Alloy development for the enhanced stability of Ω precipitates in Al-Cu-Mg-Ag alloys
Source abstract
Abstract
The coarsening resistance and thermal stability of several Ω plate-dominated microstructures were controlled through altering the chemistry and thermomechanical processing of various Al-Cu-Mg-Ag alloys. Quantitative comparisons of Ω nucleation density, particle size, and thermal stability were used to illustrate the effects of alloy composition and processing conditions. The long-term stability of Ω plates was found to coincide with relatively high levels of silver and moderate magnesium additions, with the latter limiting the competition for solute with S-phase precipitation. This analysis revealed that certain microstructures initially dominated by Ω precipitation were found to remain stable through long-term isothermal and double-aging heat treatments, which represents significant improvement over the previous generation of Al-Cu-Mg-Ag alloys, in which Ω plates dissolved sacrificially after long aging times. The quantitative precipitate data, in conjunction with a thermodynamic database for the aluminum-rich corner of the Al-Cu-Mg-Ag quaternary system, were used to estimate the chemistry of the α/Ω-interphase boundary. These calculations suggest that silver is the limiting species at the α/Ω interfacial layer and that Ω plates form with varying interfacial chemistries during the early stages of artificial aging, which is directly related to the overall stability of certain plates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. H.K. Hardy: J. Inst. Metals, 1954–55, vol. 83, pp. 17–34.
2. S. Ozbilen and H.M. Flower: Acta Metall., 1989, vol. 37, pp. 2993–3000.10.1016/0001-6160(89)90335-0 ↗
3. D.L. Gilmore and E.A. Starke, Jr.: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1399–415.10.1007/s11661-997-0203-6 ↗
4. R.N. Wilson: J. Inst. Metals, 1969, vol. 97, pp. 80–88.
5. G.B. Winkelman, K. Raviprasad, and B.C. Muddle: Mater. Sci. Forum. 2002, vol. 396–402, pp. 1037–42.10.4028/www.scientific.net/MSF.396-402.1037 ↗
6. Y.A. Bagaryatskii: Zhurnal Tekhnicheskoi Fiziki, 1948, vol. 18, pp. 827–30.
7. Y.A. Bagaryatskii: Dokl. Akad. Nauk SSSR, 1952, vol. 87, pp. 579–80.
8. H.M. Flower and P.J. Gregson: Mater. Sci. Technol., 1987, vol. 3, pp. 81–90.10.1179/mst.1987.3.2.81 ↗
9. G.C. Weatherly: Ph.D. Dissertation, Cambridge University, Cambridge, England, 1966.
10. V. Radmilovic, G. Thomas, G.J. Shiflet, and E.A. Starke, Jr.: Scr. Met., 1989, vol. 23, pp. 1141–46.10.1016/0036-9748(89)90315-3 ↗
11. A. Garg, Y.C. Chang, and J.M. Howe: Scr. Met., 1990, vol. 24, pp. 677–80.10.1016/0956-716X(90)90222-3 ↗
12. R.W. Fonda, W.A. Cassada, and G.J. Shiflet: Acta Metall. Mater., 1992, vol. 40, pp. 2539–46.10.1016/0956-7151(92)90323-7 ↗
13. B.M. Gable, A.W. Zhu, G.J. Shiflet, and E.A. Starke, Jr.: in Materials Design Approaches and Experiences, J.-C. Zhao, M. Fahrmann, and T.M. Pollock, eds., TMS Publications, Warrendale, PA, 2001, pp. 111–22.
14. B.T. Sofyan, I.J. Polmear, and S.P. Ringer: Mater. Sci. Forum, 2002, vol. 396–402, pp. 613–18.10.4028/www.scientific.net/MSF.396-402.613 ↗
15. N. Unlu, B.M. Gable, G.J. Shiflet, and E.A. Starke, Jr.: Mater. Sci. Forum, 2002, vol. 396–402, pp. 801–06.10.4028/www.scientific.net/MSF.396-402.801 ↗
16. N. Unlu, B.M. Gable, G.J. Shiflet, and E.A. Starke, Jr.: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2757–69.10.1007/s11661-003-0177-y ↗
17. N. Gao, L. Davin, S. Wang, A. Cerezo, and M.J. Starink: Mater. Sci. Forum, 2002, vol. 396–402, pp. 923–28.10.4028/www.scientific.net/MSF.396-402.923 ↗
18. B.C. Muddle and I.J. Polmear: Acta Metall., 1989, vol. 37, pp. 777–89.10.1016/0001-6160(89)90005-9 ↗
19. I.J. Polmear: Trans. TMS-AIME, 1964, vol. 230, pp. 1331–34.
20. I.J. Polmear and J.T. Vietz: J. Inst. Metals., 1966, vol. 94, pp. 410–16.
21. J.H. Auld and J.T. Vietz: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, England, 1969, pp. 77–79.
22. R.J. Chester and I.J. Polmear: The Metallurgy of Light Metals, Institute of Metals, London, England, 1983, pp. 69–75.
