Work-Hardening Behavior of the Ni-Fe Based Superalloy IN718
Source abstract
Abstract
Flow behavior of many metals and alloys in the region of uniform plastic strain is normally expressed by the simple power law relationship (σ = Kepn). However, deviations have been observed from such behavior in several fcc metallic materials with low stacking fault energy. The age-hardenable nickel-iron base superalloy IN718 is also observed not to obey the simple power law relationship either in the solution treated as well as in the different age-hardened conditions. Various flow relationships were used to obtain the best fit for the experimental data, and different relationships were identified for the different heat-treated conditions. Detailed transmission electron microscopy (TEM) examination of the tensile-tested samples, interrupted after different amounts of strain, revealed inhomogeneous deformation by planar slip in all the heat-treated conditions. Cold rolling, however, was found effective in eliminating the unusual plastic flow behavior, observed in the as-heat-treated conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. E.E. Brown, D.R. Muzyka: in Superalloys II, C.T. Sims, N.S. Stoloff, W.C. Hagel, eds., John Wiley, New York, NY, 1987, pp. 165–88
2. C.D. Desforges: in Source Book on Materials for Elevated Temperature Applications, F. Bradley, ed., ASM, Metals Park, OH, 1979, pp. 1–18
3. D.F. Paulonis, J.M. Oblak, D.S. Duvall: Trans. ASM, 1969, vol. 62, pp. 611–22
4. J.M. Oblak, D.S. Duvall, D.F. Paulonis: Mater. Sci. Eng., 1974, vol. 13, pp. 51–5610.1016/0025-5416(74)90020-2 ↗
5. H.F. Merrick: Metall. Trans., 1974, vol. 5, pp. 891–9710.1007/BF02643144 ↗
6. H.F. Merrick: Metall. Trans. A, 1976, vol. 7A, pp. 505–1410.1007/BF02643966 ↗
7. M. Clavel, A. Pineau: Metall. Trans. A, 1978, vol. 9A, pp. 471–8010.1007/BF02646402 ↗
8. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–6410.1016/0001-6160(88)90139-3 ↗
9. D.W. Worthem, I.M. Robertson, F.A. Leckie, D.F. Socie, C.J. Altstetter: Metall. Trans. A, 1990, vol. 21A, pp. 3215–2010.1007/BF02647316 ↗
10. S. Kalluri, K.B.S. Rao, G.R. Halford, M.A. McGraw: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 593–60610.7449/1994/Superalloys_1994_593_606 ↗
11. M. Sundararaman, R. Kishore, P. Mukhopadhyay: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 653–5610.1007/BF02651609 ↗
12. J. He, S. Fukuyama, K. Yokogawa: Mater. Sci. Technol., 1995, vol. 11, pp. 914–1910.1179/mst.1995.11.9.914 ↗
13. L. Xiao, D.L. Chen, M.C. Charurvedi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3477–8710.1007/s11661-004-0185-6 ↗
14. J.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268–90
15. D.C. Ludwigson: Metall. Trans., 1971, vol. 2, pp. 2825–2810.1007/BF02813258 ↗
16. P. Ludwik: Elemente der Technologischen Mechanik, Springer, Berlin, 1909, p. 3210.1007/978-3-662-40293-1 ↗
17. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537–62
18. H.W. Swift: J. Mech. Phys. Solids, 1952, vol. 1, pp. 1–1810.1016/0022-5096(52)90002-1 ↗
19. C. Crussard, B. Jaoul: Rev. Met., 1950, vol. 57, p. 58910.1051/metal/195047080589 ↗
20. P.N. Singh, V. Singh: Scripta Metall., 1996, vol. 34, pp. 1861–6510.1016/1359-6462(96)00065-6 ↗
21. P.V. Siva Prasad, S. Venugopal, S. Venkadesan: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 171–7810.1007/s11661-997-0092-8 ↗
22. B.K. Choudhary, E.I. Samuel, K. Bhanu Sankara Rao, S.L. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp. 223–3110.1179/026708301101509890 ↗
23. A. Soussan, S. Degallaix, T. Magnin: Mater. Sci. Eng. A, 1991, vol. 142A, pp. 169–7610.1016/0921-5093(91)90655-7 ↗
24. R.A. Mulford, U.F. Kocks: Acta Metall., 1979, vol. 27, pp. 1125–3410.1016/0001-6160(79)90130-5 ↗
25. R.P. Singh, R.D. Doherty: Metall. Trans. A, 1992, vol. 23A, pp. 307–1910.1007/BF02660873 ↗
26. S. Asagari, E. El-Danaf, S.R. Kalidinidi, R.D. Doherty: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1781–9510.1007/s11661-997-0109-3 ↗
27. H. Mecking: in Work Hardening in Tension and Fatigue, A.W. Thompson, ed., TMS-AMIE, Warrendale, PA, 1977, pp. 67–88
28. H. Mecking: Proc. 5th Int. Conf. on the Strength of Metals and Alloys, P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, Oxford, United Kingdom, 1980, pp. 1573–9410.1016/B978-1-4832-8412-5.50246-0 ↗
29. H. Mecking, U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–7510.1016/0001-6160(81)90112-7 ↗
30. S.K. Ray, K.G. Samuel, P. Rodriguez: Trans. Indian Inst. Met., 1992, vol. 45, pp. 257–60
31. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617–3210.1016/S1359-6454(99)00222-0 ↗
32. E. Isaac Samuel, B.K. Choudhary, K. Bhanu Sankara Rao: Scripta Mater., 2002, vol. 46, pp. 507–1210.1016/S1359-6462(02)00023-4 ↗
33. L. Xiao, D.L. Chen, M.C. Chaturvedi: Scripta Metall., 2005, vol. 52, pp. 603–0710.1016/j.scriptamat.2004.11.023 ↗
34. M. Clavel, A. Pineau: Mater. Sci. Eng. A, 1982, vol. 55A, pp. 157–7110.1016/0025-5416(82)90129-X ↗
35. H.H. Smith, D.J. Michel: Metall. Trans. A, 1986, vol. 17A, p. 37010.1007/BF02643920 ↗
36. A. Diboine, A. Pineau: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10, pp. 141–15110.1111/j.1460-2695.1987.tb01156.x ↗
37. L. Fournier, D. Delafosse, T. Magnin: Mater. Sci. Eng. A, 2001, vol. 316A, pp. 166–7310.1016/S0921-5093(01)01224-2 ↗
38. G.Y. Chin, W.F. Hosford, W.A. Backofen: Trans. TMS-AIME, 1964, vol. 230, pp. 437–49