Effect of Carbon Fraction on Stacking Fault Energy of Austenitic Stainless Steels
Source abstract
Abstract
The effect of C fraction (C/N) on stacking fault energy (SFE) of austenitic Fe-18Cr-10Mn steels with a fixed amount of C + N (0.6 wt pct) was investigated by means of neutron diffraction and transmission electron microscopy (TEM). The SFE were evaluated by the Rietveld whole-profile fitting combined with the double-Voigt size-strain analysis for neutron diffraction profiles using neutron diffraction. The measured SFE showed distinguishable difference and were well correlated with the change in deformation microstructure. Three-dimensional linear regression analyses yielded the relation reflecting the contribution of both C + N and C/N: SFE (mJ/m2) = –5.97 + 39.94(wt pct C + N) + 3.81(C/N). As C fraction increased, the strain-induced γ→e martensitic transformation was suppressed, and deformation twinning became the primary mode of plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
2. S. Kibey, J.B. Liu, M.J. Curtis, D.D. Johnson, and H. Sehitoglu: Acta Mater., 2006, vol. 54, pp. 2991–3001.10.1016/j.actamat.2006.02.048 ↗
3. A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3076–90.10.1007/s11661-009-0050-8 ↗
4. D.T. Pierce, J. Bentley, J.A. Jiménez, and J.E. Witting: Scripta Mater., 2012, vol. 66, pp. 753–56.10.1016/j.scriptamat.2012.01.050 ↗
5. T.-H. Lee, E. Shin, C.-S. Oh, H.-Y. Ha, and S.-J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–86.10.1016/j.actamat.2010.01.056 ↗
6. P.J. Brofman and G.S. Ansell: Metall. Trans. A, 1978, vol. 9A, pp. 879–80.10.1007/BF02649799 ↗
7. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 68A, pp. 1901–06.10.1007/BF02646563 ↗
8. R.P. Reed and M.W. Austin: Scripta Metall., 1989, vol. 23, pp. 1359–62.10.1016/0036-9748(89)90059-8 ↗
9. P. Thompson, D.E. Cox, and J.B. Hastings: J. Appl. Crystallogr., 1987, vol. 20, pp. 79–83.10.1107/S0021889887087090 ↗
10. J. Rodriguez-Carvajal: FULLPROF, Version 3.5d, Laboratoire Leon Brillouin, Saclay, France, 1998.
11. D. Balzar and H. Ledbetter: J. Appl. Crystallogr., 1993, vol. 26, pp. 97–103.10.1107/S0021889892008987 ↗
12. T.-H. Lee, C.-S. Oh, and S.-J. Kim: Scripta Mater., 2008, vol. 58, pp. 110–13.10.1016/j.scriptamat.2007.09.029 ↗
13. Z. Nishiyama: Martensitic Transformation, Academic Press Inc., New York, NY, 1971, p. 14.
14. T.-H. Lee, C.-S. Oh, S.-J. Kim, and S. Takaki: Acta Mater., 2007, vol. 55, pp. 3649–62.10.1016/j.actamat.2007.02.023 ↗
15. Y.N. Petrov: Z. Metallkd., 2003, vol. 94, pp. 1012–16.10.3139/146.031012 ↗
16. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2008, vol. 56, pp. 5071–82.10.1016/j.actamat.2008.06.021 ↗
17. H.-Y. Ha, T.-H. Lee, and S.-J. Kim: Metall. Mater. Trans. A, 2012, vol. 41A, pp. 2999–3005.10.1007/s11661-012-1304-4 ↗