journal article·2002-05

An investigation of the microstructure and strength of open-cell 6101 aluminum foams

J. Zhou, C. Mercer, W. O. Soboyejo

Publisher page

Abstract

This article presents the results of a study of the microstructure and strength of open-cell 6101 aluminum alloy fans with three different levels of pore size (measured in pores per inch (PPI)). The macrostructures and microstructures of open-cell foam struts are characterized using a combination of optical and scanning electron microscopy (SEM). The compositions of the individual phases are also determined via energy-dispersive spectroscopy (EDS). The variations in strut microhardness are then measured using Vickers microindentation techniques. Following the measurement of the mechanical properties of foams, a modified model is used to estimate the relative density from measured strut dimensions. The mechanisms of compressive deformation are then elucidated before presenting a discussion on unit-cell modeling, strut plastic deformation, and the relationships between strut microstructure and microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Tribology and Lubrication Engineering · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley: Metal Foams—A Design Guide, Butterworth, and Co., London, 2000.
2. L.J. Gibson and M.F. Ashby: Cellular Solids: Structure and Properties, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1997.10.1017/CBO9781139878326 ↗
3. P. Cognet, J. Berlan, and G. Lacoste: J. Appl. Electrochem., 1995, vol. 25, pp. 1105–12.10.1007/BF00242537 ↗
4. Jian-Jun Jiang, M. Gasik, J. Laine, and M. Lampinen: J. Alloys Compounds, 2001, vol. 322, pp. 281–85.10.1016/S0925-8388(01)01257-9 ↗
5. D.T. Queheillalt, D.D. Hass, D.J. Sypeck, and H.N.G. Wadley: J. Mater. Res., 2001, vol. 16, pp. 1028–36.10.1557/JMR.2001.0143 ↗
6. A.G. Evans, J.W. Hutchinson, N.A. Fleck, M.F. Ashby, and H.N.G. Wadley: Progr. Mater. Sci., 2001, vol. 46, pp. 309–27.10.1016/S0079-6425(00)00016-5 ↗
7. Chin-Jye Yu, Harald H Eifert, John Banhart, and Joachim Baumeister: Adv. Mater. Processes, 2001, vol. 154, pp. 45–47.
8. U. Waag, L. Schneider, P. Lothman, and G. Stephani: Met. Powder Rep., 1997, vol. 55(1), pp. 29–33.
9. J. Banhart: J. Met., 2000, vol. 52, pp. 22–27.
10. L.J. Gibson: Ann. Rev. Mater. Sci., 2001, vol. 30, pp. 191–227.10.1146/annurev.matsci.30.1.191 ↗
11. L.J. Gibson, M.F. Ashby, G.S. Schajer, and C.I. Robertson: Proc. R. Soc. London A, 1982, vol. 38, pp. 25–42.
12. L.J. Gibson and M.F. Ashby: Proc. R. Soc. London A, 1982, vol. 382, pp. 43–59.10.1098/rspa.1982.0088 ↗
13. G. Gioia, Y. Wang, and A.M. Cuitino: Proc. R. Soc. London A, 2001, vol. 457, pp. 1079–96.10.1098/rspa.2000.0707 ↗
14. Y. Sugimura, A. Rabiei, A.G. Evans, A.M. Harte, and N.A. Fleck: Mater. Sci. Eng. A, 1999, vol. 269, pp. 38–48.10.1016/S0921-5093(99)00147-1 ↗
15. O.B. Olurin, N.A. Fleck, and M.F. Ashby: Scripta Mater., 2000, vol. 43, pp. 683–89.10.1016/S1359-6462(00)00519-4 ↗
16. O.B. Olurin, N.A. Fleck, and M.F. Ashby: Mater. Sci. Eng. A, 1999, vol. 291, pp. 136–46.10.1016/S0921-5093(00)00954-0 ↗