23. J.T. Vietz and I.J. Polmear: J. Inst. Metals, 1966, vol. 94, pp. 410–16.
24. J.H. Auld: Acta Crystallogr., 1972, vol. A28, p. S98.
25. S. Kerry and V.D. Scott: Metals Sci., 1984, vol. 18, pp. 289–94.10.1179/030634584790420069 ↗
26. J.H. Auld: Mater. Sci. Technol., 1986, vol. 2, pp. 784–87.10.1179/mst.1986.2.8.784 ↗
27. V.D. Scott, S. Kerry, and R.L. Trumper: Mater. Sci. Technol., 1987, vol. 3, pp. 827–35.10.1179/mst.1987.3.10.827 ↗
28. K.M. Knowles and W.M. Stobbs: Acta Crystallogr. Sect B.: Struct Sci., 1988, vol. B44, pp. 207–27.10.1107/S0108768187012308 ↗
29. A. Garg and J.M. Howe: Acta Metall., 1991, vol. 39, pp. 1939–46.10.1016/0956-7151(91)90162-T ↗
30. D. Vaughn and J.M. Silcock: Phys. Status Solidi, 1967, vol. 20, pp. 725–41.10.1002/pssb.19670200235 ↗
31. A.W. Zhu, B.M. Gable, G.J. Shiflet, and E.A. Starke, Jr.: Adv. Eng. Mat., 2002, vol. 4, pp. 839–46.10.1002/1527-2648(20021105)4:11<839::AID-ADEM839>3.0.CO;2-8 ↗
32. I.J. Polmear, G. Pons, Y. Barbaux, H. Octor, C. Sanchez, A.J. Morton, W.E. Borbidge, and S. Rogers: Mater. Sci. Technol., 1999, vol. 15, pp. 861–68.10.1179/026708399101506599 ↗
33. A. Zhu, E.A. Starke, and G.J. Shiflet: Scripta Mat., 2005, vol. 53, pp. 35–40.10.1016/j.scriptamat.2005.03.023 ↗
34. L. Reich, M. Murayama, and K. Hono: Acta Mater., 1998, vol. 46, pp. 6053–62.10.1016/S1359-6454(98)00280-8 ↗
35. C.R. Hutchinson, X. Fan, S.J. Pennycook, and G.J. Shiflet: Acta Metall., 2001, vol. 49, pp. 2827–41.
36. J.M. Howe: Philos. Mag. Lett., 1994, vol. 70, pp. 111–20.10.1080/09500839408240963 ↗
37. S.P. Ringer, W. Yeung, B.C. Muddle, and I.J. Polmear: Acta Metall., 1994, vol. 42, pp. 1715–25.10.1016/0956-7151(94)90381-6 ↗
38. S.P. Ringer, B.C. Muddle, and I.J. Polmear: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1659–71.10.1007/BF02670753 ↗
39. S. Abis, P. Mengucci, and G. Riontino: Philos. Mag. A, 1994, vol. 70, pp. 851–68.10.1080/01418619408242935 ↗
40. Y.S. Lee, S.P. Ringer, B.C. Muddle, and I.J. Polmear: in Al Alloys—Their Physical and Mechanical Properties, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Trans Tech Publications, Enfield, NH, 1994, pp. 582–87.
41. X. Gao, J.F. Nie, and B.C. Muddle: Mater. Sci. Forum, 1996, vol. 217–222, pp. 1251–56.10.4028/www.scientific.net/MSF.217-222.1251 ↗
42. B.M. Gable, G.J. Shiflet, and E.A. Starke, Jr.: Scr. Mater., 2004, vol. 50, pp. 149–53.10.1016/j.scriptamat.2003.09.004 ↗
43. A.K. Mukhopadhyay: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1693–704.10.1007/s11661-999-0169-7 ↗
44. G.J. Shiflet, M.A. Mangan, and W.G. Meng: Interface Sci., 1998, vol. 6, pp. 133–54.10.1023/A:1008624822480 ↗
45. W.A. Cassada, G.J. Shiflet, and E.A. Starke, Jr.: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 299–306.10.1007/BF02656799 ↗
46. S.P. Ringer, B.C. Muddle, and I.J. Polmear: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1659–71.10.1007/BF02670753 ↗
47. B.M. Gable, A.W. Zhu, A.A. Csontos, and E.A. Starke, Jr.: J. Light Met., 2001, vol. 1, pp. 1–14.10.1016/S1471-5317(00)00002-X ↗
48. A.W. Zhu and E.A. Starke, Jr.: Acta Metall., 2001, vol. 49, pp. 3063–69.
49. Wah Chang Analytical Services: Albany, OR, available at: www.wahchang.com.
50. P.M. Kelly, A. Jostens, R.G. Blake, and J.G. Napier: Phys. Status Solidi A, 1975, vol. 31, pp. 771–80.10.1002/pssa.2210310251 ↗
51. M. Otten: Philips Electron Optics, Applications Laboratory, 1993, Eindhoven, The Netherlands.
52. S.A. Saltykov: Stereometrische Metallographie, Deutcher Verlag fur Grundstoffindustrie, Leipzig, Federal Republic of Germany, 1974.
53. W.A. Cassada: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 1987.
54. M.A. Qian: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1283–86.10.1007/s11661-002-0230-2 ↗