Influence of Silicon in Low Density Fe-C-Mn-Al Steel
Source abstract
Abstract
The influence of silicon on the microstructure of a Fe-Mn-Al-C ferritic low-density steel is investigated. The formation of κ-carbide, which is known to be detrimental to ductility, can be suppressed by decreasing the aluminum content to 5 wt pct. However, the attempt to compensate the light-weighting effect of aluminum by silicon is not desirable because the precipitation of the (Fe,Mn)5(Si,Al)C and (Fe, Mn)3(Al, Si) DO3 ordered phase in ferrite grains leads to a serious deterioration in ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G.L. Kayak: Met. Sci. Heat Treat., 1969, vol. 11, pp. 95–97.10.1007/BF00652271 ↗
2. P.Y. Lee, C.S. Chiu, Y.J. Gau, and J.K. Wu: High Temp. Mater. Process., 1992, vol. 10, pp. 141–44.10.1515/HTMP.1992.10.3.141 ↗
3. S.T. Shih, C.Y. Tai, and T.P. Perng: Corrosion, 1993, vol. 49, pp. 130–34.10.5006/1.3299207 ↗
4. X.M. Zhu and Y.S. Zhang: Corrosion, 1999, vol. 54, pp. 3–12.10.5006/1.3284826 ↗
5. A.S. Hamada and L.P. Karjalainen: Can. Metall. Q., 2006, vol. 45, pp. 41–48.10.1179/cmq.2006.45.1.41 ↗
6. I. Kalashnikov, O. Acselrad, A. Shalkevich, and L.C. Pereira: J. Mater. Eng. Perform., 2000, vol. 9, pp. 597–602.10.1361/105994900770345430 ↗
7. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
8. U. Brüx, G. Frommeyer, and J. Jimenez: Steel Res., 2002, vol. 73, pp. 543–48.10.1002/srin.200200026 ↗
9. R.A. Howell and D.C. van Aken: Iron Steel Technol., 2009, vol. 6, pp. 193–212.
10. R.G. Baligidad and A. Radharishna: Mater. Sci. Eng. A, 2001, vol. A308, pp. 136–42.10.1016/S0921-5093(00)02026-8 ↗
11. K.T. Park, G. Kim, S.K. Kim, S.W. Lee, S.W. Hwang, and C.S. Lee: Met. Mater. Int., 2010, vol. 16, pp. 1–6.10.1007/s12540-010-0001-3 ↗
12. S.Y. Shin, H. Lee, S.Y. Han, C.H. Seo, K. Choi, S. Lee, N.J. Kim, J.H. Kwak, and K.G. Chin: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 138–48.10.1007/s11661-009-0081-1 ↗
13. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J.H. Kwak, and K.G. Chin: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 138–46.10.1007/s11661-010-0456-3 ↗
14. S.C. Chang, Y.H. Hsiau, and M.T. Jahn: J. Mater. Sci., 1989, vol. 24, pp. 1117–20.10.1007/BF01148807 ↗
15. T. Sahraoui, M. Hadji, and M. Yahi: Mater. Sci. Eng., 2009, vol. 523, pp. 271–76.10.1016/j.msea.2009.06.022 ↗
16. E. Kozeschnik and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2008, vol. 24, pp. 343–47.10.1179/174328408X275973 ↗
17. T. Miyazaki, T. Kozakai, and T. Tsuzuki: J. Mater. Sci., 1986, vol. 21, pp. 2557–64.10.1007/BF01114307 ↗
18. D.G. Morris and S. Gunther: Acta Mater., 1996, vol. 44, pp. 2847–59.10.1016/1359-6454(95)00382-7 ↗
19. S.M. Allen: Phil. Mag., 1977, vol. 36, pp. 181–92.10.1080/00318087708244456 ↗
20. M. Palm: Intermetallics, 2005, vol. 13, pp. 1286–95.10.1016/j.intermet.2004.10.015 ↗
21. J.H. Yu, J.S. Shin, J.S. Bae, Z.H. Lee, T.D. Lee, H.M. Lee, and E.J. Lavernia: Mater. Sci. Eng., 2001, vol. 307, pp. 29–34.10.1016/S0921-5093(00)01960-2 ↗
22. A. Gemperle: Trans. Met. Soc. AIME, 1968, vol. 242, pp. 2287–94.
23. Y. Ustinovshikov and I. Sapegina: J. Mater. Sci., 2004, vol. 39, pp. 1007–16.10.1023/B:JMSC.0000012934.96045.a3 ↗
24. R.G. Davies: Metall. Trans. A, 1979, vol. 10A, pp. 113–18.10.1007/BF02686414 ↗
25. B. Mintz: Mater. Sci. Technol., 2000, vol. 16, pp. 1282–86.10.1179/026708300101507109 ↗
26. T. Gladman: The Phycial Metallurgy of Microalloyed Steels, Maney, London, U.K., 2002.
27. L. Qiao and X. Mao: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3949–56.
28. S.K. Ehlers and M.G. Mendiratta: J. Mater. Sci., 1984, vol. 19, pp. 2203–10.10.1007/BF01058096 ↗