High-strain-rate behavior of low-alloy multiphase aluminum- and silicon-based transformation-induced plasticity steels
Source abstract
Abstract
High-strength, low-alloy transformation-induced plasticity (TRIP) steels are advanced multiphase steel grades that combine high-strength levels with an excellent ductility, making them ideally suited for application in crash-relevant parts of automotive car bodies. The enhanced plastic hardening and deformability are due to a complex interaction between the microstructural phases and to the transformation of metastable austenite to martensite during plastic deformation. During high-strain-rate loading, not only the material but also the transformation will be influenced by adiabatic heating. The impact-dynamic properties of CMnAl- and CMnSi-TRIP steels were determined in the range of 500 to 2000 s−1 using a split Hopkinson tensile bar (SHTB) setup. Bake-hardening treatments were applied to study the effect of strain aging. The experiments show that strain-rate hardening is superior to thermal softening: yield stresses, deformation, and energy dissipation increase with the strain rate. Phenomenological material models were investigated to describe the strain-rate and temperature-dependent behavior of TRIP steels. Both the Johnson-Cook model and an extended version of the Ludwig model were found to give good agreement with the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. A.N. Vasilakos, J. Ohlert, K. Giasla, G.N. Haidemenopoulos, and W. Bleck: Steel Res., 2002, vol. 73 (6–7), pp. 249–52.10.1002/srin.200200204 ↗
2. V.F. Zackay, E.R. Parker, D. Fahr, and R. Busch: Trans. ASM, 1967, vol. 60, pp. 252–59.
3. O. Matsumura and O. Sakuma: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
4. Y. Sakuma, O. Matsumura, and H. Takechi: Metall. Trans. A, 1991, vol. 22A, pp. 489–98.10.1007/BF02656816 ↗
5. B.C. De Cooman, L. Samek, J. Mahieu, J. Van Slycken, P. Verleysen, J. Degrieck, L. Lin, L. Wang, X. Cheng Wei, and S. Peng: Proc. 2003 Fall Meeting of TMS and 45th ISS Mechanical Working and Steel Processing Conf., Vancouver, BC, Canada, 2003.
6. J. Mahieu: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
7. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden, and J. Van Humbeeck: Scripta Mater., 2001, vol. 44, pp. 885–92.10.1016/S1359-6462(00)00697-7 ↗
8. A.K. Pickett, T. Pyttel, F. Payen, F. Lauro, N. Petrinic, H. Werner, and J. Christlein: Int. J. Impact Eng., 2004, vol. 30, pp. 853–72.10.1016/j.ijimpeng.2004.04.004 ↗
9. P.J. Jacques, J. Ladriere, and F. Delannay: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2759–68.10.1007/s11661-001-1027-4 ↗
10. A. Itami, M. Takahashi, and K. Ushioda: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1121–27.10.2355/isijinternational.35.1121 ↗
11. L. Zhao, N.H. van Dijk, E. Brück, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng., A, 2001, vol. 313, pp. 145–52.10.1016/S0921-5093(01)00965-0 ↗
12. E. Girault, P. Jacques, P. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, and F. Delannay: Mater. Characterization, 1998, vol. 40, pp. 111–18.10.1016/S1044-5803(97)00154-X ↗
13. H. Kolsky: Proc. Phys. Soc. London Sect. B, 1949, vol. 62, pp. 676–700.10.1088/0370-1301/62/11/302 ↗
14. P. Verleysen and J. Degrieck: Int. J. Impact Eng., 2004, vol. 30, pp. 239–53.10.1016/S0734-743X(03)00069-1 ↗
15. K.P. Staudhammer and L.E. Murr: Mater. Sci. Eng., 1980, vol. 44, pp. 97–113.10.1016/0025-5416(80)90235-9 ↗
16. L.E. Murr: in Materials at High Strain Rates, T.Z. Blazynski, ed., Elsevier Applied Science Publishers Ltd., New York, NY, 1987, pp. 1–46.
17. W.S. Lee and C.F. Lin: Mater. Sci. Technol., 2002, vol. 18, pp. 869–76.10.1179/026708302225004711 ↗
18. A.S. Khan and R. Liang: Int. J. Plast., 1999, vol. 15, pp. 1089–109.10.1016/S0749-6419(99)00030-3 ↗
19. J. Mahieu: Ph.D. Thesis, Ghent University, Ghent, 2004.
20. A. Mark, D. Boyd, and E. Essadiqi: Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications Proc., Winterpark, CO, 2004, pp. 307–13.
21. G.R. Johnson and W.H. Cook: Proc. 7th Int. Symp. Ballistics, The Hague, 1983, pp. 541–47.
22. H. Zhao: Mater. Sci. Eng., A, 1997, vol. 230, pp. 95–99.10.1016/S0921-5093(97)00024-5 ↗