journal article·2006-11Open access

Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept

S. J. Park, J. M. Martin, J. F. Guo, John L. Johnson, Randall M. German

Abstract

Time and temperature relationships for grain growth by Ostwald ripening are transformed into the master sintering curve (MSC) form. The resulting MSC equations are used to analyze grain size data obtained from W-Ni-Fe heavy alloys that were quenched from sintering temperatures ranging from 1200 °C to 1500 °C. Activation energies for grain growth during both solid-state and liquid-phase sintering are calculated and compared to experimental values for diffusion. The MSC equations are further modified to include the effect of the solid volume fraction on the grain growth constant. A sensitivity analysis of material properties and process variables shows that the grain growth rate constant is most affected by changes in the sintering temperature and activation energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. P.W. Voorhees:Annu. Rev. Mater. Sci., 1992, vol. 22, pp. 197–215.10.1146/annurev.ms.22.080192.001213 ↗
2. R.M. German:Liquid Phase Sintering, Plenum Press, New York, NY, 1985 pp. 1–11.10.1007/978-1-4899-3599-1 ↗
3. H. Su and D.L. Johnson:J. Am. Ceram. Soc., 1996, vol. 79, pp. 3211–17.10.1111/j.1151-2916.1996.tb08097.x ↗
4. S. J. Park, J. M. Martin, J. F. Guo, J. L. Johnson, and R. M. German:Metall. Mater. Trans. A, 2006, vol. 37, pp. 2837–48.10.1007/BF02586116 ↗
5. G.W. Greenwood:Acta Metall., 1956, vol. 4, pp. 243–48.10.1016/0001-6160(56)90060-8 ↗
6. I.M. Lifshitz and V.V. Slyozov:J. Phys. Chem. Solids, 1961, vol. 19 (1–2), pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
7. R.M. German and E.A. Olevsky:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3057–67.10.1007/s11661-998-0213-z ↗
8. R.M. German:Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
9. R.H. Krock:Proc. ASTM, ASTM, Philadelphia, PA, 1964, vol. 64, pp. 669–79.
10. R. Warren:J. Mater. Sci., 1972, vol. 7, pp. 1434–42.10.1007/BF00574935 ↗
11. R. Warren and M.B. Waldron:Powder Metall., 1972, vol. 15 (30), pp. 166–80.10.1179/pom.1972.15.30.005 ↗
12. T.-K. Kang and D.N. Yoon:Metall. Trans. A, 1978, vol. 9A, pp. 433–38.10.1007/BF02646395 ↗
13. C.H. Kang and D.N. Yoon:Metall. Trans. A, 1981, vol. 12A, pp. 65–69.10.1007/BF02648509 ↗
14. S.S. Kang and D.N. Yoon:Metall. Trans. A, 1982, vol. 13A, pp. 1405–11.10.1007/BF02642878 ↗
15. S.C. Hardy and P.W. Voorhees:Metall. Mater. Trans. A, 1988, vol. 19A, pp. 2713–21.10.1007/BF02645806 ↗
16. S.C. Yang, S.S. Mani, and R.M. German:J. Met., 1990, vol. 42 (5), pp. 16–19.
17. P.W. Voorhees and R.J. Schaefer:Acta Metall., 1987, vol. 35, pp. 327–39.10.1016/0001-6160(87)90241-0 ↗
18. V.A. Snyder, J. Alkemper, and P.W. Voorhees:Acta Mater., 2000, vol. 48, pp. 2689–701.10.1016/S1359-6454(00)00036-7 ↗
19. E.G. Zukas, P.S.Z. Rogers, and R.S. Rogers:Z. Metallkd., 1976, vol. 67, pp. 591–95.
20. L. Kozma, W.J. Huppmann, L. Bartha, and P. Mezei:Powder Metall., 1981, vol. 24, pp. 7–11.10.1179/pom.1981.24.1.7 ↗
21. W.A. Kaysser, S. Takajo, and G. Petzow:Acta Metall., 1984, vol. 32 (1), pp. 115–22.10.1016/0001-6160(84)90208-6 ↗
22. P. Lu and R.M. German:J. Mater. Sci., 2001, vol. 36, pp. 3385–94.10.1023/A:1017943524875 ↗
23. V.A. Snyder, J. Alkemper, and P.W. Voorhees:Acta Mater., 2001, vol. 49, pp. 699–709.10.1016/S1359-6454(00)00342-6 ↗
24. S.C. Yang and P. Nash:Mater. Sci. Technol., 1988, vol. 4, pp. 860–66.10.1179/mst.1988.4.10.860 ↗
25. C. Zubillaga, F. Hernández, J.J. Urcola, and M. Fuentes:Acta Metall., 1989, vol. 37 (7), pp. 1865–72.10.1016/0001-6160(89)90071-0 ↗
26. I. Seyhan, L. Ratke, W. Bender, and P. Voorhees:Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2470–78.10.1007/BF02652341 ↗
27. J. Alkemper, V.A. Snyder, N. Akaiwa, and P.W. Voorhees:Phys. Rev. Lett., 1999, vol. 82 (13), pp. 2725–28.10.1103/PhysRevLett.82.2725 ↗
