journal article·2014-03

On Various Aspects of Decomposition of Austenite in a High-Silicon Steel During Quenching and Partitioning

Mahesh Chandra Somani, D. A. Porter, L. P. Karjalainen, R. D. K. Misra

Publisher page

Abstract

Using a Gleeble thermomechanical simulator, a high-silicon steel (Fe-0.2C-1.5Si-2.0Mn-0.6Cr) was laboratory hot-rolled, re-austenitized, quenched into the Ms–Mf range, retaining 15 to 40 pct austenite at the quench stop temperature (TQ), and annealed for 10 to 1000 seconds at or above TQ in order to better understand the mechanisms operating during partitioning. Dilatometer measurements, transmission electron microscopy, and calculations showed that besides carbon partitioning, isothermal martensite and bainite form at the partitioning temperature. While isothermal martensite formation starts almost immediately after quenching with the rate of volume expansion dropping all the time, the beginning of bainite formation is marked by a sudden increase in the rate of expansion. The extent of its formation depends on the partitioning temperature following TTT diagram predictions. At the highest partitioning temperatures martensite tempering competes with partitioning. Small fractions of bainite and high-carbon martensite formed on cooling from the partitioning temperature. The average carbon content of the austenite retained at room temperature as determined from XRD measurements was close to the carbon content estimated from the Ms temperature of the martensite formed during the final cooling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M.C. Somani, L.P. Karjalainen, D.A. Porter, and R.D.K. Misra: Mater. Sci. Forum, 2012, vols. 706-709, pp. 2824-29.10.4028/www.scientific.net/MSF.706-709.2824 ↗
2. M.C. Somani, D.A. Porter, L.P. Karjalainen, and R.D.K. Misra: Proceedings of the 3rd International Conference on Thermo-Mechanical Simulation and Processing of Steels (SimPro’12), Ranchi, India, B.K. Jha, S. Srikanth, Anjana Deva, S. Mitra Mazumdar, D. karmakar, and S. Varadarajan, eds., Viva Books, New Delhi, 2012, pp. 295–306.
3. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219-37.10.1016/j.cossms.2004.09.003 ↗
4. M.J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, and J. Sietsma: Acta Mater., 2011, vol. 59, pp. 6059-68.10.1016/j.actamat.2011.06.014 ↗
5. E. De Moor, S. Lacroix, A.J. Clarke, J. Penning, and J.G. Speer: Metall. Mater. Trans. A, 2008, vol. 39A, p. 2586-95.10.1007/s11661-008-9609-z ↗
6. J.G. Speer, F.C.R. Assunção, D.K. Matlock, and D.V. Edmonds: Mater. Res., 2005, vol. 8, no. 4, pp. 417-23.10.1590/S1516-14392005000400010 ↗
7. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56 (2008), pp. 16-22.10.1016/j.actamat.2007.08.051 ↗
8. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vols. 438-440, pp. 25-34.10.1016/j.msea.2006.02.133 ↗
9. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611-22.10.1016/S1359-6454(03)00059-4 ↗
10. E. De Moor, S. Lacroix, L. Samek, J. Penning, and J.G. Speer: Proceedings of the 3rd International Conference on Advanced Structural Steels (ICASS), Gyeongju, Korea, 2006, pp. 873–78.
11. J.G. Speer, E. De Moor, K.O. Findley, D.K. Matlock, B.C. De Cooman, and D.V.Edmonds: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3591-601.10.1007/s11661-011-0869-7 ↗
12. H.Y. Li, X.W. Lu, W.J. Li, and X.J. Jin: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1284-300.10.1007/s11661-010-0184-8 ↗
13. D. Kim, J.G. Speer, and B.C. De Cooman: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1575–585.10.1007/s11661-010-0557-z ↗
14. Donghwi Kim, Seok-Jae Lee, and Bruno C. De Cooman: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4967-83.10.1007/s11661-012-1338-7 ↗
15. M.J. Santofimia, L. Zhao, and J. Sietsma: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3620-26.10.1007/s11661-011-0706-z ↗
16. M.J. Santofimia, L. Zhao, and J.Sietsma, Mater. Sci. Forum, 2012, vols. 706-709, pp. 2290-95.10.4028/www.scientific.net/MSF.706-709.2290 ↗
17. M.J. Santofimia, J.G. Speer, A.J. Clarke, L. Zhao, and J. Sietsma: Acta Mater., 2009, vol. 57, pp. 4548-57.10.1016/j.actamat.2009.06.024 ↗
18. S.M.C. Van Bohemen, M.J. Santofimia, and J. Sietsma: Scripta Mater., 2008, vol. 58, pp. 488-91.10.1016/j.scriptamat.2007.10.045 ↗
19. S.M.C. Van Bohemen and J. Sietsma: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1059-68.10.1007/s11661-009-9796-2 ↗
20. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗
21. P.P. Suikkanen, A-J. Ristola, A.M. Hirvi, P. Sahu, M.C. Somani, D.A. Porter, and L.P. Karjalainen, ISIJ Int., 2013, vol. 53, pp. 337-46.10.2355/isijinternational.53.337 ↗
22. D.V. Edmonds, K. He, M.K. Miller, F.C. Rizzo, A. Clarke, D.K. Matlock, and J.G. Speer, Mater. Sci. Forum, 2007, vols. 539-543, pp. 4819-25.10.4028/www.scientific.net/MSF.539-543.4819 ↗
23. L. Cheng, A. Bottger, Th.H. de Keijser, and E.J. Mittemeijer: Scripta Metall. Mater., 1990, vol. 24, pp. 509-14.10.1016/0956-716X(90)90192-J ↗
24. C. Garcia de Andres, F.G. Caballero, C. Capdevila, and L.F. Alvarez: Mater. Charact., 2002, vol. 48, pp. 101-11.10.1016/S1044-5803(02)00259-0 ↗
25. G.A. Thomas, J.G. Speer, and D.K. Matlock: Proceedings of the International Conference on New Developments in Advanced High-Strength Sheet Steels, Association for Iron & Steel Technology, Warrendale, PA, 2008, pp. 227–36.
26. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7A, pp. 41-48.10.1007/BF02644037 ↗
27. J. Cornide, C. Garcia-Mateo, C. Capdevila, and F.G. Caballero: J. Alloys and Compounds, 2011. DOI:10.1016/j.jallcom.2011.11.066.10.1016/j.jallcom.2011.11.066 ↗
28. V. Smanio and T. Sourmail, Solid State Phenomena, 2011, vols. 172-174, pp. 821-26.10.4028/www.scientific.net/SSP.172-174.821 ↗
29. K.-E. Thelning: Steel and its Heat Treatment, Bofors Handbook, Butterworths, London and Boston, 1975, p. 92.