An Extended Age-Hardening Model for Al-Mg-Si Alloys Incorporating the Room-Temperature Storage and Cold Deformation Process Stages
Source abstract
Abstract
Abstract In this article, a new age-hardening model for Al-Mg-Si alloys is presented (named NaMo-Version 2), which takes into account the combined effect of cold deformation and prolonged room-temperature storage on the subsequent response to artificial aging. As a starting point, the original physical framework of NaMo-Version 1 is revived and used as a basis for the extension. This is permissible, since a more in-depth analysis of the underlying particle-dislocation interactions confirms previous expectations that the simplifying assumption of spherical precipitates is not crucial for the final outcome of the calculations, provided that the yield strength model is calibrated against experimental data. At the same time, the implementation of the Kampmann–Wagner formalism means that the different microstructure models can be linked together in a manner that enforces solute partitioning and competition between the different hardening phases which form during aging (e.g., clusters, β″ and β′). In a calibrated form, NaMo-Version 2 exhibits a high degree of predictive power, as documented by comparison with experiments, using both dedicated nanostructure and yield strength data as a basis for the validation. Hence, the model is deemed to be well-suited for simulation of thermomechanical processing of Al-Mg-Si alloys involving cold-working operations like sheet forming and stretch bending in combination with heat treatment and welding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. H.R. Shercliff, and M.F. Ashby: Acta Metall., 1990, vol. 38, pp. 1789-02.10.1016/0956-7151(90)90291-N ↗
2. L.M Cheng, W.J. Poole, J.D. Embury, and D.J. Lloyd, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–81.10.1007/s11661-003-0007-2 ↗
3. D.H. Bratland, Ø. Grong, H.R. Shercliff, O.R. Myhr, and S. Tjøtta: Acta Mater., 1997, vol. 45, 1997, pp. 1–22.10.1016/S1359-6454(96)00100-0 ↗
4. C.D. Marioara, H. Nordmark, S.J. Andersen, and R. Holmestad: J. Mater. Sci., 2006, vol. 41, pp. 471–78.10.1007/s10853-005-2470-1 ↗
5. K. Teichmann, C.D. Marioara, K.O. Pedersen, and K. Marthinsen: Mater. Sci. Eng. A, 2013, vol. 565, pp. 228–35.10.1016/j.msea.2012.12.042 ↗
6. R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen: Acta Mater., 2007, vol. 55, pp. 3815–23.10.1016/j.actamat.2007.02.032 ↗
7. M. Torsæter, H.S. Hasting, W. Lefebvre, C.D. Marioara, J.C. Walmsley, S.J. Andersen, and R. Holmestad: J. Appl. Phys., 2010, vol.108, pp. 073527-1-9.10.1063/1.3481090 ↗
8. S.J. Andersen, C.D. Marioara, R. Vissers, A. Frøseth, and H.W. Zandbergen: Mater. Sci. Eng. A, 2007, vol. 444, pp. 157–69.10.1016/j.msea.2006.08.084 ↗
9. R. Vissers, C.D. Marioara, S.J. Andersen, and R. Holmestad: Aluminium Alloys, 2008, vol.2, pp. 1263–69.
10. P.H. Ninive, A. Strandlie, S. Gulbrandsen-Dahl, W. Lefebvre, C.D. Marioara, S.J. Andersen, J. Friis, R. Holmestad, and O.M. Løvvik: Acta Mater., 2014, vol. 69, pp. 126–34.10.1016/j.actamat.2014.01.052 ↗
11. D.W. Pashley, M.H. Jacobs, and J.T. Vietz: Phil. Mag., 1967, vol. 16, pp. 51–76.10.1080/14786436708229257 ↗
12. G. Edwards, K. Stiller, G. Dunlop, and M. Couper: Acta Mater., 1998, vol. 46, pp. 3893–04.10.1016/S1359-6454(98)00059-7 ↗
13. L. Zhen, W.D. Fei, S.B. Kang, and H.W. Kim: J. Mater. Sci., 1997, vol. 32, pp. 1895–0210.1023/A:1018569226499 ↗
14. M. Murayama, K. Hono, M. Saga, and M. Kikuchi: Mater. Sci. Eng. A, 1998, vol. 250, pp. 127–32.10.1016/S0921-5093(98)00548-6 ↗
