Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling
Source abstract
Abstract
The evolution of microstructure and texture in commercially pure titanium has been studied as a function of strain path during rolling using experimental techniques and viscoplastic self-consistent simulations. Four different strain paths, namely unidirectional rolling, two-step cross rolling, multistep cross rolling, and reverse rolling, have been employed to decipher the effect of strain path change on the evolution of deformation texture and microstructure. The cross-rolled samples show higher hardness with lower microstrain and intragranular misorientation compared to the unidirectional rolled sample as determined from X-ray diffraction and electron backscatter diffraction, respectively. The higher hardness of the cross-rolled samples is attributed to orientation hardening due to the near basal texture. Viscoplastic self-consistent simulations are able to successfully predict the texture evolution of the differently rolled samples. Simulation results indicate the higher contribution of basal slip in the formation of near basal texture and as well as lower intragranular misorientation in the cross-rolled samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. B.H. Hanson: Mater. Design, 1986, vol. 7, pp. 301–07.10.1016/0261-3069(86)90099-3 ↗
2. H. Inagaki: Z. Metallkd., 1992, vol. 83, pp. 40–46.
3. S. Noorbaksh and T.D. O’Brien: Mater. Sci. Eng., 1988, vol. 100, pp. 109–14.10.1016/0025-5416(88)90245-5 ↗
4. H.P. Lee, C.S. Esling, and H.J. Bunge: Textures Microstruct., 1988, vol. 7, pp. 317–37.10.1155/TSM.7.317 ↗
5. Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang: Mater. Sci. Eng. A, 2005, vol. 398, pp. 209–19.10.1016/j.msea.2005.03.019 ↗
6. Y. Zhong, F. Yin, and K. Nagai: J. Mater. Res., 2008, vol. 23, pp. 2954–66.10.1557/JMR.2008.0354 ↗
7. H. Hu and R.S. Cline: Textures Microstruct., 1988, vols. 8–9, pp. 191–206.10.1155/TSM.8-9.191 ↗
8. S.H. Hong and D.N. Lee: J. Eng. Mater. Tech., 2002, vol. 124, pp. 13–22.10.1115/1.1419017 ↗
9. M.Y. Huh, S.Y. Cho, and O. Engler: Mater. Sci. Eng. A, 2001, vol. 315, pp. 35–46.10.1016/S0921-5093(01)01207-2 ↗
10. D. Kulhmann-Wilsdorf: Mater. Sci. Eng. A, 1989, vol. 113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
11. B. Bay, N. Hamsen, D.A. Hughes, and D. Kulhmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
12. J.H. Schmitt, J.V. Fernandes, J.J. Grácio, and M.F. Vieira: Mater. Sci. Eng. A, 1991, vol. 147, pp. 143–54.10.1016/0921-5093(91)90840-J ↗
13. T. Özturk: Scripta Metall., 1988, vol. 22, pp. 1611–16.10.1016/S0036-9748(88)80252-7 ↗
14. J. Pospiech, Z. Jasienski, A. Litwora, A. Pitkowski, and J. Gryziecki: Proceedings of the Twelfth International Conference on Texture of Materials (ICOTOM-12), J.A. Szpunar, ed., Montreal, Canada, 1999, pp. 581–90.
15. A.K. Singh and R.A. Schwarzer: Mater. Sci. Eng. A, 2001, vol. 307, pp. 151–17.10.1016/S0921-5093(00)01965-1 ↗
16. A.K. Singh and R.A. Schwarzer: Scripta Mater., 2001, vol. 44, pp. 375–80.10.1016/S1359-6462(00)00592-3 ↗
17. S. Suwas, A.K. Singh, K. Narsimha Rao, and T. Singh: Z. Metallkd., 2002, vol. 93, pp. 918–27.10.3139/146.020918 ↗
18. S. Suwas, A.K. Singh, K. Narsimha Rao, and T. Singh: Z. Metallkd., 2002, vol. 93, pp. 928–37.10.3139/146.020928 ↗
19. S. Suwas, A.K. Singh, K. Narsimha Rao, and T. Singh: Z. Metallkd., 2003, vol. 93, pp. 1313–19.10.3139/146.031313 ↗
20. S. Suwas and A.K. Singh: Mater. Sci. Eng. A, 2003, vol. 356, pp. 368–71.10.1016/S0921-5093(03)00149-7 ↗
21. R. Garg, S. Ranganathan, and S. Suwas: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4582–92.10.1016/j.msea.2010.04.012 ↗
22. R. Garg, N.P. Gurao, S. Ranganathan, and S. Suwas: Phil. Mag., 2011, vol. 91, pp. 4089–4108.10.1080/14786435.2011.600737 ↗
23. N.P. Gurao, A. Ali, and S. Suwas: Mater. Sci. Eng. A, 2009, vol. 504, pp. 24–35.10.1016/j.msea.2008.11.053 ↗
24. N.P. Gurao, S. Sethuraman, and S. Suwas: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7739–50.10.1016/j.msea.2011.06.062 ↗
25. W.F. Hosford: Met. Eng. Q., 1966, vol. 6, pp. 30–6.
26. K. Pawlik: Phys. Stat. Sol. (B), 1986, vol. 134, pp. 477–83.10.1002/pssb.2221340205 ↗
27. R.A. Lebensohn and C.N. Tome: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
28. C.N. Tome, G.R. Cannova, U.F. Kocks, N. Christodoulou, and J.J. Jonas: Acta Metall. Mater., 1984, vol. 32 pp. 1637–53.10.1016/0001-6160(84)90222-0 ↗
29. G.G. Yapici, C.N. Tomé, I.J. Beyerlein, I. Karaman, S.C. Vogel, and C. Liu: Acta Mater., 2009, vol. 57, pp. 4855–65.10.1016/j.actamat.2009.06.050 ↗
30. N.P. Gurao, R. Kapoor, and S. Suwas: Acta Mater., 2011, vol. 59, pp. 3431–46.10.1016/j.actamat.2011.02.018 ↗
31. N.P. Gurao and S. Suwas: J. Mater. Res., 2011, vol. 26, no. 4, pp. 523–32.10.1557/jmr.2010.70 ↗
32. P.G. Patridge: Metall. Rev., 1967, vol. 12, pp. 169–94.10.1179/095066067790138184 ↗
33. N.P. Gurao, R. Kapoor, and S. Suwas: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2794–804.10.1007/s11661-010-0360-x ↗