High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents
Source abstract
Abstract
Multiphase alloys in the Mo-Si-B system are potential high-temperature structural materials due to their good oxidation and creep resistance. Since they suffer from relatively high densities, the current study focuses on the influence of density-reducing Ti additions on creep and oxidation behavior at temperatures above 1273 K (1000 °C). Two alloys with compositions of Mo-12.5Si-8.5B-27.5Ti and Mo-9Si-8B-29Ti (in at. pct) were synthesized by arc melting and then homogenized by annealing in vacuum for 150 hours at 1873 K (1600 °C). Both alloys show similar creep behavior at stresses of 100 to 300 MPa and temperatures of 1473 K and 1573 K (1200 °C and 1300 °C), although they possess different intermetallic volume fractions. They exhibit superior creep resistance and lower density than a state-of-the-art Ni-base superalloy (single-crystalline CMSX-4) as well as other Mo-Si-B alloys. Solid solution strengthening due to Ti was confirmed by Vickers hardness measurements and is believed to be the reason for the significant increase in creep resistance compared to Mo-Si-B alloys without Ti, but with comparable microstructural length scales. The addition of Ti degrades oxidation resistance relative to a Mo-9Si-8B reference alloy due to the formation of a relatively porous duplex layer with titania matrix enabling easy inward diffusion of oxygen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. D. M. Dimiduk and J. H. Perepezko: MRS Bulletin, 2003, vol. 28, pp. 639–45.10.1557/mrs2003.191 ↗
2. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90–91.10.1126/science.1121738 ↗
3. B. P. Bewlay, M. R. Jackson, J.-C. Zhao, P. R. Subramanian, M. G. Mendiratta, and J. J. Lewandowski: MRS Bulletin, 2003, vol. 28, pp. 646–53.10.1557/mrs2003.192 ↗
4. P. Jéhanno, M. Heilmaier, H. Kestler, M. Böning, A. Venskutonis, B. Bewlay and M. Jackson: Metall. Mater. Trans. A, 2005, 36A: 515–23.10.1007/s11661-005-0165-5 ↗
5. J. H. Schneibel, C. T. Liu, D. S. Easton, and C. A. Carmichael: Mater. Sci. Eng. A, 1999, vol. 261, pp. 78–83.10.1016/S0921-5093(98)01051-X ↗
6. D.M. Berczik: US Patents 5,595,616 and 5,693156, 1997.
7. H. Choe, D. Chen, J. H. Schneibel, and R. O. Ritchie: Intermetallics, 2001, vol. 9, pp. 319–29.10.1016/S0966-9795(01)00008-5 ↗
8. T. A. Parthasarathy, M. G. Mendiratta, and D. M. Dimiduk: Acta Mater., 2002, vol. 50, pp. 1857–68.10.1016/S1359-6454(02)00039-3 ↗
9. P. Jéhanno, M. Heilmaier, and H. Kestler: Intermetallics, 2004, vol. 12, pp. 1005–09.10.1016/j.intermet.2004.03.006 ↗
10. G. Erickson: JOM, 1995, vol. 47, pp. 36–39.10.1007/BF03221147 ↗
11. Y. Yang, Y. A. Chang, L. Tan, and W. Cao: Acta Materialia, 2005, vol. 53, pp. 1711–20.10.1016/j.actamat.2004.12.020 ↗
12. R. Sakidja and J. H. Perepezko: J. Nucl. Mater., 2007, vol. 366, pp. 407–16.10.1016/j.jnucmat.2007.03.029 ↗
13. Y. Yang, H. Bei, S. Chen, E. P. George, J. Tiley, and Y. A. Chang (2010) Acta Mater. 58:541–48.10.1016/j.actamat.2009.09.032 ↗
14. Y. Yang, Y. A. Chang, L. Tan, and Y. Du: Mater. Sci. Eng. A, 2003, vol. 361, pp. 281–93.10.1016/S0921-5093(03)00560-4 ↗
15. Y. Yang and Y. A. Chang: Intermetallics, 2005, vol. 13, pp. 121–28.10.1016/j.intermet.2004.06.007 ↗
16. I. Rosales, H. Martinez, D. Bahena, J. A. Ruiz, R. Guardian, and J. Colin: Corros. Sci., 2009, vol. 51, pp. 534–38.10.1016/j.corsci.2008.12.004 ↗
17. M. K. Meyer, M. J. Kramer, and M. Aknic: Advanced Materials, 1996, vol. 8, pp. 85–88.10.1002/adma.19960080118 ↗