17. K.Y.G. McCullough, N.A. Fleck, and M.F. Ashby: Acta Mater., 1999, vol. 47, pp. 2323–30.10.1016/S1359-6454(99)00128-7 ↗
18. V.S. Deshpande and N.A. Fleck: Int. J. Impact Eng., 2000, vol. 24, pp. 277–98.10.1016/S0734-743X(99)00153-0 ↗
19. H. Bart-Smith, A-F. Bastwros, D.R. Mumm, A.G. Evans, D.J. Sypeck, and H.N.G. Wadley: Acta Mater., 1998, vol. 46, pp. 3583–92.10.1016/S1359-6454(98)00025-1 ↗
20. A.-F. Bastawros, H. Bart-Smith, and A.G. Evans: J. Mech. Phys. Solids, 2000, vol. 48, pp. 311–22.
21. E. Andrews, W. Samders, and L.J. Gibson: Mater. Sci. Eng. A, 1999, vol. 270, pp. 113–24.10.1016/S0921-5093(99)00170-7 ↗
22. H. Kanahashi, T. Mukai, Y. Yamada, K. Shimojima, M. Mabuchi, T.G. Nieh, and K. Higashi: Mater. Sci. Eng. A, 2000, vol. 280, pp. 349–53.10.1016/S0921-5093(99)00704-2 ↗
23. K.Y.G. McCullough, N.A. Fleck, and M.F. Ashby: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 199–208.10.1046/j.1460-2695.2000.00261.x ↗
24. O.B. Olurin, N.A. Fleck, and M.F. Ashby: Mater. Sci. Eng. A, 2000, vol. 291, pp. 136–46.10.1016/S0921-5093(00)00954-0 ↗
25. K.Y.G. McCullough, N.A. Fleck, and M.F. Ashby: Acta Mater., 1999, vol. 47, pp. 2331–43.10.1016/S1359-6454(99)00125-1 ↗
26. E.W. Andrews, L.J. Gibson, and M.F. Ashby: Acta Mater., 1999, vol. 47, pp. 2583–2863.
27. M.A. Fortes and M.F. Ashby: Acta Mater., 1999, vol. 47, pp. 3469–73.10.1016/S1359-6454(99)00204-9 ↗
28. A.E. Simone and L.J. Gibson: Mater. Sci. Eng. A, 2000, vol. 292, pp. 55–62.
29. A.E. Simone and L.J. Gibson: Acta Mater., 1998, vol. 46, pp. 3109–23.10.1016/S1359-6454(98)00017-2 ↗
30. A.E. Simone and L.J. Gibson: Acta Mater., 1998, vol. 46, pp. 2139–50.10.1016/S1359-6454(97)00421-7 ↗
31. E.W. Andrews, G. Gioux, P. Onck, and L.J. Gibson: Int. J. Mech. Sci., 2000, vol. 43, pp. 701–13.10.1016/S0020-7403(00)00043-6 ↗
32. P.R. Onck, E.W. Andrews, and L.J. Gibson: Int. J. Mech. Sci., 2000, vol. 43, pp. 681–99.10.1016/S0020-7403(00)00042-4 ↗
33. T.G. Nieh, K. Higashi, and J. Wadsworth: Mater. Sci. Eng. A, 2000, vol. 283, pp. 105–10.10.1016/S0921-5093(00)00623-7 ↗
34. A.E. Markaki and T.W. Clyne: Acta Mater., 2001, vol. 49, pp. 1677–86.10.1016/S1359-6454(01)00072-6 ↗
35. ASM Metal Handbook, ASM International, Materials Park, OH, 1990.
36. “Standard Test Method for Vickers Hardness of Metallic Materials, ASTM for Vickers Microhardness Testing”, ASTM E 92-82 (Reapproved 1997) Annual Book of ASTM Standards, Danvers, MA, 1999.
37. A.-F. Bastawros: Proc. 1998 ASME Int. Mechanical Engineering, Cong. and Exp., 361–3, pp. 211–17.
38. P. Shrotriya, S.M. Allameh, J. Lou, T. Bucheit, and W.O. Soboyejo: Mechanics and Materials, 2002, in press.
39. S.M. Allameh, B. Gally, S. Brown, and W.O. Soboyejo: Surface Topology and Fatigue in Si MEMS Structures, C.L. Muhlstein and S.B. Brown, eds., ASTM STP 1413, 2001, pp. 3–15.10.1520/STP10976S ↗
40. W.N. Sharpe, Jr., B. Yuan, R. Vaidyanathan, and R.L. Edwards: Proc. SPIE Symp. on Micolithography and Metrology in Micromachining II, Austin, TX, 1996, pp. 78–91.10.1117/12.250969 ↗