Microstructural and compositional evolution of compound layers during gaseous nitrocarburizing
Source abstract
Abstract
Compound layers developed at 848 K during gaseous nitrocarburizing of iron and iron-carbon specimens were investigated for several combinations of N and C activities imposed at the specimen surface by gas mixtures of NH3, N2, CO2, and CO. The microstructural evolution of the compound layer was studied by light microscopy and by X-ray diffraction analysis. Composition-depth profiles were determined by electron probe (X-ray) microanalysis. Layer growth kinetics was investigated by layer thickness measurements. The influence of the N and C activities on the microstructural and compositional evolution and the growth kinetics of the compound layers formed is discussed for the iron substrate. The results indicate that the microstructure is governed by a fast C and a slow N absorption at the surface in an early stage of gaseous nitrocarburizing. The influence of carbon in the substrate on the microstructural and compositional evolutions and on the growth kinetics was evaluated from comparing the results obtained for a normalized Fe-0.8C alloy with those for iron under identical nitrocarburizing conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metallurgical and Alloy Processes · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Source Book on Nitriding, ASM, Metals Park, OH, 1977.
2. A. Wells: Ph.D. Thesis, The University of Liverpool, Liverpool, 1982.
3. A. Wells and T. Bell: Heat Treatment of Metals, 1983, vol. 2, pp. 39–44.
4. M.A.J. Somers and E.J. Mittemeijer: Surf. Eng., 1987, vol. 3, pp. 123–37.10.1179/sur.1987.3.2.123 ↗
5. M.A.J. Somers, P.F. Colijn, W.G. Sloof, and E.J. Mittemeijer: Z. Metallkd., 1990, vol. 81, pp. 33–43.
6. J. Slycke and L. Sproge: Surf. Eng., 1989, vol. 5, pp. 125–40.10.1179/sur.1989.5.2.125 ↗
7. L. Sproge and J. Slycke: Mater. Sci. Forum, 1992, vols. 102–104, pp. 229–42.10.4028/www.scientific.net/MSF.102-104.229 ↗
8. E.J. Mittemeijer and J. Slycke: Härterei-Tech. Mitt., 1995, vol. 50, pp. 114–25.
9. E.J. Mittemeijer and J. Slycke: Surf. Eng., 1996, vol. 12, pp. 152–62.10.1179/sur.1996.12.2.152 ↗
10. M.A.J. Somers, B.J. Kooi, L. Maldzinski, E.J. Mittemeijer, A.A. van der Horst, A.M. van der Kraan, and N.M. van der Pers: Acta Mater., 1997, vol. 45, pp. 2013–25.10.1016/S1359-6454(96)00307-2 ↗
11. E.J. Mittemeijer and M.A.J. Somers: Surf. Eng., 1997, vol. 13, pp. 483–97.10.1179/sur.1997.13.6.483 ↗
12. M.A.J. Somers and E.J. Mittemeijer: Heat Treating, Proc. 17th Conf., D.L. Milam, D.A. Poteet, G.D. Pfaffmann, V. Rudner, A. Muehlbauer, and W.B. Albert, eds., ASM INTERNATIONAL, Metals Park, OH, 1998, pp. 321–30.
13. H.J. Grabke: Arch. Eisenhüttenwes., 1975, vol. 46, pp. 75–81.10.1002/srin.197503989 ↗
14. F.K. Naumann and G.L. Langenscheid: Arch. Eisenhuttenwes., 1965, vol. 36, pp. 583–90.
15. E. Lehrer: Z. Elektrochem., 1930, vol. 36, pp. 383–92.
16. Hong Du: J. Phase Equilibria, 1993, vol. 14, pp. 682–93.10.1007/BF02667880 ↗
17. J. Kunze: Harterei-Tech. Mitt., 1996, vol. 51, pp. 348–55.
18. A. Wells: J. Mater. Sci., 1985, vol. 20, pp. 2439–45.10.1007/BF00556072 ↗
19. D. Schalkoord: Master’s Thesis, Delft University of Technology, Delft, 1973.
20. M.A.J. Somers, N.M. van der Pers, D. Schalkoord, and E.J. Mittemeijer: Metall. Trans. A, 1989, vol. 20A, pp. 1533–39.10.1007/BF02665509 ↗
21. G.F. Bastin and H.J.M. Heijligers: Scanning, 1990, vol. 12, pp. 225–36.10.1002/sca.4950120408 ↗
22. M.A.J. Somers and E.J. Mittemeijer: Mater. Sci. Forum, 1992, vols. 102–104, pp. 223–28.10.4028/www.scientific.net/MSF.102-104.223 ↗
23. M.A.J. Somers and E.J. Mittemeijer: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 57–74.10.1007/BF02669794 ↗
24. Hong Du, N. Lange, and J. Agren: Surf. Eng., 1995, vol. 11, pp. 301–7.10.1179/sur.1995.11.4.301 ↗
25. Hong Du and J. Agren: Z Metallkd., 1995, vol. 86, pp. 522–29.
26. B.J. Kooi, M.A.J. Somers, and E.J. Mittemeijer: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1055–61 and 1063–71.10.1007/BF02649774 ↗
27. L. Torchane, P. Bilger, J. Dulcy, and M. Gantois: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1823–35.10.1007/BF02651932 ↗
28. Hong Du and J. Agren: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1073–80.
29. A. Engstrom: Ph.D. Thesis, Royal Institute of Technology, Stockholm, 1996.
30. L. Sproge, J. Slycke, and J. Agren: Scand. J. Metall., 1988, vol. 17, pp. 122–26.