A. Chernov and D.E. Temkin: and in 1976 Crystal Growth and Materials, E. Kaldis and H.J. Scheel, eds., North-Holland Publishing Co., Amsterdam, 1977, pp. 3–77.
8. A.A. Chernov and V.L. Bronstein: Sov. Phys. Crystallogr., 1978, vol. 23, pp. 4–8.
9. M.K. Surappa and P.K. Rohatgi: J. Mater. Sci. Lett., 1981, vol. 16, pp. 765–72.
10. C. Körber, G. Rau, M.D. Cosman, and E.G. Cravalho: J. Cryst. Growth, 1985, vol. 72, pp. 649–62.10.1016/0022-0248(85)90217-9 ↗
11. D.M. Stefanescu, B.K. Dhindaw, S.A. Kacar, and A. Moitra: Metall. Trans., 1988, vol. 19A, pp. 2847–55.10.1007/BF02645819 ↗
12. J. Pötschke, V. Rogge: J. Cryst. Growth, 1989, vol. 94, pp. 726–38.10.1016/0022-0248(89)90097-3 ↗
13. R. Sasikumar, T.R. Ramamohan, and B.C. Pai: Acta Metall., 1989, vol. 37, pp. 2085–91.10.1016/0001-6160(89)90094-1 ↗
14. D.M. Stefanescu, A. Moitra, A.S. Kacar, and B.K. Dhindaw: Metall. Trans. A, 1990, vol. 21A, pp. 231–39.10.1007/BF02656440 ↗
15. R. Sasikumar and M. Kumar: Acta Metall. Mater., 1991, vol. 39, pp. 2503–08.10.1016/0956-7151(91)90065-9 ↗
16. D. Shangguan, S. Ahuja, and D.M. Stefanescu: Metall. Trans. A, 1992, vol. 23A, pp. 669–80.10.1007/BF02801184 ↗
17. R.P. Smith, D. Li, D.W. Francis, J. Chappuis, and A.W. Neumann: J. Coll. Interface Sci., 1993, vol. 157, pp. 478–84.10.1006/jcis.1993.1210 ↗
18. S. Ahuja, D.M. Stefanescu, and B.K. Dhindaw in Proc. of 2nd Int. Conf. on Cast Metal Matrix Composites, D.M. Stefanescu and S. Sen, eds., University of Alabama, Tuscaloosa, AL, 1993, pp. 44–56.
19. K. Mukai and W. Lin: Tetsu-to-Hagané, 1994, vol. 80, pp. 527–32.10.2355/tetsutohagane1955.80.7_527 ↗
20. K. Mukai and W. Lin: Tetsu-to-Hagané, 1994, vol. 80, pp. 533–38.10.2355/tetsutohagane1955.80.7_533 ↗
21. K. Mukai and W. Lin: Proc. Int. Conf. High-Temperature Capillarity, N. Eustathopoulos, ed., Slovak Academy of Science, Bratislava, 1995, pp. 391–95.
22. Q. Han and J.D. Hunt: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 693–99.10.2355/isijinternational.35.693 ↗
23. D.M. Stefanescu, R.V. Phalnikar, H. Pang, S. Ahuja, and B.K. Dhindaw: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 700–07.10.2355/isijinternational.35.700 ↗
24. G. Kaptay: Mater. Sci. Forum, 1996, vols. 215–216, pp. 467–74.
25. K. Mukai: Tetsu-to-Hagané, 1996, vol. 82, pp. 8–14.10.2355/tetsutohagane1955.82.1_8 ↗
26. F.R. Juretzko, D.M. Stefanescu, B.K. Dhindaw, and S. Sen: in Processing, Properties and Applications of Cast Metal Matrix Composites, P.K. Rohatgi, ed., TMS, Warrendale, PA, 1996, pp. 21–31.
