Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy
Source abstract
Abstract
The effect of friction stir processing on the superplastic behavior of extruded Al-4Mg-1Zr was examined at 350 °C to 600 °C and at initial strain rates of 1×10−3 to 1 s−1. A combination of a fine grain size of 1.5 μm and high-angle grain boundaries in the friction stir-processed (FSP) alloy led to considerably enhanced superplastic ductility, much-reduced flow stress, and a shift to a higher optimum strain rate and lower optimum temperature. The as-extruded alloy exhibited the highest superplastic ductility of 1015 pct at 580 °C and an initial strain rate of 1×10−2s−1, whereas a maximum elongation of 1280 pct was obtained at 525 °C and an initial strain rate of 1×10−1s−1 for the FSP alloy. The FSP alloy exhibited enhanced superplastic deformation kinetics compared to that predicted by the constitutive relationship for superplasticity in fine-grained aluminum alloys. A possible origin for enhanced superplastic deformation kinetics in the FSP condition is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. N.E. Paton, C.H. Hamilton, J. Wert, and M. Mahoney: J. Met., 1982, vol. 34, pp. 21–27.
2. J. Xinggang, C. Jiangzhong, and M. Longxiang: Acta Metall. Mater., 1993, vol. 41, pp. 2721–27.10.1016/0956-7151(93)90141-E ↗
3. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
4. R.Z. Valiev: Mater. Sci. Eng. A, 1993, vol. A168, pp. 141–48.10.1016/0921-5093(93)90717-S ↗
5. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 2000, vol. 42, pp. 163–68.10.1016/S1359-6462(99)00329-2 ↗
6. R.S. Mishra and M.W. Mahoney: Mater. Sci. Forum, 2001, vols. 357–359, pp. 507–12.10.4028/www.scientific.net/MSF.357-359.507 ↗
7. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, Dec. 1991.
8. S. Benavides, Y. Li, L.E. Murr, D. Brown, and J.C. McClure: Scripta Mater., 1999, vol. 41, pp. 809–15.10.1016/S1359-6462(99)00226-2 ↗
9. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, and W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–64.10.1007/s11661-998-0021-5 ↗
10. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton: Scripta Mater., 1997, vol. 36, pp. 69–75.10.1016/S1359-6462(96)00344-2 ↗
11. K.V. Jata and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
12. Z.Y. Ma, R.S. Mishra, and M.W. Mahoney: Acta Mater., 2002, vol. 50, pp. 4419–30.10.1016/S1359-6454(02)00278-1 ↗
13. Z.Y. Ma and R.S. Mishra: Acta Mater., 2003, vol. 51, pp. 3551–69.10.1016/S1359-6454(03)00173-3 ↗
14. I. Charit, R.S. Mishra, and M.W. Mahoney: Scripta Mater., 2002, vol. 47, pp. 631–36.10.1016/S1359-6462(02)00257-9 ↗
15. M. Mahoney, R.S. Mishra, T. Nelson, J. Flintoff, R. Islamgaliev, and Y. Hovansky: in Friction Stir Welding and Processing, K.V. Jata, M.W. Mahoney, R.S. Mishra, and D.P. Field, eds., TMS, Warrendale, PA, 2001, pp. 183–94.
16. T.R. McNelley and M.E. McMahon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1879–87.10.1007/s11661-997-0118-2 ↗
17. N. Ridley, E. Cullen, and F.J. Humphreys: in Superplasticity and Superplastic Forming, A.K. Ghosh and T.R. Bieler, eds., TMS, Warrendale, PA, 1998, pp. 65–74.
