journal article·2010-12

Understanding the Co-Poisoning Effect of Zr and Ti on the Grain Refinement of Cast Aluminum Alloys

D. Qiu, J.A. Taylor, M.-X. Zhang

Publisher page

Abstract

The "co-poisoning" effect between Zr and Ti (derived from Al-Zr and Al-Ti-B master alloy additions) on the grain refinement of cast aluminum alloys is studied from a crystallographic atom matching viewpoint. The edge-to-edge matching (E2EM) model has been used to investigate the possible "poisoning" phase containing Zr/Ti, Al, and Fe in commercial grade aluminum alloys. The results show that AlTi is the most likely constituent to be poisoned due to the formation of an AlFe Zr coating on its surface, since the AlFeZr phase has good crystallographic atom matching with AlTi, but not with the aluminum matrix. Meanwhile, the partial dissolution of AlZr nucleant particles to compensate for the loss of solute Zr aggravates the poisoning phenomenon. This proposed mechanism is consistent with most previous experimental observations and with existing practical solutions employed in the foundry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. D.G. McCartney: Int. Mater. Rev., 1989, vol. 34, pp. 247–60.10.1179/imr.1989.34.1.247 ↗
2. M. Easton and D.H. St. John: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613–33.10.1007/s11661-999-0098-5 ↗
3. B.S. Murty, S.A. Kori, and M. Chakraborty: Int. Mater. Rev., 2002, vol. 47, pp. 3–29.10.1179/095066001225001049 ↗
4. A.L. Greer, P.S. Cooper, M.W. Meredith, W. Schneider, P. Schumacher, J.A. Spittle, and A. Tronche: Adv. Eng. Mater., 2003, vol. 5, pp. 81–91.10.1002/adem.200390013 ↗
5. A. Cibula: J. Inst. Met., 1949, vol. 76, pp. 321–60.
6. G.P. Jones and J. Pearson: Metall. Trans. B, 1976, vol. 7B, pp. 223–34.10.1007/BF02654921 ↗
7. A.A. Rao, B.S. Murty, and M. Chakraborty: Mater. Sci. Technol., 1997, vol. 13, pp. 769–77.10.1179/mst.1997.13.9.769 ↗
8. J.A. Marcantonio and L.F. Mondolfo: J. Inst. Met., 1970, vol. 98, pp. 23–27.
9. L.K. Lamikhov and G.V. Samsonov: Tsv. Metally, 1964, vol. 8, pp. 79–82.
10. A.M. Bunn, P. Schumacher, M.A. Kearns, B.C. Boothroyd, and A.L. Greer: Mater. Sci. Technol., 1999, vol. 15, pp. 1115–23.10.1179/026708399101505158 ↗
11. S.M. Ahmady, D.G. McCartney, and S.R. Thistlethwaite: Proc. Conf. “Light Metals 1990,” TMS, Warrendale, PA, 1990, pp. 837–43.
12. B.S. Murty BS, S.A. Kori, and M. Chakraborty: Proc. 6th Asian Foundry Congr., Calcutta, India, 1999, pp. 231–43.
13. A.J. Whitehead, S.A. Danilak, and D.A. Granger: Proc. Conf. “Light Metals 1997,” TMS, Warrendale, PA, pp. 785–93.
14. W. Schneider, M.A. Kearns, M.J. McCartney, and A.J. Whitehead: Proc. Conf. “Light Metals 1998,” TMS, Warrendale, PA, pp. 953–61.
15. Y. Birol: J. Alloys Compd., 2006, vol. 422, pp. 128–31.10.1016/j.jallcom.2005.11.059 ↗
