Measuring the fracture toughness of molybdenum-0.5 pct titanium-0.1 pct zirconium and oxide dispersion-strengthened molybdenum alloys using standard and subsized bend specimens
Source abstract
Abstract
Oxide dispersion-strengthened (ODS) and molybdenum-0.5 pct titanium-0.1 pct zirconium (TZM) molybdenum have excellent creep resistance and strength at high temperatures in inert atmospheres. Fracture toughness and tensile testing was performed at temperatures between − 150 °C and 450 °C to characterize 6.35-mm-thick plate material of ODS and TZM molybdenum. A transition from low fracture-toughness values (5.8 to 29.6 MPa√m) to values >30 MPa√m is observed for TZM molybdenum in the longitudinal orientation at 100 °C and in the transverse orientation at 150 °C. These results are consistent with data reported in literature for molybdenum. A transition to low fracture-toughness values (<30 MPa√m) was not observed for longitudinal ODS molybdenum at temperatures >−150 °C, while a transition to low fracture-toughness values (12.6 to 25.4 MPa√m) was observed for the transverse orientation at room temperature. The fine spacing of La-oxide precipitates which are present in ODS molybdenum results in a transition temperature that is significantly lower than any molybdenum alloy reported to date, with upper-bound fracture-toughness values that bound the literature data. A comparison of fracture-toughness values obtained using 1T, 0.5T, and 0.25T three-point bend specimens shows that a 0.5T bend specimen could be used as a subsized geometry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. J.B. Lambert and J.J. Rausch: Non-Ferrous Alloys and Special-Purpose Materials, vol. 2, Materials Handbook, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 556–82.
2. R.E. Gold and D.L. Harrod: J. Nucl. Mater., 1979, vols. 85–85, pp. 805–15.10.1016/0022-3115(79)90359-3 ↗
3. B.L. Cox and F.W. Wiffen: J. Nucl. Mater., 1979, vols. 85–85, pp. 901–05.10.1016/0022-3115(79)90375-1 ↗
4. J.A. Shields, P. Lipetzky, and A.J. Mueller: Proc. 15th Int. Plansee Seminar, Vol. 1, Metallwerk Plansee, Reutte, Austria, 2001; available as B-T-3326, DOE/OSTI, Oak Ridge, TN, Apr. 4, 2001, pp. 1–13.
5. M. Scibetta, R. Chaouadi, and J.L. Puzzolante: J. Nucl. Mater., 2000, vols. 283–287, pp. 455–60.10.1016/S0022-3115(00)00266-X ↗
6. A.Y. Koval, A.D. Vasilev, and S.A. Firstov: Int. J. Refractory Met. Hard Mater., 1997, vol. 15, pp. 223–26.10.1016/S0263-4368(97)00009-7 ↗
7. M. Danylenko: in Modeling the Mechanical Response of Structural Materials, E.M. Taleff and R.K. Mahidhara, eds., TMS, Warrendale, PA, 1997, pp. 229–35.
8. M. Rödig, H. Derz, G. Pott, and B. Werner: Proc. 14th Int. Plansee Seminar, Vol. 1, G. Kneringer, P. Rödhammer, and P. Wilharitz, eds, Metallwerk Plansee, Reutte, Austria, 1997, pp. 781–91.
9. D.L. Chen, B. Weiss, R. Stickler, M. Witwer, G. Leichtfried, and H. Hödl: High Temp. Mater. Processes, 1994, vol. 13, pp. 75–85.10.1515/HTMP.1994.13.1.75 ↗
10. D.L. Chen, B. Weiss, R. Stickler, M. Witwer, and G. Leichtfried: Proc. 13th Int. Plansee Seminar, Vol. 1, H. Bildstein and R. Eck, eds., Metallwerk Plansee, Reutte, Austria, 1993, pp. 621–31.
11. M. Semchyshen and R.Q. Barr: J. Less-Common Met., 1966, vol. 11, pp. 1–13.10.1016/0022-5088(66)90052-X ↗
12. C.W. Marschall and F.C. Holden: High Temperature Refractory Metals, Gordon-Breach Science Publishers, New York, NY, 1964, pp. 129–59.