18. R. Grimes, R.J. Dashwood, A.W. Harrison, and H.M. Flower: Mater. Sci. Technol., 2000, vol. 16, pp. 1334–39.10.1179/026708300101507190 ↗
19. R.J. Dashwood, R. Grimes, A.W. Harrison, and H.M. Flower: Mater. Sci. Forum, 2001, vols. 357–359, pp. 339–44.10.4028/www.scientific.net/MSF.357-359.339 ↗
20. Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and G. Grimes: Mater. Sci. Eng. A, 2003, vol. A351, pp. 148–53.10.1016/S0921-5093(02)00824-9 ↗
21. T.R. Chen and J.C. Huang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 53–64.10.1007/s11661-999-0195-5 ↗
22. M.T. Perez-Prado, G. Gonzalez-Doncel, O.A. Ruano, and T.R. McNelley: Acta Mater., 2001, vol. 49, pp. 2259–68.10.1016/S1359-6454(01)00128-8 ↗
23. Y.N. Wang and J.C. Haung: Scripta Mater., 2003, vol. 48, pp. 1117–22.10.1016/S1359-6462(02)00615-2 ↗
24. M.G. Zelin and A.K. Mukherjee: Acta Metall. Mater., 1995, vol. 43, pp. 2359–72.10.1016/0956-7151(94)00428-5 ↗
25. M.G. Zelin: J. Mater. Sci. Lett., 1996, vol. 15, pp. 2068–70.10.1007/BF00278624 ↗
26. K. Matsuki, T. Iwaki, M. Tokizawa, and Y. Murakami: Mater. Sci. Technol., 1991, vol. 7, pp. 513–19.10.1179/mst.1991.7.6.513 ↗
27. T. Watanabe: Metall. Trans. A, 1983, vol. 14A, pp. 531–45.10.1007/BF02643771 ↗
28. T. Watanabe, M. Yamada, S. Shima, and S. Karashima: Phil. Mag., 1979, vol. 40, pp. 667–83.10.1080/01418617908234867 ↗
29. H. Salem, A. Reynolds, and J. Lyons: Lightweight Alloys for Aerospace Applications, K. Jata, E.W. Lee, W. Frazier, and N.J. Kim, eds., TMS, Warrendale, PA, 2001, pp. 141–50.10.1002/9781118787922.ch13 ↗
30. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, and M. Calabrese: Scripta Mater., 2003, vol. 48, pp. 1451–55.10.1016/S1359-6462(03)00082-4 ↗
31. E. Nes: in Superplasticity, B. Baudelet and M. Suéry, eds., SNRS, Grenoble, France, 1985, ch. 7.
32. S.J. Hales and T.R. McNelley: Acta Mater., 1988, vol. 36, pp. 1229–39.10.1016/0001-6160(88)90275-1 ↗
33. T.G. Nieh, R. Kaibyshev, L.M. Hsiung, N. Nguyen, and J. Wadsworth: Scripta Mater., 1997, vol. 36, pp. 1011–16.10.1016/S1359-6462(96)00479-4 ↗
34. E. Nes: J. Mater. Sci., 1978, vol. 13, pp. 2052–55.10.1007/BF00552917 ↗
35. E. Nes: Met. Sci., 1979, vol. 13, pp. 211–15.10.1016/0036-9748(79)90296-5 ↗
36. R.H. Bricknell and J.W. Edington: Metall. Trans. A, 1979, vol. 10A, pp. 1257–63.10.1007/BF02811981 ↗
37. H. Kokawa, T. Watanabe, and S. Karashima: Scripta Metall., 1983, vol. 17, pp. 1155–59.10.1016/0036-9748(83)90275-2 ↗
38. V.V. Astanin, O.A. Kaibyshev, and S.N. Faizova: Scripta Metall., 1991, vol. 25, pp. 2663–68.10.1016/0956-716X(91)90135-N ↗
39. M.G. Zelin, T.R. Bieler, and A.K. Mukherjee: Metall. Trans. A, 1993, vol. 24A, pp. 1208–12.10.1007/BF02657253 ↗
40. M.G. Zelin, R.W. James, and A.K. Mukherjee: J. Mater. Sci. Lett., 1993, vol. 12, pp. 176–78.10.1007/BF00819951 ↗
41. R.S. Mishra, T.R. Bieler, and A.K. Mukherjee: Acta Mater., 1995, vol. 43, pp. 877–91.10.1016/0956-7151(94)00323-A ↗
42. L. Geng, T. Imai, J.F. Mao, M. Takagi, and C.K. Yao: Mater. Sci. Technol., 2001, vol. 17, pp. 187–94.10.1179/026708301101509845 ↗
43. M. Mabuchi and K. Higashi: Phil. Mag. Lett., 1994, vol. 70, pp. 1–6.10.1080/09500839408243864 ↗
44. M. Mabuchi and K. Higashi: Acta Mater., 1999, vol. 47, pp. 1915–22.10.1016/S1359-6454(99)00045-2 ↗