27. S. Sen, B.K. Dhindaw, D.M. Stefanescu, A. Catalina, and P.A. Curreri: J. Cryst. Growth, 1997, vol. 173, pp. 574–84.10.1016/S0022-0248(96)00802-0 ↗
28. U. Hecht and S. Rex: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 867–74.10.1007/s11661-997-0074-x ↗
29. S. Sen, W.F. Kaukler, P. Curreri, and D.M. Stefanescu: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2129–35.10.1007/s11661-997-0170-y ↗
30. H. Nakae and S. Wu: Key Eng. Mater., 1997, vols. 127–131, pp. 503–10.
31. H. Nakae and S. Wu: Mater. Sci. Eng., 1998, vol. A252, pp. 232–38.10.1016/S0921-5093(98)00664-9 ↗
32. H. Shibata, H. Yin, S. Yoshinaga, T. Emi, and M. Suzuki: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 149–56.10.2355/isijinternational.38.149 ↗
33. D.M. Stefanescu and A.V. Catalina: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 503–05.10.2355/isijinternational.38.503 ↗
34. G. Kaptay: Proc. HTC 97, N. Eustathopoulos and N. Sobczak, eds., Foundry Research Institute, Cracow, Poland, 1998, pp. 388–93.
35. D.M. Stefanescu, F.R. Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1697–1706.10.1007/s11661-998-0092-3 ↗
36. G. Kaptay: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1887–90.10.1007/s11661-999-0189-3 ↗
37. D.M. Stefanescu, F.R. Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1890–94.10.1007/s11661-999-0190-x ↗
38. G. Kaptay: Mater. Sci. Forum, 2000, vols. 329–330, pp. 121–26.10.4028/www.scientific.net/MSF.329-330.121 ↗
39. G. Kaptay: Metall. Mater: Trans. A, 2000, vol. 31A, pp. 1695–1700.10.1007/s11661-000-0183-2 ↗
40. D.M. Stefanescu, F.R. Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1700–05.10.1007/s11661-000-0184-1 ↗
41. R. Asthana, P.K. Rohatgi, and S.N. Tewari: in Microstructure Formation during Solidification of Metal Matrix Composites, P.K. Rohatgi, ed., TMS, Warrendale, PA, 1993, pp. 11–28.
42. A. Mortensen and I. Jin: Int. Mater. Rev., 1992, vol. 37, ed. pp. 101–28.10.1179/imr.1992.37.1.101 ↗
43. R. Asthana and S.N. Tewari: J. Mater. Sci., 1993, vol. 28, pp. 5414–25.10.1007/BF00367810 ↗
44. R. Asthana and S.N. Tewari: Composite Manufacturing, 1993, vol. 4, pp. 3–25.10.1016/0956-7143(93)90012-W ↗
45. Q.F. Li and D.G. McCartney: J. Mater. Processing Technol., 1994, vol. 41, pp. 249–62.10.1016/0924-0136(94)90164-3 ↗
46. P.K. Rohatgi, K. Pasciak, C.S. Narendranath, S. Ray, and A. Sachdev: J. Mater. Sci., 1994, vol. 29, pp. 5357–66.10.1007/BF01171548 ↗
47. R. Asthana: J. Mater. Sci., 1998, vol. 33, pp. 1679–98 and 1959–80.10.1023/A:1004308027679 ↗
48. Z. Wang, K. Mukai, and I.J. Lee: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 553–62.10.2355/isijinternational.39.553 ↗
49. G. Kaptay and K.K. Kelemen: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 305–307.10.2355/isijinternational.41.305 ↗
