The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La
Source abstract
Abstract
A mechanism by which La modifies the Fe-bearing intermetallics in a 6xxx series Al alloy is examined using calorimetry. Thermal events accompanying the formation of various phases are identified by establishing a correspondence between them and microstructures of as-cast alloys. It is concluded that a previously suggested surface adsorption mechanism is unlikely to be operative. During solidification, the addition of lanthanum results in the formation of the La(Al,Si)2 phase and the depletion of the remaining melt of Si. It is hypothesized that the decreased Si/Fe ratio in the melt caused by the presence of La favors the formation of the α-AlFeSi phase, which is less detrimental to the formability of the alloy than the β-AlFeSi phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. K. Spencer, S.F. Corbin, and D.J. Lloyd: Mater. Sci. Eng. A, 2002, vol. A325 (1–2), pp. 394–404.10.1016/S0921-5093(01)01481-2 ↗
2. W.B. Lievers, A.K. Pilkey, and D.J. Lloyd: Mater. Sci. Eng. A, 2003, vol. A361 (1–2), pp. 312–20.10.1016/S0921-5093(03)00535-5 ↗
3. J. Sarkar, T.R.G. Kutty, D.S. Wilkinson, J.D. Embury, and D.J. Lloyd: Mater. Sci. Eng. A, 2004, vol. A369 (1–2), pp. 258–66.10.1016/j.msea.2003.11.022 ↗
4. S.G. Shabestari and J.E. Gruzleski: Trans. AFS, 1995, vol. 26, pp. 285–93.
5. M.H. Mulazimoglu, A. Zaluska, J.E. Gruzleski, and F. Paray: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 929–36.10.1007/BF02649760 ↗
6. F. Paray, B. Kulunk, and J.E. Gruzleski: Mater. Sci. Technol., 1996, vol. 12 (4), pp. 315–22.10.1179/mst.1996.12.4.315 ↗
7. F.H. Samuel, A.M. Samuel, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2061–75.10.1007/s11661-001-0018-9 ↗
8. M. Ravi, U.T.S. Pillai, B.C. Pai, A.D. Damodaran, and E.S. Dwarakadasa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 391–400.10.1007/s11661-002-0100-y ↗
9. P. Ashtari, H. Tezuka, and T. Sato: Scripta Mater., 2004, vol. 51 (1), pp. 43–46.10.1016/j.scriptamat.2004.03.022 ↗
10. P. Ashtari, H. Tezuka, and T. Sato: Scripta Mater., 2005, vol. 53 (8), pp. 937–42.10.1016/j.scriptamat.2005.06.022 ↗
11. M. Hosseinifar and D.V. Malakhov: J. Mater. Sci., 2008, vol. 43 (22), pp. 7157–64.10.1007/s10853-008-3022-2 ↗
12. L. Backerud, E. Krol, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, vol. 1, Wrought Alloys, SkanAluminum, Oslo, 1986, pp. 125–28.
13. M.K. Abou Khatwa and D.V. Malakhov: CALPHAD, 2006, vol. 30 (2), pp. 159–70.10.1016/j.calphad.2005.09.001 ↗
14. COST 507, Thermochemical Database for Light Metal Alloys, Office for Official Publications of the European Communities, Luxembourg, 1998, vol. 2.
15. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
16. J. Goldstein, D.E. Newbury, D.C. Joy, C.E. Lyman, P. Echlin, E. Lifshin, L. Sawyer, and J.R. Michael: Scanning Electron Microscopy and X-ray Microanalysis, 3rd ed., Springer, New York, NY, 2003.10.1007/978-1-4615-0215-9 ↗
17. P. Rogl: in Ternary Alloys: a Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., Weinheim, New York, NY, 1988, pp. 338–40.
18. G.C. Weatherly, A. Perovic, N.K. Mukhopadhyay, D.J. Lloyd, and D.D. Perovic: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 213–18.10.1007/s11661-001-0251-2 ↗
19. W.J. Boettinger, U.R. Kattner, K. Moon, and J.H. Perepezko: in Methods for Phase Diagram Determination, J.-C. Zhao, ed., Elsevier, New York, NY, 2007, p. 217.
20. C. Hsu, K.A.Q. O’Reilly, B. Cantor, and R. Hamerton: Mater. Sci. Eng. A, 2001, vols. A304–A306 (1–2), pp. 119–24.10.1016/S0921-5093(00)01467-2 ↗
21. X.-G. Chen and J. Langlais: Mater. Sci. Forum, 2000, vols. 331–337 (1), pp. 215–22.10.4028/www.scientific.net/MSF.331-337.215 ↗
22. M. Hillert, L. Hoglund, and M Schalin: Mater. Trans. JIM, 2000, vol. 41 (8), pp. 1098–1103.10.2320/matertrans1989.41.1098 ↗
23. D.V. Malakhov, D. Panahi, and M. Gallerneault: CALPHAD, 2010, vol. 34 (2), pp. 159–66.10.1016/j.calphad.2010.01.006 ↗
24. H. Westengen: Z. Metallkd., 1982, vol. 73 (6), pp. 360–68.
25. A. Griger, S. Stefaniay, A. Lendvai, and T. Turmezey: Aluminium, 1989, vol. 10, pp. 1049–56.
26. C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Prog. Mater. Sci., 1998, vol. 43 (2), pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
27. Y. Birol: J. Mater. Process. Technol., 2004, vol. 148 (2), pp. 250–58.10.1016/j.jmatprotec.2004.01.056 ↗
28. K.B.S. Couto, S.R. Claves, W.H. Van Geertruyden, W.Z. Misiolek, and M. Goncalves: Mater. Sci. Technol., 2005, vol. 21 (2), pp. 263–68.10.1179/174328405X18584 ↗
29. W.M. Meredith, J. Worth, and R. Hamerton: Mater. Sci. Forum, 2002, vols. 396–402 (1), pp. 107–12.10.4028/www.scientific.net/MSF.396-402.107 ↗
30. G. Sha, K.A.Q. O’Reilly, B. Cantor, J. Worth, and R. Hamerton: Mater. Sci. Eng. A, 2001, vols. A304–A306 (1–2), pp. 612–16.10.1016/S0921-5093(00)01545-8 ↗
31. A.L. Dons: Z. Metallkd., 1985, vol. 76 (2), pp. 609–12.
32. Y. Langsrud: Key Eng. Mater., 1990, vols. 44–45, pp. 95–116.10.4028/www.scientific.net/KEM.44-45.95 ↗
33. A. Griger and S. Stefaniay: J. Mater. Sci., 1996, vol. 31 (24), pp. 6645–52.10.1007/BF00356274 ↗
34. H. Tanihata, T. Sugawara, K. Matsuda, and S. Ikeno: J. Mater. Sci., 1999, vol. 34 (6), pp. 1205–10.10.1023/A:1004504805781 ↗
35. W. Khalifa, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 807–25.10.1007/s11661-003-1009-9 ↗
36. M.O. Pekguleryuz and A.A. Kaya: Adv. Eng. Mater., 2003, vol. 5 (12), pp. 866–78.10.1002/adem.200300403 ↗