16. G.S. Vinod Kumar, B.S. Murty, and M. Chakraborty M: J. Alloys Compd., 2005, vol. 396, pp. 143–50.10.1016/j.jallcom.2004.12.039 ↗
17. H.M. Ding, X.F. Liu, and L.N. Yu: J. Mater. Sci., 2007; vol. 42, pp. 9817–21.10.1007/s10853-007-1987-x ↗
18. A.A. Abdel-Hamid: Z. Metallkd., 1989, vol. 80, pp. 566–69 and 643–47.
19. M. Johnsson: Z. Metallkd., 1994, vol. 85, pp. 786–89.
20. J.A. Spittle and S. Sadli S: Cast Met., 1994, vol. 7, pp. 247–53.10.1080/09534962.1995.11819185 ↗
21. D. Qiu, J.A. Taylor, M.-X. Zhang, and P.M. Kelly: Acta Mater., 2007, vol. 55, pp. 1447–56.10.1016/j.actamat.2006.09.046 ↗
22. P.M. Kelly and M.-X. Zhang: Mater. Forum, 1999, vol. 23, pp. 41–62.
23. M.-X. Zhang and P.M. Kelly: Scripta Mater., 2005, vol. 52, pp. 963–68.10.1016/j.scriptamat.2005.01.040 ↗
24. P.M. Kelly and M.-X. Zhang: Metall. Mater. Trans. A, 2006, vol. 37, pp. 833–39.10.1007/s11661-006-0056-4 ↗
25. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Van Nostrand Reinhold (International), London, 1981, pp. 197 and 145.
26. P.M. Kelly, M.-X. Zhang, Ma Qian, and J.A. Taylor: Acta Mater., 2005, vol. 53, pp. 3261–71.10.1016/j.actamat.2005.03.030 ↗
27. P.M. Kelly, M.-X. Zhang, M.A. Easton, and J.A. Taylor: Acta Mater., 2005, vol. 53, pp. 1427–38.10.1016/j.actamat.2004.11.037 ↗
28. D. Qiu D, M.-X. Zhang, H.-F. Fu, P.M. Kelly, and J.A. Taylor: Philos. Mag. Lett., 2007, vol. 87, pp. 505–14.10.1080/09500830701253151 ↗
29. D. Qiu, J.A. Taylor, M.-X. Zhang, H.-M. Fu, and P.M. Kelly: Acta Mater., 2007, vol. 55, pp. 1863–71.10.1016/j.actamat.2006.10.047 ↗
30. D. Qiu and W.-Z. Zhang: Acta Mater., 2006, vol. 54, pp. 339–47.10.1016/j.actamat.2005.09.009 ↗
31. A.S. Cooper: Acta Crystallogr., 1962, vol. 15, pp. 578–82.10.1107/S0365110X62001474 ↗
32. P. Norby and A.N. Christensen: Acta Chem. Scand. A, 1986, vol. 40, pp. 157–59.10.3891/acta.chem.scand.40a-0157 ↗
33. Y. Ma, C. Romming, B. Lebech, J. Gjonnes, and J. Tafto: Acta. Crystallogr. B, 1992, vol. 48, pp. 11–16.10.1107/S0108768191010467 ↗
34. B. Post, F.W. Glaser, and D. Moskowitz: Acta Metall., 1954, vol. 2, pp. 20–25.10.1016/0001-6160(54)90090-5 ↗
35. P. Villars, H. Okamoto, and K. Cenzual: ASM Alloy Phase Diagrams Center, http://www.asminternational.org/AsmEnterprise/APD, ASM INTERNATIONAL, Materials Park, OH, 2007, Diagram No. 1100161, 200229.
36. F. Stein, G. Sauthoff, and M. Palm: Z. Metallkd, 2004, vol. 95, pp. 469–85.10.3139/146.017985 ↗
37. M. Palm and J. Lacaze: Intermetallics, 2006, vol. 14, pp. 1291–303.10.1016/j.intermet.2005.11.026 ↗
38. A.N. Christensen: Acta. Chem. Scand. A, 1978, vol. 32, pp. 89–90.10.3891/acta.chem.scand.32a-0089 ↗
39. W.-Z. Zhang and G.C. Weatherly: Prog. Mater. Sci., 2005, vol. 50, pp. 181–292.10.1016/j.pmatsci.2004.04.002 ↗
40. J. Wu, W.-Z. Zhang, and X.-F. Gu: Acta Mater., 2009, vol. 57, pp. 635–45.10.1016/j.actamat.2008.10.003 ↗