Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition
Source abstract
Abstract
The texture and crystal orientation of Ti-6Al-4V components, manufactured by shaped metal deposition (SMD), is investigated. SMD is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape components. This involves sequential layer by layer deposition with repeated partial melting and heat treatment, which results in epitaxial growth of large elongated prior β grains. This leads to a directionally solidified texture, where the prior β grains exhibit only a small misorientation with each other. The β grains grow in \( \left\langle { 100} \right\rangle \) direction with a second \( \left\langle { 100} \right\rangle \) direction perpendicular to the wall surface. During cooling, the α phase transformation follows the Burgers orientation relationship leading to a Widmanstatten structure, with orientation relations between most of the α lamellae and also of the residual β phase. The directionally solidification and the transformation into the α phase following the Burgers relationship results in a texture, where the hcp pole figures look similar to bcc pole figures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. B. Baufeld and O. Van Der Biest: Sci. Technol. Adv. Mater., 2009, vol. 10, p. 10.10.1088/1468-6996/10/1/015008 ↗
2. B. Baufeld, O. Van Der Biest, and R. Gault: Mater. Des., 2010, in press.
3. B. Baufeld, O. Van Der Biest, R. Gault, and K. Ridgway: TRAM 2009, IOP Conf. Series: Materials Science and Engineering, London, United Kingdom, 2010.
4. B. Baufeld, O. Van Der Biest, and R. Gault: Int. J. Mater. Res., 2009, vol. 100, pp. 1536–42.10.3139/146.110217 ↗
5. R. Boyer, G. Welsch, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 28–29.
6. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1861–67.10.1007/s11661-004-0094-8 ↗
7. C. Charles and N. Järvstrat: 11th World Conf. on Titanium (Ti-2007), Kyoto, Japan, 2007, M. Niinomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama, eds., The Japan Institute of Metals, ISBN, 978-4-88903-406-6, pp. 1201–04.
8. S.R. Lampman: in ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., J.R. Davis and P. Allen, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 592–633.10.31399/asm.hb.v02.a0001081 ↗
9. L. Qian, J. Mei, J. Liang, and X. Wu: Mater. Sci. Technol., 2005, vol. 21, pp. 597–60510.1179/174328405X21003 ↗
10. T. Ahmed and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206–11.10.1016/S0921-5093(97)00802-2 ↗
11. F.X. Gil Mur, D. Rodríguez, and J.A. Planell: J. Alloys Compd., 1996, vol. 234, pp. 287–89.10.1016/0925-8388(95)02057-8 ↗
12. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679–91.10.1016/S1359-6454(03)00179-4 ↗
13. M.G. Glavicic, P.A. Kobryn, F. Spadafora, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. 346, pp. 8–18.10.1016/S0921-5093(02)00525-7 ↗
14. W.G. Burgers: Physica, 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
15. M.J. Mills, D.H. Hou, S. Suri, and G.B. Viswanathan: Boundaries & Interfaces in Materials: The David A. Smith Symp., R.C. Pond, W.A.T. Clark, A.H. King, and D.B. Williams, eds., TMS, Warrendale, PA, 1998, pp. 295–301.
16. M.F. Savage, J. Tatalovich, and M.J. Mills: Philos. Mag., 2004, vol. 84, pp. 1127–54.10.1080/1478643032000158305 ↗
17. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