50. H.A. Lorentz: Abh. Theoret. Phys., 1907, vol. 1, pp. 23–57.
51. H. Brenner: Chem. Eng. Sci., 1961, vol. 16, pp. 242–51.10.1016/0009-2509(61)80035-3 ↗
52. S. Yuu and Y. Fukui: AIChE J., 1981, vol. 27, pp. 168–70.10.1002/aic.690270125 ↗
53. P.G. Saffman: J. Fluid Mech., 1968, vol. 31, pp. 624–30.10.1017/S0022112068999990 ↗
54. R.S. Bradley: Phil. Mag., 1932, vol. 13, pp. 853–62.10.1080/14786449209461990 ↗
55. B.V. Deryagin: Koll. Z., 1934, vol. 69(2), pp. 155–64.10.1007/BF01433225 ↗
56. A.W. Adamson: Physical Chemistry of Surfaces, 5th ed., John Wiley & Sons, New York, NY, 1990, pp. 258–90.
57. B.V. Deryagin, Y.I. Rabinovich, and N.V. Churaev: Nature, 1978, vol. 272, pp. 313–19.10.1038/272313a0 ↗
58. E.J.W. Verwey and J.T.G. Overbeek: Theory of Stability of Lyophobic Colloids, Elsevier, Amsterdam, 1948.
59. B.V. Deryagin, N.A. Krotova, and V.P. Smilga: Adhesion in Solids, Consultants Bureau, New York, NY, 1978, especially p. 286.10.1007/978-1-4615-8189-5 ↗
60. G. Kaptay, E. Báder, and L. Bolyán: Mater. Sci. Forum, 2000, vols. 329–30, pp. 151–56.10.4028/www.scientific.net/MSF.329-330.151 ↗
61. Metals Reference Book, C.I. Smithells, ed., Butterworth and Co., London, 1976.
62. V.I. Nizhenko and L.I. Floka: Surface Tension of Liquid Metals, Metallurgiia, Moscow, 1981 (in Russian).
63. T. Iida and R.I.L. Guthrie: Physical Properties of Liquid Metals, Clarendon Press, Oxford, United Kingdom, 1988.
64. J.V. Naidich: Progr. Surface Membrane Sci., 1981, vol. 14, pp. 353–492.10.1016/B978-0-12-571814-1.50011-7 ↗
65. J.G. Li: Cer. Int., 1994, vol. 20, pp. 391–412.10.1016/0272-8842(94)90027-2 ↗
66. N. Eustathopoulos, M.G. Nicholas, and B. Drevet: Wettability at High Temperatures, Pergamon, Amsterdam, 1999.
67. D. Turnbull: J. Appl. Phys., 1950, vol. 21, pp. 1022–28.10.1063/1.1699435 ↗
68. N. Eustathopoulos: Int. Met. Rev., 1983, vol. 28, pp. 189–210.10.1179/imr.1983.28.1.189 ↗
69. L. Gránásy and M. Tegze: Mater. Sci. Form, 1991, vol. 77, pp. 243–55.10.4028/www.scientific.net/MSF.77.243 ↗
70. R.M. Pilliar and J. Nutting: J. Phil. Mag., 1967, vol. 16, pp. 181–88.10.1080/14786436708229267 ↗
71. L.E. Murr: Mater. Sci. Eng., 1973, vol. 12, pp. 277–83.10.1016/0025-5416(73)90038-4 ↗
72. A. Soper, B. Gilles, and N. Eustathopoulos: Mater. Sci. Forum, 1996, vols. 207–209, pp. 433–36.
73. W.R. Tyson and W.A. Miller: Surface Sci., 1977, vol. 62, pp. 267–76.10.1016/0039-6028(77)90442-3 ↗
74. A.R. Miedema: Z. Metallk., 1978, vol. 69, pp. 287–92.
75. G. Kaptay: Thesis on Habilitation, Miskolc, 1998, p. 61 (in Hungarian).
76. G. Kaptay: Proc. of 5th EUROMAT, L.A.J.L. Sarton and H.B. Zeedijk, eds., FEMS, Maastricht, 1997, pp. 435–38.
77. G. Kaptay: Mater. Sci. Forum, 1996, vols. 215–16, pp. 475–84.
78. P.K. Rohatgi, S. Ray, R. Asthana, and C.S. Narendranath: Mater. Sci. Eng., 1993, vol. A162, pp. 163–72.10.1016/0921-5093(90)90041-Z ↗
79. Y. Waseda and W.A. Miller: Trans. JIM, 1978, vol. 19, pp. 546–52.10.2320/matertrans1960.19.546 ↗
80. A. Miedema and R. Boom: Z. Metallk., 1978, vol. 69, pp. 183–89.
81. L.F. Mondolfo: in Grain Refinement in Castings and Welds, G.J. Abbaschian and S.A. David, eds., TMS, Warrendale, PA, 1982, pp. 3–52.
