Quantitative Atomic Force Microscopy Characterization and Crystal Plasticity Finite Element Modeling of Heterogeneous Deformation in Commercial Purity Titanium
Source abstract
Abstract
Using a four-point bend sample of commercial purity titanium deformed to a surface strain around 1.5 pct, the active dislocation slip and twin systems in a microstructural patch of about 15 grains were quantitatively analyzed by a technique combining atomic force microscopy (AFM), backscattered electron (BSE) imaging, and electron backscattered diffraction (EBSD). Local shear distribution maps derived from z-displacement data measured by AFM were directly compared to results of a crystal plasticity finite element (CPFE) simulation that incorporates a phenomenological model of the deformation processes to evaluate the ability of the CPFE model to match the experimental observations. The CPFE model successfully predicted most types of active dislocation slip systems within the grains at correct magnitudes, but the spatial distribution of strains within grains differed between the measurements and the simulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41 (9), pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
2. Z. Yao and R.H. Wagoner: Acta Metall. Mater., 1993, vol. 41 (2), pp. 451–68.10.1016/0956-7151(93)90074-3 ↗
3. F. Delaire, J.L. Raphanel, and C. Rey: Acta Mater., 2000, vol. 48 (5), pp. 1075–87.10.1016/S1359-6454(99)00408-5 ↗
4. O. Diard, S. Leclereq, G. Rousselier, and G. Cailletaud: Int. J. Plasticity, 2005, pp. 691–722.10.1016/j.ijplas.2004.05.017 ↗
5. D. Raabe, M. Sachtleber, Z. Zhao, F. Roters, and S. Zaefferer: Acta Metall. Mater., 2001, vol. 49, pp. 3433–41.10.1016/S1359-6454(01)00242-7 ↗
6. T.R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D.E. Mason, M.A. Crimp, and D. Raabe: Int. J. Plasticity, 2009, vol. 25, pp. 1655–1683.10.1016/j.ijplas.2008.09.002 ↗
7. Z. Yao and R.H. Wagoner: Acta Metall., 1993, vol. 41 (2), pp. 451–68.10.1016/0956-7151(93)90074-3 ↗
8. A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan, and G. Cailletaud: Acta Mater., 2007, vol. 55, pp. 4121–36.10.1016/j.actamat.2007.01.053 ↗
9. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, pp. 409–18.10.1007/BF02648537 ↗
10. F. Bridier, P. Villechaise, and J. Mendez: Acta Mater., 2005, vol. 53, pp. 555–67.10.1016/j.actamat.2004.09.040 ↗
11. S. Zaefferer: Mater. Sci. Eng. A, 2003, vol. 344, pp. 20–30.10.1016/S0921-5093(02)00421-5 ↗
12. J.W. Christian and S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
13. S.E. Harvey, P.G. Marsh, and W.W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 3493–3502.10.1016/0956-7151(94)90481-2 ↗
14. J. Man, K. Obrtlik, C. Blochwitz, and J. Polak: Acta Mater., 2002, vol. 50, p. 3767.10.1016/S1359-6454(02)00167-2 ↗
15. J. Man, K. Obrtlik, and J. Polak: Mater. Sci. Eng. A, 2003, vol. 351, p. 123.10.1016/S0921-5093(02)00846-8 ↗
16. Y. Nakai, S. Fukuhara, and K. Ohnishi: Int. J. Fatigue, 1997, vol. 19, p. S223.10.1016/S0142-1123(97)00023-6 ↗
17. L. Cretegny and A. Saxena: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, p. 305.10.1046/j.1460-2695.2002.00499.x ↗
18. J. Man, M. Petrenec, K. Obrtlik, and J. Polak: Acta Mater., 2004, vol. 52, pp. 5551–61.10.1016/j.actamat.2004.08.014 ↗
19. F. Pettinari-Sturmel, C. Coupeau, N. Clement, and A. Coujou: Mater. Sci. Eng. A, 2004, vol. 387, pp. 103–08.10.1016/j.msea.2004.02.084 ↗
20. S. Frechard, F. Martin, C. Clement, and J. Cousty: Mater. Sci. Eng. A, 2006, vol. 418, pp. 312–19.10.1016/j.msea.2005.11.047 ↗
21. L. Wang, Y. Yang, P. Eisenlohr, T.R. Bieler, M.A. Crimp, and D.E. Mason: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 421–30.10.1007/s11661-009-0097-6 ↗
22. B. Wagenknecht, D. Libiran, S. Poon, and K. Sztykiel, “In-Situ Four-Point Bending Apparatus for Scanning Electron Microscopes,” Senior Design Project, Mechanical Engineering, Michigan State University, Apr. 2008.
23. B.A. Simkin, B.C. Ng, T.R. Bieler, M.A. Crimp, and D.E. Mason: Intermetallics, 2003, vol. 11, pp. 215–23.10.1016/S0966-9795(02)00236-4 ↗
24. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–69.10.1016/0022-5096(92)80003-9 ↗
25. S.R. Kalidindi and L. Anand: Metall. Trans. A, 1993, vol. 24A, pp. 989–92.10.1007/BF02656521 ↗
26. J.J. Fundenberger, M.J. Philippe, F. Wagner, and C. Esling: Acta Mater., 1997, vol. 45, p. 4041.10.1016/S1359-6454(97)00099-2 ↗
27. X. Wu, S.R. Kalidindi, C. Necker, and A.A. Salem: Acta Mater., 2007, vol. 55, p. 423.10.1016/j.actamat.2006.08.034 ↗