journal article·2001-05

Microstructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys

Ken R. Anderson, Joanna R. Groza

Publisher page

Abstract

Microstructural refinement to further improve the strength and stability of high-strength high-conductivity Cu-Cr-Nb alloys was attained by mechanical milling (MM). Mechanically milled Cu-4Cr-2Nb and Cu-8Cr-2Nb exhibited an increase in hot-pressed Vickers hardness of 122 and 96 pct, respectively. Mechanical milling produced a corresponding decrease in electrical conductivity of ∼33 pct for both alloys. The increase in hardness was more due to Cu grain-size refinement than to second-phase particle-size refinement. The drop in conductivity was due to second-phase particle-size refinement, which both increased particle/matrix interfacial area and solute solubility. Mechanically processed Cu-4Cr-2Nb displayed an enhanced thermal stability. Hot-pressed 4-hour milled Cu-4Cr-2Nb experienced a 30 pct increase in conductivity with only a 22 pct drop in hardness when annealed at 1273 K for 50 hours. Such changes were largely due to an increase in dispersed-particle size (i.e., a decrease in solute and interfacial electron scattering) and Cu grain size (reduced Hall-Petch effect), respectively. The optimum hardness and conductivity combination was found in 4-hour milled and hot-pressed Cu-4Cr-2Nb material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. D.L. Ellis: Ph.D. Thesis, Case Western Reserve University, Cleveland, OH, 1989; also NASA CR 185144, NASA Lewis Research Center, Cleveland, OH, 1989.
2. D.L. Ellis, G.M. Michal, and N.W. Orth: Scripta Metall., 1990, vol. 24, pp. 885–90.10.1016/0956-716X(90)90130-9 ↗
3. K.R. Anderson, J.R. Groza, R.L. Dreshfield, and D.L. Ellis: Mater. Sci. Eng., 1993, vol. A169, pp. 167–75.10.1016/0921-5093(93)90611-H ↗
4. K.R. Anderson, J.R. Groza, R.L. Dreshfield, and D.L. Ellis: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2197–2206.10.1007/BF02671235 ↗
5. K.R. Anderson: Master’s Thesis, University of California at Davis, Davis, CA, 1995; also NASA CR 198492, NASA Lewis Research Center, Cleveland, OH, 1996.
6. K.R. Anderson: Ph.D. Dissertation, University of California at Davis, Davis, CA, 1999: also NASA CR-2000-209812, NASA John Glenn Research Center, Cleveland, OH, 2000.
7. B. Warren and B. Averbach: J. Appl. Phys., 1950, vol. 21, p. 595.10.1063/1.1699713 ↗
8. D.L. Ellis: NASA John Glenn Research Center, Cleveland, OH, private communication, 1993.
9. E.A. Brandes and G.R. Brook: Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann, Oxford, United Kingdom, 1992, vol. 28, p. 22.
10. D.L. Ellis, R.L. Dreshfield, M.J. Verrilli, and D.G. Ulmer: Paper presented at the Advanced Earth-to-Orbit Propulsion Technology Conf., NASA Marshall Space Flight Center, Huntsville, AL, May 17–19, 1994.
11. D.L. Ellis: NASA John Glenn Research Center, Cleveland, OH, unpublished research, 1996.
12. A.L. Wingrove: J. Inst. Met., 1972, vol. 100, pp. 313–14.
13. G.W. Nieman, J.R. Weertman, and R.W. Siegel: J. Mater. Res., 1991, vol. 6, pp. 1012–27.10.1557/JMR.1991.1012 ↗
14. C.R. Brooks: Heat Treatment, Structure and Properties of Nonferrous Alloys, ASM, Metals Park, OH, 1990, p. 283.
15. J.G. Schroth and V. Franetovic: JOM, 1989, vol. 41 (1), pp. 37–39.10.1007/BF03220801 ↗
16. D.R. Maurice and T.H. Courtney: Metall. Trans. A, 1990, vol. 21A, pp. 289–303.10.1007/BF02782409 ↗
17. M.L. Öveçoglu and W.D. Nix: Int. J. Powder Metall., 1986, vol. 22, pp. 17–30.
18. G.A. Jerman, I.E. Anderson, and J.D. Verhoeven: Metall. Trans. A, 1993, vol. 24A, pp. 35–42.10.1007/BF02669600 ↗
19. J.D. Verhoeven, H.L. Downing, L.S. Chumbley, and E.D. Gibson: J. Appl. Phys., 1989, vol. 65, pp. 1293–1301.10.1063/1.343024 ↗