13. H.E. Romine: “Fracture Toughness at Room Temperature of Some Refractory Metals Based on Tungsten, Molybdenum or Columbium Which Are Being Considered for Use in the Nozzles of Large Solid Propellant Rockets,” NWL Report No. 1873, U.S. Naval Weapons Laboratory, Dahlgren, VA, 1963.
14. Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod. and Wire, ASTM B386-95, ASTM, Philadelphia, PA, 1995.
15. R. Bianco, R.W. Buckman, Jr., and C.B. Geller: U.S. Patent 5,868,876, Feb. 9, 1999.
16. A.J. Mueller, J.A. Shields, and R.W. Buckman: Proc. 15th Int. Plansee Seminar. Vol. 1, Metallwerk Plansee, Reutte, Austria, 2001; available as B-T-3325, DOE/OSTI, Oak Ridge, TN, Feb. 8, 2001, pp. 1–13.
17. R. Bianco and R.W. Buckman, Jr.: 1995 Spring ASM/TMS Symp. on High Temperature Materials, GE CR&D Center, Schenectady, NY May 19, 1995; available as WAPD-T-3073, DOE/OSTI, Oak Ridge, TN, 1995.
18. R. Bianco and R.W. Buckman, Jr.: in Molybdenum and Molybdenum Alloys, A. Crowson, E.S. Chen, J.A. Shields, and P.R. Subramanian, eds., TMS, Warrendale, PA, 1998, pp. 125–42.
19. Standard Terminology Relating to Fatigue and Fracture Testing, ASTM E1823-96, ASTM, Philadelphia, PA, 1996.
20. Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-01, ASTM, Philadelphia, PA, 2001.
21. Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-90, ASTM, Philadelphia, PA, 1997.
22. Standard Test Method for Tension Testing of Metallic Materials, ASTM E8-00, ASTM, Philadelphia, PA, 2000.
23. Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, ASTM E21-98, ASTM, Philadelphia, PA, 1998.
24. B.V. Cockeram: Surf. Coatings Technol., 1998, vols 108–109, pp. 377–84.10.1016/S0257-8972(98)00600-8 ↗
25. B.V. Cockeram: Metall. Mater. Trans., 2002, vol. 33A, pp. 33–56.10.1007/s11661-002-0004-x ↗
26. A. Lawley, J. Van den Sype, and R. Maddin: J. Inst. Met., 1962–1963, vol. 91, pp. 23–27.
27. G.W. Brock: Trans. TMS-AIME, 1961, vol. 221, pp. 1055–62.
28. K. Furuya and J. Moteff: J. Nucl. Mater., 1981, vol. 99, pp. 306–16.10.1016/0022-3115(81)90198-7 ↗
29. I.V. Gorynin, V.A. Ignatov, V.V. Rybin, S.A. Fabritsiev, V.A. Kazakov, V.P. Chakin, V.A. Tsykanov, V.R. Barabash, and Y.G. Prokofyev: J. Nucl. Mater., 1992, vols. 191–194, pp. 421–42.10.1016/0022-3115(92)90799-Q ↗
30. B.N. Singh, J.H. Evans, A. Horsewell, P. Toft, and G.V. Müller: J. Nucl. Mater., 1998, vols. 258–263, pp. 865–87.10.1016/S0022-3115(98)00259-1 ↗
31. B.N. Singh, A. Horsewell, P. Toft, and J.H. Evans: J. Nucl. Mater., 1994, vols. 212–215, pp. 1292–97.10.1016/0022-3115(94)91038-3 ↗
32. K. Abe, T. Takeuchi, M. Kikuchi, and S. Morozumi: J. Nucl. Mater., 1981, vol. 99, pp. 25–37.10.1016/0022-3115(81)90135-5 ↗
33. S. Suresh and J.R. Brockenbrough: Acta Metall., 1988, vol. 36, pp. 1455–70.10.1016/0001-6160(88)90213-1 ↗
34. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 2nd ed., John Wiley & Sons, New York, NY, 1983, pp. 269–348.
35. K.S. Chan: Metall. Trans. A, 1989, vol. 20A, pp. 155–64.10.1007/BF02647502 ↗
36. K.S. Chan: Metall. Trans. A, 1989, vol. 20A, pp. 2337–44.10.1007/BF02666668 ↗