18. M. K. Meyer, M. J. Kramer, and M. Akinca: Intermetallics, 1996, vol. 4, pp. 273–81.10.1016/0966-9795(95)00048-8 ↗
19. J. H. Schneibel, P. F. Tortorelli, R. O. Ritchie, and J. J. Kruzic: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 525–31.10.1007/s11661-005-0166-4 ↗
20. R. Mitra: Int. Mat. Rev., 2006, vol. 51, pp. 13–64.10.1179/174328006X79454 ↗
21. S.-H. Haa, K. Yoshimia, K. Maruyamaa, R. Tub, and T. Goto. (2012) Mater. Sci. Eng. A 552:179–88.10.1016/j.msea.2012.05.028 ↗
22. M. Azim, S. Burk, B. Gorr, H.-J. Christ, D. Schliephake, M. Heilmaier, R. Bornemann, and P. Haring Bolivar: Oxid. Met. DOI: 10.1007/s11085-013-9375-1.10.1007/s11085-013-9375-1 ↗
23. S. Burk, B. Gorr, V. B. Trindade, and H.-J. Christ: Oxid. Met., 2009, vol. 73, pp. 163–81.10.1007/s11085-009-9175-9 ↗
24. R. Sakidja, J. H. Perepezko, S. Kim, and N. Sekido: Acta Mater., 2008, vol. 56, no. 18, pp. 5223–44.10.1016/j.actamat.2008.07.015 ↗
25. Y. Liu, M. J. Kramer, A. J. Thom, and M. Akinc: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 601–07.10.1007/s11661-005-0175-3 ↗
26. R. W. Ricker, R. A. Hummel (1951) J Am Ceram Soc 34:271–79.10.1111/j.1151-2916.1951.tb09129.x ↗
27. T. K. Gupta, J. H. Jean (1994) J Mater Res 9:999–1009.10.1557/JMR.1994.0999 ↗
28. S. Burk, B. Gorr and H.-J. Christ: Acta Mater., 2010, vol. 58, pp. 6154–65.10.1016/j.actamat.2010.07.034 ↗
29. K. Yoshimia, S. Nakatanic, T. Sudac, S. Hanadaa, and H. Habazakid: Intermetallics, 2002, 10:407–14.10.1016/S0966-9795(02)00013-4 ↗
30. N. P. Bansal and R. H. Doremus (1986) Handbook of Glass Properties. Academic Press, New York.
31. P. Kopfstad (1972) Nonstoichiometry, Diffusion, and Electrical Conductivity in Binary Metal Oxide. Wiley, New York.
32. S. Burk, B. Gorr, H.-J. Christ, D. Schliephake, M. Heilmaier, C. Hochmuth, and U. Glatzel: Scripta Mater., 2012, vol. 66, pp. 223–26.10.1016/j.scriptamat.2011.10.042 ↗
33. H. Mughrabi (2009) Mater. Sci. Technol. 25:191–204.10.1179/174328408X361436 ↗
34. R. Sakidja, H. Sieber, and J. H. Perepezko: Philos. Mag. Lett., 1999, vol. 79, pp. 351–57, 1999.10.1080/095008399177192 ↗
35. P. Jéhanno, M. Heilmaier, H. Saage, M. Böning, H. Kestler, J. Freudenberger, and S. Drawin (2007) Mater. Sci. Eng. A 463:216–23.10.1016/j.msea.2006.08.125 ↗
36. I. Rosales and J. H. Schneibel: Intermetallics, 2000, vol. 8, pp. 885–89.10.1016/S0966-9795(00)00058-3 ↗
37. K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp. 591–602.10.1016/S0966-9795(01)00049-8 ↗
38. R. Rosenkranz, G. Frommeyer, and W. Smarsly: Mater. Sci. Eng. A,, 1992, vol. 152, pp. 288–94.10.1016/0921-5093(92)90081-B ↗
39. P. Jéhanno, M. Heilmaier, H. Saage, H. Heyse, M. Böning, H. Kestler, and J. H. Schneibel: Scripta Mater., 2006, vol. 55, pp. 525–28.10.1016/j.scriptamat.2006.05.033 ↗
40. H. J. Frost and M. F. Ashby (1982) Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics. Pergamon Press, Oxford.
41. M. Heilmaier, M. Krüger, H. Saage, J. Rösler, D. Mukherji, U. Glatzel, R. Völkl, R. Hüttner, G. Eggeler, C. Somsen, T. Depka, H.-J. Christ, B. Gorr, and S. Burk: JOM, 2009, vol. 61, pp. 61–67.10.1007/s11837-009-0106-7 ↗
42. P. Jain and K.S. Kumar: Acta Mater., 58, 2010, 2124–42.10.1016/j.actamat.2009.11.054 ↗
43. D. Sturm, M. Heilmaier, J. H. Schneibel, P. Jéhanno, B. Skrotzki, and H. Saage (2007) Mater. Sci. Eng. A 463:107–14.10.1016/j.msea.2006.07.153 ↗
44. A. P. Alur, N. Chollacoop, and K. S. Kumar: Acta Materialia, 2004, vol. 52, pp. 5571–87.10.1016/j.actamat.2004.08.035 ↗