Evolution of Austenite Recrystallization and Grain Growth Using Laser Ultrasonics
Source abstract
Abstract
Laser ultrasonics is a noncontacting technique with which the attenuation of ultrasonic signals can be measured and related to the grain size of the investigated material. In the present article, a laser-ultrasonic grain-size measurement technique previously developed for various C-Mn and microalloyed steels has been extended to examine austenite recrystallization and subsequent grain growth following hot deformation. The ultrasonic measurements were conducted on a low-carbon (0.05 wt pct) steel that contains Mn, Mo, and Nb as the three main alloying/microalloying elements. The grain-size data measured by ultrasonic experiments were analyzed to quantify the effect of deformation conditions on the evolution of recrystallized grain size and subsequent grain growth. A significant effect of deformation temperature, applied strain, and initial grain size on the grain-size evolution was observed, while strain rate had a negligible effect. Phenomenological modeling approaches were employed to describe the recrystallized grain-size and grain-growth behavior of the present steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. R.I.L. Guthrie, J.J. Jonas: ASM Handbook: Properties and Selection: Irons, Steels and High Performance Alloys, 10th ed., vol. 1, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 115–16
2. A.K. Giumelli, M. Militzer, E.B. Hawbolt: ISIJ Int., 1999, vol. 39, pp. 271–8010.2355/isijinternational.39.271 ↗
3. M. Militzer, A.K. Giumelli, E.B. Hawbolt, T.R. Meadowcroft: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3399–340910.1007/BF02595433 ↗
4. D.Q. Bai, S. Yue, W.P. Sun, J.J. Jonas: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2151–5910.1007/BF02648589 ↗
5. E.J. Palmiere, C.I. Garcia, A.J. DeArdo: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 277–8610.1007/BF02647973 ↗
6. O. Kwon, A.J. DeArdo: Acta Metall. Mater., 1991, vol. 39, pp. 529–3810.1016/0956-7151(91)90121-G ↗
7. C. Choquet, P. Fabrègue, J. Guisti, B. Chamont, J.N. Pezant, Pezant and F. Blanchet: Int. Symp. on Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., MetSoc-CIM, Montreal, QC, Canada, 1990, pp. 34–43
8. A. Quispe, S.F. Medina, P. Valles: ISIJ Int., 1997, vol. 37, pp. 783–8810.2355/isijinternational.37.783 ↗
9. B. Dutta, E.J. Palmiere: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1237–4710.1007/s11661-003-0234-6 ↗
10. K.B. Kang, O. Kwon, W.B. Lee, C.G. Park: Scripta Mater., 1997, vol. 36, pp. 1303–0810.1016/S1359-6462(96)00359-4 ↗
11. S.F. Medina, J.E. Mancila: ISIJ Int., 1996, vol. 36, pp. 1077–8310.2355/isijinternational.36.1077 ↗
12. M. Militzer, E.B. Hawbolt, T.R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1247–8910.1007/s11661-000-0120-4 ↗
13. R. Millsop: Hardenability Concepts with Applications to Steel, D.V. Doane, J.S. Kirkaldy, eds., Metall. Soc. of AIME, Warrendale, PA, 1977, pp. 316–33
14. M. Dubois, M. Militzer, A. Moreau, J.F. Bussière: Scripta Mater., 2000, vol. 42, pp. 867–7410.1016/S1359-6462(00)00305-5 ↗
15. E.P. Papadakis: J. Acoust. Soc. Am., 1965, vol. 37, pp. 703–1010.1121/1.1909399 ↗
16. E.L. Ulmgren, M. Ericsson, D. Artymowicz, B. Hutchinson: Mater. Sci. Forum, 2004, vols. 467–470, pp. 1353–6210.4028/www.scientific.net/MSF.467-470.1353 ↗
17. C.M. Sayers, R.L. Smith: Ultrasonics, 1982, vol. 20, pp. 201–0510.1016/0041-624X(82)90019-1 ↗
18. S.E. Kruger, G. Lamouche, J.-P. Monchalin, R. Kolarik II, G. Jeskey, and M. Choquet: Iron Steel Technol., 2005, vol. 2, pp. 25–31.