82. I. Jin and D.J. Lloyd: in Fabrication of Particulate Reinforced Metal Composites, J. Masonuave and A. Dhingra, eds., 1990, ASM INTERNATIONAL, Materials Park, OH, pp. 47–52.
83. P.K. Rohatgi, F.M. Yarandi, Y. Liu, and R. Asthana: Mater. Sci. Eng., 1991, vol. A147, pp. L1-L6.10.1016/0921-5093(91)90813-3 ↗
84. P.K. Rohatgi, C.S. Narendranath, S. Ray, and R. Asthana: in Microstructure Formation during Solidification of Metal Matrix Composites, P.K. Rohatgi, ed. TMS, Warrendale, PA, 1993, pp. 1–9.
85. A.R. Kennedy and A.E. Karantzalis: in High Temperature Capillarity, N. Eustathopoulos and N. Sobczak, eds., Foundry Research Institute, Cracow, Poland, 1998, pp. 328–33 and 394–99.
86. A. Pamies, C. Garcia-Cordovilla, and E. Louis: Scripta Metall., 1984, vol. 18, pp. 869–72.10.1016/0036-9748(84)90251-5 ↗
87. G. Kaptay: Mater. Sci. Forum, 1991, vol. 77, pp. 315–30.10.4028/www.scientific.net/MSF.77.315 ↗
88. V. Laurent, D. Chatain, and N. Eustathopoulos: J. Mater. Sci., 1987, vol. 22, pp. 244–50.10.1007/BF01160579 ↗
89. K. Landry, C. Rado, and N. Eustathopoulos: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3181–91.
90. M.W. Barsoum and P.D. Ownby: in Surfaces and Interfaces in Ceramic-Metallic Systems, J. Pash and A. Evans, eds., Plenum Press, Elmsford, NY, 1981, pp. 463–71.
91. A.C. Ferro and B. Derby: Acta Metall. Mater, 1995, vol. 43, pp. 3061–73.10.1016/0956-7151(95)00014-M ↗
92. V. Laurent, C. Rado, and N. Eustathopoulos: Mater. Sci. Eng., 1996, vol. A205, pp. 1–8.
93. D. Muscat, R.L. Harris, and R.A.L. Drew: Acta Metall. Mater., 1994, vol. 42, pp. 4155–63.10.1016/0956-7151(94)90192-9 ↗
94. W.D. Kingery: J. Am. and Cer. Soc., 1942, vol. 37, pp. 42–45.10.1111/j.1151-2916.1954.tb14002.x ↗
95. V. Laurent, D. Chatain, C. Chatillon, and N. Eustathopoulos: Acta Metall., 1988, vol. 36, pp. 1797–1803.10.1016/0001-6160(88)90248-9 ↗
96. X.B. Zhou and J.T.M. de Hosson: Acta Mater., 1996, vol. 44, pp. 421–26.10.1016/1359-6454(95)00235-9 ↗
97. D. Sotiropoulou and P. Nikolopoulos: J. Mater. Sci., 1991, vol. 26, pp. 1395–1402.10.1007/BF00544484 ↗
98. F.R. Juretzko, B.K. Dhindaw, D.M. Stefanescu, S. Sen, and P.A. Curreri: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1691–96.10.1007/s11661-998-0091-4 ↗
99. N. Eustathopoulos, J.C. Joud, P. Desre, and J.M. Hicter: J. Mater. Sci., 1974, vol. 9, pp. 1233–42.10.1007/BF00551836 ↗
100. L. Couduier, J. Adorian, D. Piquie, and N. Eustathopoulos: Rev. Int. Hautes Temper. Refract., 1984, vol. 21, pp. 81–93.