20. W.A. Spitzig, A.R. Pelton, and F.C. Laabs: Acta Metall., 1987, vol. 35, pp. 2427–44.10.1016/0001-6160(87)90140-4 ↗
21. C.L. Trybus and W.A. Spitzig: Acta Metall., 1989, vol. 37, pp. 1971–81.10.1016/0001-6160(89)90081-3 ↗
22. J.D. Verhoeven, S.C. Chueh, and E.D. Gibson: J. Mater. Sci., 1989, vol. 24, pp. 1748–52.10.1007/BF01105700 ↗
23. J.D. Verhoeven, W.A. Spitzig, L.L. Jones, H.L. Downing, C.L. Trybus, E.D. Gibson, L.S. Chumbley, L.G. Fritzemeier, and G.D. Schnittgrund: J. Mater. Eng., 1990, vol. 12, pp. 127–39.10.1007/BF02834066 ↗
24. J.Y. Huang, Y.K. Wu, and H.Q. Ye: Mater. Sci. Eng., 1995, vol. A199, pp. 165–72.10.1016/0921-5093(94)09715-1 ↗
25. P. Le Brun, E. Gaffet, L. Froyen, and L. Delaey: Scripta Metall., 1992, vol. 26, pp. 1743–48.10.1016/0956-716X(92)90545-P ↗
26. J. Naser, W. Riehemann, and H. Ferkel: Mater. Sci. Eng., 1997, vols. A234-A236, pp. 467–69.10.1016/S0921-5093(97)00269-4 ↗
27. R.Z. Valiev: Mater. Sci. Eng., 1997, vols. A234-A236, pp. 59–66.10.1016/S0921-5093(97)00183-4 ↗
28. H. Chokshi, A. Rosen, J. Karch, and H. Gleiter: Scripta Metall., 1989, vol. 23, pp. 1679–83.10.1016/0036-9748(89)90342-6 ↗
29. J. Lian, R.Z. Valiev, and B. Boudelet: Acta Mater., 1995, vol. 43, pp. 4165–70.10.1016/0956-7151(95)00087-C ↗
30. R.R. Vance and T.H. Courtney: Scripta Metall., 1992, vol. 26, pp. 1435–40.10.1016/0956-716X(92)90662-X ↗
31. M.A. Morris and D.G. Morris: Mater. Sci. Eng., 1988, vol. A104, pp. 201–13.10.1016/0025-5416(88)90422-3 ↗
32. M.A. Morris and D.G. Morris: Mater. Sci. Eng., 1989, vol. A111, pp. 115–27.10.1016/0921-5093(89)90204-9 ↗
33. D.G. Morris and M.A. Morris: Scripta Metall. Mater., 1990, vol. 24, pp. 1701–06.10.1016/0956-716X(90)90532-L ↗
34. D.G. Morris and M.A. Morris: Acta Metall., 1991, vol. 39, pp. 1763–70.10.1016/0956-7151(91)90144-P ↗
35. D.G. Morris and M.A. Morris: Mater. Sci. Eng., 1991, vol. A134, pp. 1418–21.10.1016/0921-5093(91)91004-C ↗
36. P.M. Hazzledine: Scripta Metall. Mater., 1992, vol. 26, pp. 57–58.10.1016/0956-716X(92)90368-O ↗
37. U.F. Kocks: Phil. Mag., 1966, vol. 13, pp. 541–66.10.1080/14786436608212647 ↗
38. M.F. Ashby: in Strengthening Methods in Crystals, A. Kelley and R.B. Nicholson, eds., Elsevier, New York, NY, 1971, p. 165.
39. E.O. Hall: Proc. Phys. Soc., London, 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
40. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
41. N. Hansen: Metall. Trans. A, 1985, vol. 16A, pp. 2167–90.10.1007/BF02670417 ↗
42. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
43. T. Gladman: Proc. R. Soc., 1966, vol. A294, pp. 298–309.
44. C.S. Smith (communication with C. Zener): Trans. Am. Inst. Min. Eng., 1948, vol. 175, pp. 47–56.
45. S.E. Broyles, K.R. Anderson, J.R. Groza, and J.C. Gibeling: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1217–27.10.1007/BF02649859 ↗
46. J. Robles, K.R. Anderson, J.R. Groza, and J.C. Gibeling: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2235–45.10.1007/BF02652324 ↗
47. J.J. Stephens and C.R. Hills: “Long Term Stability of Two Dispersion Strengthened Copper Alloys at Elevated Temperatures,” Sandia National Laboratories, Albuquerque, NM, 1990; paper presented at the 119th Annual Meeting of TMS, Anaheim, CA, Feb. 18–22, 1990.
48. J.S. Benjamin and R.D. Schelleng: Metall. Trans. A, 1981, vol. 12A, pp. 1827–32.10.1007/BF02643766 ↗
49. A. Boltax: Trans. TMS-AIME, 1960, vol. 218, pp. 812–21.
50. W.A. Spitzig, L.S. Chumbley, J.D. Verhoeven, Y.S. Go, and H.L. Downing: J. Mater. Sci., 1992, vol. 27, pp. 2005–11.10.1007/BF01117911 ↗
51. J. Miyake and M.E. Fine: Acta Metall., 1992, vol. 40, pp. 733–41.10.1016/0956-7151(92)90015-7 ↗
52. A. Manzano-Ramirez, E. Nava-Vazquez, and J. Gonzalez-Hernandez: Metall. Trans. A, 1993, 24A, pp. 2355–58.
53. N. Fuschillo and M.L. Gimpl: J. Appl. Phys., 1971, vol. 42, pp. 5513–16.10.1063/1.1659972 ↗