Recrystallization and the Development of Abnormally Large Grains After Small Strain Deformation in a Polycrystalline Nickel-Based Superalloy
Source abstract
Abstract
The formation of abnormally large grains has been investigated in the polycrystalline nickel-based superalloy Rene 88DT. Cylindrical specimens with a 15 μm grain size were compressed to plastic strains up to 11.0 pct and subsequently rapidly heated to above the γ′ solvus at 1423 K (1150 $$^\circ $$ C) and held for 60 seconds. All deformed samples partially recrystallized during the heat treatment, with the recrystallized grain size varying with the degree of deformation. The largest final grain size occurred in samples deformed to approximately 2 pct strain, with isolated grains as large as 700 μm in diameter observed. It is proposed that abnormally large grains appear due to nucleation-limited recrystallization, not abnormal grain growth, based on the high boundary velocities measured and the observed reduction in grain orientation spread.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Miao J, Pollock TM, Wayne Jones J. Acta Materialia 2009;57:5964.10.1016/j.actamat.2009.08.022 ↗
2. Miao J, Pollock TM, Wayne Jones J. Acta Materialia 2012;60:2840.10.1016/j.actamat.2012.01.049 ↗
3. Healy JC, Grabowski L, Beevers CJ. Fatigue & Fracture of Engineering Materials & Structures 1992;15:309.10.1111/j.1460-2695.1992.tb01272.x ↗
4. A. Shyam, C.J. Torbet, S.K. Jha, J.M. Larsen, M.J. Caton, C.J. Szczepanski, T.M. Pollock, and J.W. Jones: 10th Int. Symp. Superalloys, Champion, PA, September 2004, pp. 19–23.
5. Humphreys F, Hatherly M. Recrystallization and related annealing phenomena. Pergamon, Oxford, Elsevier2004.
6. Doherty R.D., Hughes D.A., Humphreys F.J., Jonas J.J., Juul Jensen D., Kassner M.E., King W.E., McNelley T.R., McQueen H.J., Rollett A.D. Materials Today 1998;1:14.10.1016/S1369-7021(98)80046-1 ↗
7. Bozzolo N, Agnoli A, Soua N, Bernacki M, Log RE. Materials Science Forum 2013;753:321.10.4028/www.scientific.net/MSF.753.321 ↗
8. Agnoli A, Bernacki M, Log R, Franchet JM, Laigo J, Bozzolo N. Metallurgical and Materials Transactions A 2015.10.1007/s11661-015-3035-9 ↗
9. P. Cotterill and P. Mould: Recrystallization and Grain Growth in Metals, Wiley, New York 1976.
10. Dunn C, Walter J. In: Recrystallization, Grain Growth and Textures: Papers presented at a seminar of the American Society for Metals October 16 and 17, 1965. Metals Park, OH: American Society for Metals, 1966, 461-522.
11. May JE, Turnbull D. Trans Metall Soc AIME 1958;212:769.
12. Gladman T. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 1966;294:298.10.1098/rspa.1966.0208 ↗
13. Messina R, Soucail M, Kubin L. Materials Science and Engineering: A 2001;308:258.10.1016/S0921-5093(00)01979-1 ↗
14. Andersen I., Grong, Ryum N.. Acta Metallurgica et Materialia 1995;43:2689.10.1016/0956-7151(94)00489-5 ↗
15. Payton E, Wang G, Mills M, Wang Y. Acta Materialia 2013;61:1316.10.1016/j.actamat.2012.11.009 ↗
16. Zhu J, Wang T, Ardell A, Zhou S, Liu Z, Chen L. Acta Materialia 2004;52:2837.10.1016/j.actamat.2004.02.032 ↗
17. E. Payton, G. Wang, N. Ma, Y. Wang, M. Mills, D. Whitis, D. Mourer, and D. Wei: 11th Int. Symp. Superalloys, Champion, PA, September 2008, pp. 975–984.10.7449/2008/Superalloys_2008_975_984 ↗
18. Hibbard G, Radmilovic V, Aust K, Erb U. Materials Science and Engineering: A 2008;494:232.10.1016/j.msea.2008.04.054 ↗