15. I. Dutta, and S.M. Allen: J. Mater. Sci. Lett., 1991, vol. 10, pp. 323–26.10.1007/BF00719697 ↗
16. W.F. Miao and D.E. Laughlin: Scripta Mater., 1999, vol. 40, pp. 873–78.10.1016/S1359-6462(99)00046-9 ↗
17. C.D. Marioara, S.J. Andersen, J. Jansen, and H.W. Zandbergen: Acta Mater., 2001, vol. 49, pp. 321–28.10.1016/S1359-6454(00)00302-5 ↗
18. S. Pogatscher, H. Antrekowitsch, H. Leitner, T. Ebner, and P.J. Uggowitzer: Acta Mater., 2011, vol. 59, pp. 3352–63.10.1016/j.actamat.2011.02.010 ↗
19. S. Pogatscher, H. Antrekowitsch, and P.J. Uggowitzer: Acta Mater., 2012, vol. 60, pp. 5545–54.10.1016/j.actamat.2012.06.061 ↗
20. O.R. Myhr, and Ø. Grong: Acta Mater., 2000, vol. 48, pp. 1605–15.10.1016/S1359-6454(99)00435-8 ↗
21. O.R. Myhr, Ø. Grong, and S.J. Andersen: Acta Mater., 2001, vol. 49, pp. 65–75.10.1016/S1359-6454(00)00301-3 ↗
22. O.R. Myhr, Ø. Grong, and K.O. Pedersen, Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2276–89.10.1007/s11661-010-0258-7 ↗
23. J. K. Holmen, T. Børvik, O.R. Myhr, H. G. Fjær, and O. S. Hopperstad. Int. J. Impact Eng., 2015, vol. 84, pp. 96–107.10.1016/j.ijimpeng.2015.05.016 ↗
24. O. Engler, C. Schäfer, and O.R. Myhr. Mater. Sci. Eng. A, 2015, vol. 639, pp. 65–74.10.1016/j.msea.2015.04.097 ↗
25. N.H. Hoang, O.S. Hopperstad, O.R. Myhr, C. Marioara, and M. Langseth: Thin-Walled Struct., 2015, vol. 92, pp. 93–103.10.1016/j.tws.2015.02.013 ↗
26. C. Dørum, O.G. Lademo, O.R. Myhr, T. Berstad, and O.S. Hopperstad: Comput. Struct., 2010, vol. 88, pp. 519–28.10.1016/j.compstruc.2010.01.003 ↗
27. O.R. Myhr, Ø. Grong, O.G. Lademo, and T. Tryland: Weld. J., 2009, vol. 88, pp. 42–45.
28. O.R. Myhr, Ø. Grong, H.G. Fjær and C.D. Mariorara: Acta Mater., 2004, vol. 52, pp. 4997–08.10.1016/j.actamat.2004.07.002 ↗
29. O.R. Myhr and Ø. Grong: ASM Handbook, Welding Fundamentals and Processes, ASM, vol. 6A, 2011, pp. 797–18.
30. J. Johnsen, J.K. Holmen, O.R. Myhr, O.S. Hopperstad, and T. Børvik: Comput. Mater. Sci., vol. 79, 2013, pp. 724–35.10.1016/j.commatsci.2013.07.035 ↗
31. S. Esmaeili, D.J. Lloyd, and W.J. Poole: Acta Mater., 2003, vol. 51, pp. 3467–81.10.1016/S1359-6454(03)00167-8 ↗
32. S. Esmaeili, X. Wang, D.J. Lloyd, and W.J. Poole: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 751–63.
33. X. Wang, W.J. Poole, S. Esmaeili, D.J. Lloyd, and J.D. Embury: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2913–23.10.1007/s11661-003-0191-0 ↗
34. E. Nes: Acta Mater., 1995, vol. 43, pp. 2189–07.10.1016/0956-7151(94)00409-9 ↗
35. J.A. Sæter, B. Forbord, H.E. Vatne, and E. Nes: Proc. 6th International Conference on Aluminium Alloys, Toyohashi, Japan, 1998, pp. 113–26.
36. E. Nes, and K. Marthinsen: Mater. Sci. Eng., 2002, vol. A322, pp. 176–93.10.1016/S0921-5093(01)01130-3 ↗
37. M. Murayama and K. Hono: Acta Mater., 1999, vol. 47, pp. 1537–48.10.1016/S1359-6454(99)00033-6 ↗
38. Y. Takaki, Y. Aruga, M. Kozuka, and T. Sato: Proc. 14th International Conference on Aluminium Alloys, Materials Science Forum vol. 794–796, 2014, pp. 1026–31.10.4028/www.scientific.net/MSF.794-796.1026 ↗
39. M. J. Starink, N. Gao, L. Davin, J. Yan, and A. Cerezo: Phil. Mag., 2005, vol. 85, pp. 1395–17.10.1080/14786430412331333374 ↗
40. P. Lang, P. Mohn, A. Falahati, and E. Kozeschnik: Proc. 13th International Conference on Aluminium Alloys, Wiley & Sons, Inc., 2012, pp. 273–77.10.1007/978-3-319-48761-8_42 ↗
41. Z. Liang: Doctoral Thesis, Institute of Applied Materials, Berlin, 2012/2013.
42. A. Bahrami: Doctoral Thesis, Delft University of Technology, Department of Material Science and Engineering, Delft, 2010.
