The Distribution of Grain Boundary Planes in Interstitial Free Steel
Source abstract
Abstract
The grain boundary character distribution in a commercial IF steel has been measured as a function of lattice misorientation and boundary plane orientation. The grain boundary plane distribution revealed a relatively low anisotropy with a tendency for grain boundaries to terminate on low index planes having relatively low surface energy and large interplanar spacings. Although the most common grain boundary plane orientation was (111), grain boundaries terminated on higher index planes were sometimes found. For instance, at a misorientation angle of 60 deg about [111], symmetric {112} tilt boundaries were far more populous than [111] twist boundaries. The current observation revealed an inverse relationship between the measured populations and the previously reported grain boundary energies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M.D. Nave, M.R. Barnett, and H. Beladi: ISIJ Int., 2004, vol. 44, pp. 1072–78.10.2355/isijinternational.44.1072 ↗
2. E.O. Hall: Proc. Phys. Soc. Lond., 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
3. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
4. R.W.K. Honeycombe and H.K.D.H. Bhadeshia: Steels: Microstructures and Properties, 2nd ed., Arnold, London, 1995.
5. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
6. G.S. Rohrer, D.M. Saylor, B. El Dasher, B.L. Adams, A.D. Rollett, and P. Wynblatt: Z. Metallkd, 2004, vol. 95, pp. 197–214.10.3139/146.017934 ↗
7. S.J. Dillon and G.S. Rohrer: J. Am. Ceram. Soc., 2009, vol. 92, pp. 1580–85.10.1111/j.1551-2916.2009.03064.x ↗
8. J. Li, S.J. Dillon, G.S. Rohrer: Acta Mater., 2009, vol. 57, pp. 4304–11.10.1016/j.actamat.2009.06.004 ↗
9. D.M. Saylor, B.S. El Dasher, A.D. Rollett, and G.S. Rohrer: Acta Mater. 2004, vol. 52, pp. 3649–55.10.1016/j.actamat.2004.04.018 ↗
10. D.M. Saylor, B.S. El Dasher, T. Sano, and G.S. Rohrer: J. Am. Ceram Soc. 2004, vol. 87, pp. 670–76.10.1111/j.1551-2916.2004.00670.x ↗
11. D.M. Saylor, B.S. El Dasher, Y. Pang, H.M. Miller, P. Wynblatt, A.D. Rollett, and G.S. Rohrer: J. Am. Ceram. Soc., 2004, vol. 87, pp. 724–26.10.1111/j.1551-2916.2004.00724.x ↗
12. D.M. Saylor, A. Morawiec, and G.S. Rohrer: Acta Mater., 2003, vol. 51, pp. 3675–86.10.1016/S1359-6454(03)00182-4 ↗
13. T.A. Bennett, C.S. Kim, G.S. Rohrer, and A.D. Rollett: Mater. Sci. Forum, 2004, vols. 467–470, pp. 1057–62.
14. H.K. Kim, W.S. Ko, H.J. Lee, S.G. Kim, and B.J. Lee: Scripta Mater., 2011, vol. 64, pp. 1152–55.10.1016/j.scriptamat.2011.03.020 ↗
15. A. Morawiec, J.A. Szpunar, and D.C. Hinz: Acta Metall. Mater., 1993, vol. 41, pp. 2825–32.10.1016/0956-7151(93)90097-C ↗
16. H. Beladi, P. Cizek, and P.D. Hodgson: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1175–89.10.1007/s11661-009-9799-z ↗
17. V. Randle, G.S. Rohrer, H.M. Miller, M. Coleman, and G.T. Owen: Acta Mater., 2008, vol. 56, pp. 2363–73.10.1016/j.actamat.2008.01.039 ↗
18. A. Morawiec: J. Appl. Crystallogr., 2011, vol. 44, pp. 1152–55.10.1107/S002188981104310X ↗
19. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing Company, Florida, 1982, pp. 274–366.
20. D.A. Curry: Metal Sci., 1980, vol. 14, pp. 319–26.10.1179/030634580790426292 ↗
21. B. Gale, R.A. Hunt, and M. McLean: Philos. Mag., 1972, vol. 25, pp. 947–60.10.1080/14786437208229315 ↗
22. P.B. Mee: Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 2155–61.
23. G.S. Rohrer, V. Randle, C.S. Kim, and Y. Hu: Acta Mater., 2006, vol. 54, pp. 4489–4502.10.1016/j.actamat.2006.05.035 ↗
24. D. Wolf and S. Phillpot: Mater. Sci. Eng. A, 1989, vol. 107, pp. 3–14.10.1016/0921-5093(89)90370-5 ↗
25. D. Wolf: J. Mater. Res., 1990, vol. 5, pp. 1708–30.10.1557/JMR.1990.1708 ↗
26. A.P. Sutton: Prog. Mater. Sci., 1992, vol. 36, pp. 167–202.10.1016/0079-6425(92)90008-U ↗
27. C.G. Dunn, F.W. Daniels, and M.J. Bolton: J. Met. Trans. AIME, 1950, vol. 188, pp. 368–69.
28. P.J. Goodhew, T.Y. Tan, and R.W. Balluffi: Acta Metall., 1978, vol. 35, pp. 557–67.10.1016/0001-6160(78)90108-6 ↗