28. R. Asimov:Acta Metall., 1963, vol. 11, pp. 72–73.10.1016/0001-6160(63)90132-9 ↗
29. S. Sarian and H.W. Weart:J. Appl. Phys., 1966, vol. 37 (4), pp. 1675–81.10.1063/1.1708583 ↗
30. A.J. Ardell:Acta Metall., 1972, vol. 20, pp. 61–71.10.1016/0001-6160(72)90114-9 ↗
31. A.D. Brailsford and P. Wynblatt:Acta Metall., 1979, vol. 27, pp. 489–97.10.1016/0001-6160(79)90041-5 ↗
32. P.W. Voorhees and M.E. Glicksman:Metall. Trans. A, 1984, vol. 15A, pp. 1081–88.10.1007/BF02644701 ↗
33. P.W. Voorhees and M.E. Glicksman:Acta Metall., 1984, vol. 32, p. 2001.10.1016/0001-6160(84)90180-9 ↗
34. P.W. Voorhees and M.E. Glicksman:Acta Metall., 1984, vol. 32, p. 2013.10.1016/0001-6160(84)90181-0 ↗
35. J.A. Marqusee and J. Ross:J. Chem. Phys., 1983, vol. 79, pp. 373–78.10.1063/1.445532 ↗
36. J.A. Marqusee and J. Ross:J. Chem. Phys., 1984, vol. 80, p. 536.10.1063/1.446427 ↗
37. M. Tokuyama and K. Kawasaki:Physica A, 1984, vol. 123, pp. 386–92.10.1016/0378-4371(84)90162-6 ↗
38. M. Tokuyama, K. Kawasaki, and Y. Enomoto:Physica (Amsterdam), 1986, vol. 134A, p. 323.10.1016/0378-4371(86)90053-1 ↗
39. Y. Enomoto, K. Kawasaki, and M. Tokuyama:Acta Metall., 1987, vol. 35, pp. 907–13.10.1016/0001-6160(87)90169-6 ↗
40. Y. Enomoto:Acta Metall., 1991, vol. 39, p. 2013.10.1016/0956-7151(91)90170-6 ↗
41. M. Marder:Phys. Rev. Lett., 1985, vol. 55, p. 2953.10.1103/PhysRevLett.55.2953 ↗
42. M. Marder:Phys. Rev. A., 1987, vol. 36, p. 858.10.1103/PhysRevA.36.858 ↗
43. C.W.J. Beenakker:Phys. Rev. A., 1986, vol. 33, p. 4482.10.1103/PhysRevA.33.4482 ↗
44. R.T. DeHoff:Acta Metall. Mater., 1991, vol. 39, pp. 2349–60.10.1016/0956-7151(91)90016-T ↗
45. N. Akaiwa and P. Voorhees:Phys. Rev. E, 1994, vol. 49, p. 3860.10.1103/PhysRevE.49.3860 ↗
46. S.P. Marsh and M.E. Glicksman: inModelling of Coarsening and Grain Growth, S.P. Marsh, ed., TMS, Warrendale, PA, 1992.
47. S.P. Marsh and M.E. Glicksman:Acta Mater., 1996, vol. 44, pp. 3761–71.10.1016/1359-6454(95)00451-3 ↗
48. H. Mandyam, M.E. Glicksman, J. Helsing, and S.P. Marsh:Phys. Rev. E, 1998, vol. 58, p. 2119.10.1103/PhysRevE.58.2119 ↗
49. D. Fan, L.-Q. Chen, S.P. Chen, and P.W. Voorhees:Comput. Mater. Sci., 1998, vol. 9, pp. 329–36.10.1016/S0927-0256(97)00158-4 ↗
50. V. Tikare and J.D. Cawley:Acta Mater., 1998, vol. 46 (4), pp. 1333–42.10.1016/S1359-6454(97)00269-3 ↗
51. V. Tikare and J.D. Cawley:Acta Mater., 1998, vol. 46 (4), pp. 1343–56.10.1016/S1359-6454(97)00268-1 ↗
52. S. Takajo, W.A. Kaysser, and G. Petzow:Acta Metall., 1984, vol. 32 (1), pp. 107–13.10.1016/0001-6160(84)90207-4 ↗
53. C.K.L. Davies, P. Nash, and R.N. Stevens:Acta Metall., 1980, vol. 28, pp. 179–89.10.1016/0001-6160(80)90067-X ↗
54. J.A. Warren and B.T. Murray:Modelling Simul. Mater. Sci. Eng., 1996, vol. 4, pp. 215–29.10.1088/0965-0393/4/2/008 ↗
55. P. Villars, A. Prince, and H. Okamoto:Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, 1995, vol. 8.
56. S.W.H. Yih and C.T. Wang:Tungsten: Sources, Metallurgy, Properties, and Applications, Plenum Press, New York, NY, 1979.10.1007/978-1-4899-5025-3 ↗
57. R.M. German:Sintering Theory and Practice, John Wiley & Sons, New York, NY, 1996.
58. Diffusion in Solid Metals and Alloys: Landolt-Börnstein, Numerical Data and Functional Relationships, New Series, Group III, H. Mehrer, ed., Springer-Verlag, Alemania, 1990, vol. 26.
59. I.H. Moon, K.Y. Kim, S.T. Oh, and M.J. Suk:J. Alloys Compounds, 1993, vol. 201 (1–2), pp. 129–37.10.1016/0925-8388(93)90873-L ↗
60. S.S. Mani: Master’s Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1991.
61. B.H. Rabin, A. Bose, and R.M. German: inMicrostructural Science, M.E. Blum, P.M. French, R.M. Middleton, and G.F. Vander Voort, eds., Elsevier Scientific, New York, NY, 1987, vol. 15, pp. 285–99.
62. B.H. Rabin and R.M. German:Metall. Trans. A, 1988, vol. 19A, pp. 1523–32.10.1007/BF02674026 ↗
63. A. Eliasson: Ph.D. Thesis, The Royal Institute of Technology, Stockholm, 1992.