43. A.K. Gupta, and D.J. Lloyd: Metall. Mater. Trans. A, 1999, vol. 13A, pp. 879–84.10.1007/s11661-999-1021-9 ↗
44. R. Wagner and R. Kampmann: Material Science and Technology-A Comprehensive Treatment, vol. 5, VCH, 1991, pp. 213–03.
45. R. Kampmann, H. Eckerlebe, and R. Wagner: Mat. Res. Soc. Symp. Proc., MRS, 1987, vol. 57, pp. 525–42.
46. K.C. Russel: Phase Transformations, ASM, Metals Park, OH, 1970, pp. 219–68.
47. C. Ravi, and C. Wolverton: Acta Mater., 2004, vol. 52, pp. 4213-27.10.1016/j.actamat.2004.05.037 ↗
48. K. Teichmann, C.D. Marioara, S.J. Andersen, and K. Martinsen: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4006–14.10.1007/s11661-012-1235-0 ↗
49. K. Teichmann, C.D. Marioara, S.J. Andersen, and K. Martinsen: Mater. Charact., 2013, vol. 75, pp. 1–7.10.1016/j.matchar.2012.10.003 ↗
50. J.D. Embury, and R.B. Nicholson: Acta Metall., 1965, vol. 13, pp. 403–17.10.1016/0001-6160(65)90067-2 ↗
51. G.W. Lorimer, and R.B. Nicholson: Acta Metall., 1966, vol. 14, pp. 1009–13.10.1016/0001-6160(66)90229-X ↗
52. A. Deschamps, and Y. Brechet: Acta Mater., 1999, vol. 47, pp. 293–05.10.1016/S1359-6454(98)00296-1 ↗
53. D.A. Porter and K.E Easterling: Phase Transformations in Metals and Alloys, Wokingham (England), Van Nostrand Reinhold Co. Ltd., 1981.
54. W.J. Poole, H.R. Shercliff, and T. Castillo: Mater. Sci. Technol., 1997, vol. 13, pp. 897–04.10.1179/mst.1997.13.11.897 ↗
55. E.P. Karadeniz, P. Lang, P. Warczok, A. Falahati, W. Jun, and E. Kozeschnik: CALPHAD, Computer Coupling of Phase Diagrams and Thermochemistry, Elsevier, 2013, vol. 43, pp. 94–104.10.1016/j.calphad.2013.03.004 ↗
56. T. Furu, Ø. Ryen, and O.R. Myhr: Proc. 11th Int. Conf. on Aluminium Alloys, Aachen, Germany, Wiley-VCH, 2008, pp. 1626–33.
57. U.F. Kocks: 1966. Phil. Mag. 1966, vol. 13, pp. 541–66.10.1080/14786436608212647 ↗
58. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Oxford (UK), Elsevier Ltd., 2004, pp. 469–78.10.1016/B978-008044164-1/50019-0 ↗
59. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Company, New York, 1976, pp. 190–99.
60. I. Westermann, O.S. Hopperstad, K. Martinsen, and B. Holmedal: J. Mater. Sci., 2010, vol. 45, pp. 5323–31.10.1007/s10853-010-4580-7 ↗
61. A.L. Dons, E.K. Jensen, Y. Langsrud, E. Trømborg, and S. Brusethaug: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2135–46.10.1007/s11661-999-0025-9 ↗
62. A.L. Dons: J. Light Met., 2001, vol. 1, pp. 133-48.10.1016/S1471-5317(01)00007-4 ↗
63. J. Friedel: Dislocations, Pergamon Press, Oxford, 1964.10.1016/B978-0-08-013523-6.50011-9 ↗
64. F.R.N. Nabarro: Theory of Crystal Dislocations, Oxford University Press, Oxford (UK), 1967.
65. B. Reppich: Material Science and Technology-A Comprehensive Treatment, vol. 6, VCH, 1993, pp. 311–57.
66. Y. Aruga, M. Kozuka, Y. Takaki, and T. Sato: Proc. 14th International Conference on Aluminium Alloys, Materials Science Forum vol. 794–796, 2014, pp. 897–02.10.4028/www.scientific.net/MSF.794-796.897 ↗
67. M. F. Ashby, and D. R. H. Jones: Engineering Materials—An Introduction to their Properties and Applications, Oxford (England), Pergamon Press, 1980.
68. J.E. Hatch: Aluminium-Properties and Physical Metallurgy, American Society for Metals, Metals Park, OH, 1984.
69. J. Gerold: Dislocations in Solids, vol. 4, North Holland Publ. Co., Amsterdam, 1979.
70. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, 1997.10.1017/CBO9780511623134 ↗
71. M. Khadyko, O.R. Myhr, S. Dumoulin, and O.S. Hopperstad: Modelling and Simulation in Materials Science and Engineering, in press.
72. D. Bardel, M. Perez, D. Nelias, A. Deschamps, C.R. Hutchinson, D. Maisonnette, T. Chaise, J. Garnier, and F. Bourlier: Acta Mater., 2014, vol. 62, pp. 129–40.10.1016/j.actamat.2013.09.041 ↗
73. A. Bahrami, A. Miroux, and J. Sietsma: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4445–53.10.1007/s11661-012-1211-8 ↗
74. B. Holmedal, E. Osmundsen, and Q. Du: Metall. Mater. Trans. A, in press.
75. Q. Du, B. Holmedal, J. Friis, and C. Marioara: Metall. Mater. Trans. A, in press.