19. Aust K, Rutter J. Trans AIME 1959;215:119.
20. Kim SG, Park YB. Acta Materialia 2008;56:3739.10.1016/j.actamat.2008.04.007 ↗
21. Lee YC, Dahle AK, StJohn DH. Metallurgical and Materials Transactions A 2000;31:2895.10.1007/BF02830349 ↗
22. Lee SB, Yoon DY, Henry MF. Acta materialia 2000;48:3071.10.1016/S1359-6454(00)00119-1 ↗
23. Hibbard G, McCrea J, Palumbo G, Aust K, Erb U. Scripta Materialia 2002;47:83.10.1016/S1359-6462(02)00098-2 ↗
24. Srolovitz DJ, Grest GS, Anderson MP. Acta Metallurgica 1985;33:2233.10.1016/0001-6160(85)90185-3 ↗
25. Rollett A, Srolovitz DJ, Anderson MP. Acta Metallurgica 1989;37:1227.10.1016/0001-6160(89)90117-X ↗
26. Riontino G, Antonione C, Battezzati L, Marino F, Tabasso MC. Journal of Materials Science 1979;14:86.10.1007/BF01028331 ↗
27. Petrovic J, Ebert L. Metallurgical Transactions 1972;3:1131.10.1007/BF02642444 ↗
28. Cho YK, Yoon DY, Henry MF. Metallurgical and Materials Transactions A 2001;32:3077.10.1007/s11661-001-0182-y ↗
29. Valiev RZ, Gertsman VY, Kaibyshev OA. Scripta metallurgica 1983;17:853.10.1016/0036-9748(83)90248-X ↗
30. Bennett TA, Kalu PN, Rollett AD. Microscopy and Microanalysis 2011;17:362.10.1017/S1431927611000377 ↗
31. D.A. DeMania: Recovery and Recrystallization in Nickel-based Superalloy René 88 DT. PhD, University of Virginia, 2002.
32. Burke J, Turnbull D. Progress in Metal Physics 1952;3:220.10.1016/0502-8205(52)90009-9 ↗
33. J. Christian: The Theory of Transformations in Metals and Alloys, Pergamon, Oxford, 2002. pp. 832–858.10.1016/B978-008044019-4/50024-6 ↗
34. Beck PA, Sperry PR. Journal of Applied Physics 1950;21:150.10.1063/1.1699614 ↗
35. Bellier S, Doherty RD. Acta Metallurgica 1977;25:521.10.1016/0001-6160(77)90192-4 ↗
36. Bailey JE, Hirsch PB. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 1962;267:11.10.1098/rspa.1962.0080 ↗
37. Tu WJ, Pollock TM. Metallurgical and Materials Transactions A 2010;41:2002.10.1007/s11661-010-0251-1 ↗
38. JC Stinville, MP Echlin, D Texier, F Bridier, P Bocher, TM Pollock: Exp. Mech. 2015. doi:10.1007/s11340-015-0083-4.10.1007/s11340-015-0083-4 ↗
39. Humphreys FJ. Scripta materialia 2000;43:591.10.1016/S1359-6462(00)00442-5 ↗
40. Fridman EM, Kopesky CV, Shwindlerman LS. Zeitschrift fur Metallkunde 1975;66:533.
41. Huang Y, Humphreys FJ. Acta materialia 1999;47:2259.10.1016/S1359-6454(99)00062-2 ↗
42. Jin Y, Lin B, Bernacki M, Rohrer G, Rollett A, Bozzolo N. Materials Science and Engineering: A 2014;597:295.10.1016/j.msea.2014.01.018 ↗
43. Lee SB, Yoon DY, Hwang NM, Henry MF. Metallurgical and Materials Transactions A 2000; 31:985.10.1007/s11661-000-1016-z ↗