Type IV Cracking Susceptibility in Weld Joints of Different Grades of Cr-Mo Ferritic Steel
Source abstract
Abstract
Relative type-IV cracking susceptibility in 2.25Cr-1Mo, 9Cr-1Mo, and 9Cr-1MoVNb ferritic steel weld joint has been assessed. The type-IV cracking was manifested as preferential accumulation of creep deformation and cavitation in the relatively soft intercritical region of heat affected zone of the weld joint. The type-IV cracking susceptibility has been defined as the reduction in creep-rupture strength of weld joint compared to its base metal. The 2.25Cr-1Mo steel exhibited more susceptibility to type-IV cracking at relatively lower temperatures; whereas, at higher temperatures, 9Cr-1MoVNb steel was more susceptible. The relative susceptibility to type-IV cracking in the weld joint of the Cr-Mo steels has been rationalized on the basis of creep-strengthening mechanisms operating in the steels and their venerability to change on intercritical heating during weld thermal cycle, subsequent postweld heat treatment, and creep exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. C.D. Lundin, P. Liu: WRC Bull., 2002, vol. 475, pp. 29–135
2. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, S.L. Mannan: Int. J. Pressure Vessels Piping, 2000, vol. 77, pp. 761–6910.1016/S0308-0161(00)00060-0 ↗
3. H.J. Shüller, L. Haigh, A. Woitscheck: Der Machinenschaden, 1974, vol. 47, pp. 1–13
4. C.J. Middleton, J.M. Brear, R. Munson, and R. Viswanathan: Proc. Advances in Materials Technology for Fossil Power Plants, R. Viswanathan, W.T. Braker, and J.D. Parker, eds., University of Wales, Swansea, 2001, pp. 69–78.
5. S.J. Brett: Proc. Advances in Materials Technology for Fossil Power Plants, R. Viswanathan, W.T. Braker, and J.D. Parker, eds., University of Wales, Swansea, 2001, pp. 343–51.
6. I.A. Shibli: Engineering Issues in Turbine Machinery, Power Plant and Renewables, Trinity College, Dublin, Ireland, A. Strang, R.D. Conroy, W.M. Banks, M. Blacker, J. Leggett, G.M. McColvin, S. Simpson, M. Smith, F. Starr, and R.W. Vantone, eds., The Institute of Materials, Minerals and Mining, London, 2003, pp. 261–79
7. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, and S.L. Mannan: Heat Resistant Materials, Gatlinburg, TN, 1995, pp. 399–404.
8. K.S. Chandravathi, K. Laha, K. Bhanu Sankara Rao, S.L. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp. 559–6510.1179/026708301101510212 ↗
9. C.D. Lundin, J.A. Henning, R. Menon, and K.K. Khan: ORNL Report No. ORNL/Sub/81-07685/02&77, Oak Ridge National Laboratory, Oak Ridge, TN, 1987
10. M. Nakashoro, S. Kihara, F. Kishimoto, T. Fujimori: ISIJ Int., 1990, vol. 30, pp. 823–2810.2355/isijinternational.30.823 ↗
11. V.S. Srinivasan, K. Laha, K. Bhanu Sankara Rao, S.L. Mannan, B. Raj: Trans. Ind. Inst. Met., 2005, vol. 58 (2–3), pp. 255–59
12. K. Laha, K.S. Chandravathi, P. Parameswaran, S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58–6810.1007/s11661-006-9050-0 ↗
13. L. Dejun, K. Shinozaki, H. Kuriki, H. Harada, K. Ohishi: Sci. Technol. Weld. Join., 2003, vol. 8 (4), pp. 296–30210.1179/136217103225005453 ↗
