Microstructural Evolution in the Transient-Liquid-Phase Bonding Area of IN-738LC/BNi-3/IN-738LC
Source abstract
Abstract
Transient-liquid-phase (TLP) bonding of the IN-738LC base alloy with BNi-3 interlayer was investigated in this article. Effects of the TLP bonding thermal cycle on the base alloy were studied microstructurally and macrostructurally. Microscopic investigation revealed that the microstructural evolution in the TLP bonding area was affected substantially by the bonding temperature. Therefore, a critical bonding temperature (T cr ) was defined for TLP bonding of IN-738LC/BNi-3/IN-738LC samples. Unlike bonding below T cr , TLP bonding at temperatures higher than T cr resulted in formation of individual γ-γ′ colonies in the adjacent base alloy to TLP bonding zone and caused significant reduction in the isothermal solidification kinetic. During TLP bonding at temperatures less than T cr , B-rich precipitates with two different morphologies, blocky and acicular, were formed in the adjacent base alloy to the TLP bonding zone. Microhardness and three-point bending tests were carried out in order to determine the effect of these formed constituents in the TLP bonding area on the mechanical properties of bonded samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. D.F. Paulonis, D.S. Duvall, and W.A. Owczarski: U.S. Patent 3,678,570, 1972
2. W.D. MacDonald, T.W. Eagar: Metal Science of Joining Conf., TMS, Warrendale, PA, 1992, pp. 93–100
3. C.G. Bieber, Suffern, and J.J. Galka: U.S. Patent 3,459,545, 1969
4. IN-738: Technical Data, The International Nickel Company Inc., New York, NY, 1981, pp. 1–11
5. R. Kayacana, R. Varola, O. Kimilli: Mater. Res. Bull., 2004, vol. 39, pp. 2171–8610.1016/j.materresbull.2004.08.003 ↗
6. M.H. Haafkens, G.H. Matthey: Weld. J., 1982, vol. 61 (11), pp. 25–30
7. T.J. Moore, K.H. Holko: Weld. J., 1970, vol. 49 (9), pp. 395s–409s
8. J.H.G. Mattheij: Mater. Sci. Technol., 1985, vol. 1 (8), pp. 608–1210.1179/mst.1985.1.8.608 ↗
9. O.A. Idowu, N.L. Richards, M.V. Chaturvedi: Mater. Sci. Eng. A, 2005, vol. 397 (1–2), pp. 98–11210.1016/j.msea.2005.01.055 ↗
10. N.P. Wikstrom, O.A. Ojo, M.V. Chaturvedi: Mater. Sci. Eng. A, 2006, vol. 417 (1–2), pp. 299–30610.1016/j.msea.2005.10.056 ↗
11. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Sci. Technol. Weld. Join., 2004, vol. 9 (6), pp. 532–4010.1179/174329304X8702 ↗
12. O.A. Idowu, O.A. Ojo, M.V. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2787–9610.1007/BF02586111 ↗
13. A. Rabinkin: Sci. Technol. Weld. Join., 2004, vol. 9 (3), pp. 181–9910.1179/136217104225012300 ↗
14. W.E. Gale, E.R. Wallach: J. Mater. Sci., 1992, vol. 27, pp. 5653–6010.1007/BF00541638 ↗
15. Metals Handbook, vol. 10, Material Characterization, 9th ed., ASM, Metals Park, OH, 1986, p. 460
16. A.K. Koul, R. Thamburaj: Metall. Trans. A, 1985, vol. 16A, pp. 17–2610.1007/BF02656707 ↗
17. A.K. Koul, D. Morphy: Microstruct. Sci., 1982, vol. 11, pp. 79–88
18. J.C. Beddoes, W. Wallace: Metallography, 1980, vol. 13 (2), pp. 185–9410.1016/0026-0800(80)90015-4 ↗
19. R.A. Steven, P.E.J. Flewitt: J. Mater. Sci., 1978, vol. 13 (2), pp. 367–7610.1007/BF00647782 ↗
20. R. Rosenthal, D.R.F. West: Mater. Sci. Technol., 1999, vol. 15 (12), pp. 1387–9410.1179/026708399101505518 ↗
21. A.K. Koul, R. Castillo: Metall. Trans. A, 1988, vol. 19A, pp. 2049–6610.1007/BF02645208 ↗
22. D.S. Duvall and W.A. Owczarski: Weld. J., 1971, pp. 401s–409s
23. W. Hoffelner, E. Kny, R. Stickler, W.J. McCall: Z. Werkstofftech., 1979, vol. 10, pp. 84–9210.1002/mawe.19790100307 ↗
24. J.M. Vitek, D.W. Gandy, S.S. Babu, and G.J. Frederick: www.ornl.gov/~webworks/cppr/y2001/pres/120433.pdf
25. W.D. MacDonald, T.W. Eagar: Ann. Rev. Mater. Sci., 1992, vol. 22, pp. 23–4610.1146/annurev.matsci.22.1.23 ↗
26. S. Lebaili, S. Hamar-Thibault: Acta Metall., 1987, vol. 35 (3), pp. 701–1010.1016/0001-6160(87)90194-5 ↗
27. S.K. Tung, L.C. Lim, M.O. Lai: Scripta Mater., 1996, vol. 34 (5), pp. 763–6910.1016/1359-6462(95)00577-3 ↗
28. A. Taylor: Trans. AIME, 1956, Oct., pp. 1356–6210.1007/BF03377886 ↗
29. P. Willemin, M. Durand-Charre: J. Mater. Sci., 1990, vol. 25 (1A), pp. 168–7410.1007/BF00544203 ↗
30. O. Kubaschewski, C.B. Alcock, P.J. Spencer: Materials Thermochemistry, 6th ed., Pergamon, Oxford, United Kingdom, 1993
31. M. Mosallaee, A. Ekrami, K. Ohsasa, K. Matsuura: Mater. Sci. Technol., 2008, vol. 24, pp. 449–5610.1179/174328408X281877 ↗
32. C.W. Sinclair, G.R. Purdy, J.E. Morral: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1187–9210.1007/s11661-000-0114-2 ↗
33. C.W. Sinclair: J. Phase Equilibria, 1999, vol. 20 (4), pp. 361–6910.1361/105497199770340888 ↗
34. J.D. Liu, T. Jin, N.R. Zhao, Z.H. Wang, X.F. Sun, H.R. Guan, Z.Q. Hu: Mater. Sci. Forum, 2007, vols. 546–549, pp. 1245–4810.4028/www.scientific.net/MSF.546-549.1245 ↗
35. B. Jahnke, J. Demny: Thin Solid Films, 1983, vol. 110, pp. 225–3510.1016/0040-6090(83)90240-7 ↗
36. S.K. Tung, L.C. Lim, O.M. Lai, H. Wu: Mater. Sci. Technol., 1997, vol. 13 (12), pp. 1051–5610.1179/mst.1997.13.12.1051 ↗
37. R.B. Scarlin: Scripta Metall., 1976, vol. 10, pp. 711–1510.1016/0036-9748(76)90348-3 ↗
38. R. Rosenthal and D.R.F. West: Mater. Sci. Technol., 1986, vol. 2, Feb., pp. 169–7410.1179/mst.1986.2.2.169 ↗