45. T.G. Nieh, P.S. Gilman, and J. Wadsworth: Scripta Metall., 1985, vol. 19, pp. 1375–78.10.1016/0036-9748(85)90070-5 ↗
46. W.J. Kim and S.H. Hong: J. Mater. Sci., 2000, vol. 35, pp. 2779–84.10.1023/A:1004730731728 ↗
47. W.J. Kim, K. Higashi, and J.K. Kim: Mater. Sci. Eng. A, 1999, vol. A260, pp. 170–77.10.1016/S0921-5093(98)00965-4 ↗
48. R. Kaibyshev, F. Musin, D. Gromov, T.G. Nieh, and D.R. Lesuer: Scripta Mater., 2002, vol. 47, pp. 569–75.10.1016/S1359-6462(02)00169-0 ↗
49. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev: Acta Mater., 1998, vol. 46, pp. 2789–2800.10.1016/S1359-6454(97)00452-7 ↗
50. K.T. Park, D.Y. Hwang, Y.K. Lee, Y.K. Kim, and D.H. Shin: Mater. Sci. Eng. A, 2003, vol. A341, pp. 273–81.10.1016/S0921-5093(02)00216-2 ↗
51. S. Lee, M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2003, vol. A342, pp. 294–301.10.1016/S0921-5093(02)00319-2 ↗
52. R.S. Mishra, R.Z. Valiev, S.X. McFadden, R.K. Islamgaliev, and A.K. Mukherjee: Phil. Mag. A, 2001, vol. 81, pp. 37–48.10.1080/014186101300012390 ↗
53. A.K. Mukherjee, R.S. Mishra, and T.R. Bieler: Mater. Sci. Forum, 1997, vols. 233–234, pp. 217–34.
54. J. Koike, K. Mabuchi, and K. Higashi: Acta Metall. Mater., 1995, vol. 43, pp. 199–206.10.1016/0956-7151(95)90275-9 ↗
55. Smithells Metals Reference Book, 7th ed., E.A. Brandes and G.B. Brook, eds., Butterworth-Heinemann, Oxford, United Kingdom, 1997, p. 41.
56. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–79.
57. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1967, vol. 13, pp. 325–90.
58. K.L. Murty, F.A. Mohamed, and J.E. Dorn: Acta Metall., 1972, vol. 20, pp. 1009–18.10.1016/0001-6160(72)90135-6 ↗
59. H. Oikawa, K. Sugawara, and S. Karashima: Trans. JIM, 1978, vol. 19, pp. 611–16.10.2320/matertrans1960.19.611 ↗
60. T.G. Nieh and J. Wadsworth: Mater. Sci. Forum, 1997, vols. 243–245, pp. 257–66.10.4028/www.scientific.net/MSF.243-245.257 ↗
61. H. Iwasaki, T. Mori, M. Mabuchi, and K. Higashi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 677–83.10.1007/s11661-998-0148-4 ↗
62. G.Q. Tong and K.C. Chan: Mater. Sci. Eng. A, 2000, vol. A286, pp. 218–24.
63. W.J. Kim and O.D. Sherby: Acta Mater., 2000, vol. 48, pp. 1763–74.10.1016/S1359-6454(00)00006-9 ↗
64. Y. Li and TG. Langdon: Acta Mater., 1999, vol. 47, pp. 3395–3403.10.1016/S1359-6454(99)00219-0 ↗
65. F.U. Enikeev: Mater. Sci. Eng. A, 2000, vol. A276, pp. 22–31.10.1016/S0921-5093(99)00522-5 ↗
66. W.J. Kim, J.H. Yeon, D.H. Shin, and S.H. Hong: Mater. Sci. Eng. A, 1999, vol. A269, pp. 142–51.10.1016/S0921-5093(99)00157-4 ↗
67. A.K. Mukherjee: in Grain Boundaries in Engineering Materials, J.L. Walter et al., eds., Claiton Publishing, Baton Rouge, LA, 1975, p. 93.
68. A. Arieli and A.K. Mukherjee: Mater. Sci. Eng., 1980, vol. 45, pp. 61–70.10.1016/0025-5416(80)90070-1 ↗
69. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–7.10.1016/0036-9748(69)90167-7 ↗
70. H. Kokawa, T. Watanabe, and S. Karashima: Phil. Mag. A, 1981, vol. 44, pp. 1239–54.10.1080/01418618108235806 ↗
71. A.F. Norman, I. Brough, and P.B. Prangnell: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1713–18.10.4028/www.scientific.net/MSF.331-337.1713 ↗
72. M. Eddahbi, T.R. McNelley, and OA. Ruano: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1093–1102.10.1007/s11661-001-0120-z ↗