14. G. Eggeler, A. Ramteke, M. Coleman, B. Chew, G. Peter, A. Burblies, J. Hald, C. Jefferey, J. Rantala, M. deWhite, R. Mohrmann: Int. J. Pressure Vessels Piping, 1994, vol. 60, pp. 237–5710.1016/0308-0161(94)90125-2 ↗
15. B.G. Ivarsson, R. Sandstrom: in Creep and Fracture of Engineering Materials and Structure, B. Wilshire, D.R.J. Owen, eds., Pineridge Press, Swansea, 1981, pp. 661–69
16. B.J. Cane: Acta Metall., 1981, vol. 29, pp. 1581–91.10.1016/0001-6160(81)90040-7 ↗
17. J.M. Vitek, R.H. Klueh: Metall. Trans. A, 1983, vol. 14A, pp. 1047–5510.1007/BF02670443 ↗
18. P.J. Ennis, A. Zielinska-Lipiec, O. Wachter, A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45 (12), pp. 4901–0710.1016/S1359-6454(97)00176-6 ↗
19. R.G. Baker, J. Nutting: J. Iron Steel Inst., 1956, vol. 192, pp. 257–68
20. B.W. Jones, C.R. Hills, D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049–5810.1007/BF02661098 ↗
21. K. Kimura, H. Kushima, F. Abe, K. Suzuki, S. Kumai, and A. Satoh: Advanced Materials for 21st Century Turbines and Power Plant, Cambridge, UK, 2000, A. Straang, W.M. Banks, R.D. Conroy, G.M. McColvin, J.C. Neal, and S. Simpson, eds., The Institute of Materials, London, 2000, pp. 590–602
22. H.K. Danielsen, J. Hald: Energy Mater., 2006, vol. 1 (1), pp. 49–5710.1179/174892306X99732 ↗
23. P.J. Ennis and A. Czyrska-Filemonowicz: Sadhana, 2003, vol. 28, Parts 3&4, pp. 709–3010.1007/BF02706455 ↗
24. P. Roy and T. Lauritzen: Weld. J.– Res. Suppl., 1986, pp. 45s–47s
25. Y. Tsuchida, K. Okamoto, Y. Tokunaga: Weld. Int., 1996, vol. 10 (6), pp. 27–3310.1080/09507119609549030 ↗
26. F. Abe, M. Igarashi, S. Anikawa, M. Tabuchi, T. Itagaki, K. Kimura, and K. Yamaguchi: Advanced Materials for 21st Century Turbines and Power Plant, Cambridge, UK, 2000, A. Straang, W.M. Banks, R.D. Conroy, G.M. McColvin, J.C. Neal, and S. Simpson, eds., The Institute of Materials, London, 2000, pp. 129–42
27. M. Morinaga, R. Hashizume and Y. Murata: Materials for Advanced Power Engineering, Part 1, Liege, Belgium, D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khan, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, and D.V. Thronton eds., Dordrecht, Kluwer Acedamic Publishers, 1994, pp. 319–28
28. Y. Hasegawa, M. Ohgahi, and Y. Okamura: Int. Conf. Advances in Materials Technology for Fossil Power Plants, University of Wales, Swansea, April 5–6, 2001, R. Viswanathan, W.T. Braker, and J.D. Parker, eds., The Institute of Metals, London, 2001, pp. 457–66
29. F. Abe, M. Tabuchi, M. Kondo, S. Tsukamoto: IJVP, 2007, vol. 84, pp. 44–5210.1016/j.ijpvp.2006.09.013 ↗
30. P. Hofer, M.K. Miller, S.S. Babu, S.A. David, H. Cerjak: ISIJ Int., 2002, vol. 42, pp. S62–S6610.2355/isijinternational.42.Suppl_S62 ↗
31. M. Tabuchi, H. Hongo, and Y. Takahashi: Proc. ASME Pressure Vessels and Piping Division Conference, Part III, Vancouver, BC, Canada, July 2006, pp. 23–27
32. K. Sawada, M. Takeda, M. Maruyama, R. Ishii, M. Yamada, Y. Nagae, R. Komine: Mater. Sci. Eng., 1999, vol. A267, pp. 19–2510.1016/S0921-5093(99)00066-0 ↗
33. N. Abe, Y. Kunisada, T. Sugiyama, T. Nagamine: Rivita Italian Delta Saldatura, 1990, vol. 2, pp. 44–51
34. M. DeWitte, C. Coussement: Mater. High Temp., 1991, vol. 9 (4), pp. 178–8410.1080/09603409.1991.11689658 ↗