19. M. Dubois, M. Militzer, A. Moreau, J.F. Bussière: Grain Growth in Polycrystalline Materials III, H. Weiland, B.L. Adams, A.D. Rollett, eds., TMS, Warrendale, PA, 1998, pp. 593–98
20. S.E. Kruger, A. Moreau, M. Militzer, T. Biggs: Mater. Sci. Forum, 2003, vols. 426–432, pp. 483–8810.4028/www.scientific.net/MSF.426-432.483 ↗
21. D. Lévesque, A. Moreau, M. Lord, M. Dubois, J.P. Monchalin, C. Padioleau, and J.F. Bussière: in Intl. Symp. on Advanced Sensors for Metals Processing, B.W. Brusey, J.F. Bussière, M. Dubois, and A. Moreau, eds., MetSoc-CIM, Montreal, QC, Canada, 1999, pp. 53–65.
22. A. Smith, S.E. Kruger, J. Sietsma, S. Van der Zwaag: ISIJ Int., 2006, vol. 46, pp. 1223–3210.2355/isijinternational.46.1223 ↗
23. A. Moreau, D. Lévesque, M. Lord, M. Dubois, J.-P. Monchalin, C. Padioleau, J.F. Bussière: Ultrasonics, 2002, vol. 40, pp. 1047–5610.1016/S0041-624X(02)00255-X ↗
24. B. Hutchinson, B. Moss, A. Smith, A. Astill, C. Scruby, G. Engberg, and J. Björklund: Ironmaking and Steelmaking, 2002, vol. 29, pp. 77–8010.1179/030192302225001910 ↗
25. A. Moreau, C. Bescond, S. Bolognini, M. Lord, S. Kruger, and C.-S. Man: Proc. World Conf. on Nondestructive Testing 2004, CINDE, Hamilton, ON, Canada, 2004, pp. 3–10
26. S. Sarkar, M. Militzer, W.J. Poole, and A. Moreau: Int. Symp. on Advanced Steels, J.A. Szpunar, H. Li, eds., MetSoc-CIM, Montreal, QC, Canada, 2006, pp. 119–30
27. F.E. Stanke, G.S. Kino: J. Acoust. Soc. Am., 1984, vol. 75, pp. 665–8110.1121/1.390577 ↗
28. B.W. Krakauer, A. Moreau: Int. Symp. on Advanced Sensors for Metals Processing, MetSoc-CIM, Montreal, QC, Canada, 1999, pp. 41–52
29. S. Bolognini, A. Moreau: J. Appl. Phys., 2003, vol. 94, pp. 3771–8010.1063/1.1593220 ↗
30. Y. Pan, C. Rossignol, B. Audoin: J. Acoust. Soc. Am., 2004, vol. 115, pp. 1537–4510.1121/1.1651191 ↗
31. D. Clorennec, D. Royer, H. Walaszek: Ultrasonics, 2002, vol. 40, pp. 783–8910.1016/S0041-624X(02)00210-X ↗
32. S. Sarkar, M. Militzer, W.J. Poole, and F. Fazeli: in Materials Science and Technology (MS&T) 2007, Automotive: Advanced High-Strength and Other Specialty Sheet Steel Products for the Automotive Industry, MS&T’07, Detroit, MI, 2007, pp. 61–72
33. C.M. Sellars: Int. Symp. on Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., MetSoc-CIM, Montreal, QC, Canada, 1990, pp. 1–18
34. J.E. Burke, D. Turnbull: Prog. Met. Phys., 1952, vol. 3, pp. 220–4410.1016/0502-8205(52)90009-9 ↗
35. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Press Ltd., Oxford, United Kingdom., 1996, pp. 281–325
36. D. Liu, F. Fazeli, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 894–90910.1007/s11661-007-9116-7 ↗
37. C.M. Sellars, Q. Zhu: Mater. Sci. Eng. A, 2000, vol. 280A, pp. 1–710.1016/S0921-5093(99)00648-6 ↗