Crystal Plasticity Model Validation Using Combined High-Energy Diffraction Microscopy Data for a Ti-7Al Specimen
Source abstract
Abstract
High-Energy Diffraction Microscopy (HEDM) is a 3-d X-ray characterization method that is uniquely suited to measuring the evolving micro-mechanical state and microstructure of polycrystalline materials during in situ processing. The near-field and far-field configurations provide complementary information; orientation maps computed from the near-field measurements provide grain morphologies, while the high angular resolution of the far-field measurements provides intergranular strain tensors. The ability to measure these data during deformation in situ makes HEDM an ideal tool for validating micro-mechanical deformation models that make their predictions at the scale of individual grains. Crystal Plasticity Finite Element Models (CPFEM) are one such class of micro-mechanical models. While there have been extensive studies validating homogenized CPFEM response at a macroscopic level, a lack of detailed data measured at the level of the microstructure has hindered more stringent model validation efforts. We utilize an HEDM dataset from an alpha-titanium alloy (Ti-7Al), collected at the Advanced Photon Source, Argonne National Laboratory, under in situ tensile deformation. The initial microstructure of the central slab of the gage section, measured via near-field HEDM, is used to inform a CPFEM model. The predicted intergranular stresses for 39 internal grains are then directly compared to data from 4 far-field measurements taken between ~4 and ~80 pct of the macroscopic yield strength. The evolution of the elastic strain state from the CPFEM model and far-field HEDM measurements up to incipient yield are shown to be in good agreement, while residual stress at the individual grain level is found to influence the intergranular stress state even upon loading. Implications for application of such an integrated computational/experimental approach to phenomena such as fatigue are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Force Microscopy Techniques and Applications · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Committee on Integrated Computational Materials Engineering, National Research Council: Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security. Washington D.C.: National Academies Press, 2008.
2. J.C. Schuren, P.A. Shade, J.V. Bernier, S.F. Li, B. Blank, J. Lind, P. Kenesei, U. Lienert, R.M. Suter, T.J. Turner, D.M. Dimiduk, and J. Almer, Curr. Opin. Solid State Mater. Sci., 2015, 19, pp. 235-244. doi:10.1016/j.cossms.2014.11.003.10.1016/j.cossms.2014.11.003 ↗
3. U. Lienert, S.F. Li, C.M. Hefferan, J. Lind, R.M. Suter, J.V. Bernier, N.R. Barton, M.C. Brandes, M.J. Mills, M.P. Miller, B. Jakobsen, and W. Pantleon, JOM, 2011, 63, pp. 70-77.10.1007/s11837-011-0116-0 ↗
4. H.F. Poulsen, Three-Dimensional X-ray Diffraction Microscopy: Mapping Polycrystals and Their Dynamics, Springer, Berlin, 2004.10.1007/b97884 ↗
5. R. M. Suter, D. Hennessy, C. Xiao, and U. Lienert, Rev. Sci. Instrum, 2006, 77, 123905. doi:10.1063/1.240001710.1063/1.2400017 ↗
6. S.F. Li, J. Lind, C.M. Hefferan, R. Pokharel, U. Lienert, A. Rollett, & R.M. Suter, J. Appl. Crystallogr., 2012, 45, pp. 1098–1108. doi:10.1107/S0021889812039519.10.1107/S0021889812039519 ↗
7. S.F. Li and R.M. Suter, J. Appl. Crystallogr. 2013, 46, pp. 512-524. doi:10.1107/S0021889813005268.10.1107/S0021889813005268 ↗
8. H.F. Poulsen, S.F. Nielsen, E.M. Lauridsen, S. Schmidt, R.M. Suter, U. Lienert, L. Margulies, T. Lorentzen, and D.J. Jensen, J. Appl. Crystallogr. 2001, 34, pp. 751-756. doi:10.1107/S0021889801014273.10.1107/S0021889801014273 ↗
9. L. Margulies, T. Lorentzen, H.F. Poulsen, and T. Leffers, Acta Mater., 2002, 50, pp. 1771-1779. doi:10.1016/S1359-6454(02)00028-9.10.1016/S1359-6454(02)00028-9 ↗
10. J. Oddershede, S. Schmidt, H.F. Poulsen, H.O. Sorensen, J. Wright, and W. Reimers, J. Appl. Crystallogr. 2010, 43, pp. 539-549. doi:10.1107/S0021889810012963.10.1107/S0021889810012963 ↗
11. J. V. Bernier, N. R. Barton, U. Lienert, and M. P. Miller, J. Strain Anal. Eng. Des., 2011, 46, pp. 527-547. doi:10.1177/0309324711405761.10.1177/0309324711405761 ↗
12. P.A. Shade, B. Blank, J.C. Schuren, T.J. Turner, P. Kenesei, K. Goetze, R.M. Suter, J.V. Bernier, S.F. Li, J. Lind, U. Lienert and J. Almer, Rev. Sci. Instrum. 2015, 86, 093902. doi:10.1063/1.4927855.10.1063/1.4927855 ↗
13. H.F. Poulsen, J. Appl. Crystallogr. 2012, 45, pp. 1084-97. doi:10.1107/S0021889812039143.10.1107/S0021889812039143 ↗
14. P. R. Dawson, Int. J. Solids Struct. 2000, 37, pp. 115-130. doi:10.1016/S0020-7683(99)00083-9.10.1016/S0020-7683(99)00083-9 ↗
15. T. J. Turner and S. L. Semiatin, Modelling Simul. Mater. Sci. Eng., 2011, 19, 065010. doi:10.1088/0965-0393/19/6/065010.10.1088/0965-0393/19/6/065010 ↗
16. T.J. Turner, P.A. Shade, J. C. Schuren, and M.A. Groeber, Modelling Simul. Mater. Sci. Eng., 2013, 21, 015002. doi: 10.1088/0965-0393/21/1/015002.10.1088/0965-0393/21/1/015002 ↗
17. E. Marin and P.R. Dawson: Comput. Methods Appl. Mech. Eng., 1998, vol. 165, pp. 23–41. doi:10.1016/S0045-7825(98)00033-4.10.1016/S0045-7825(98)00033-4 ↗
18. E. Marin and P.R. Dawson: Comput. Methods Appl. Mech. Eng., 1998, vol. 165, pp. 1–21. doi:10.1016/S0045-7825(98)00034-6.10.1016/S0045-7825(98)00034-6 ↗
19. N.R. Barton, D.J. Benson, and R. Becker, Modell. Simul. Mater. Sci. Eng., 2005, 13, pp. 707–731. doi:10.1088/0965-0393/13/5/006.10.1088/0965-0393/13/5/006 ↗
20. T.J. Turner and M.P. Miller, J. Eng. Mater. Technol., 2007, 129, pp. 367-379. doi:10.1115/1.2744395.10.1115/1.2744395 ↗
21. N.R. Barton, J. Knap, A. Arsenlis, R. Becker, R.D. Hornung, and D.R. Jefferson, Inter. J. Plasticity, 2008, 24(2) pp. 242–266. doi:10.1016/j.ijplas.2007.03.004.10.1016/j.ijplas.2007.03.004 ↗
22. R. Becker, Acta Metall. Mater., 1991, 39(6), pp. 1211-1230 (doi:10.1016/0956-7151(91)90209-J).10.1016/0956-7151(91)90209-J ↗
23. R. Becker and S. Panchanadeeswaran, Acta Metall. Mater., 1995, 43(7), pp. 2701-2719 (doi:10.1016/0956-7151(94)00460-Y).10.1016/0956-7151(94)00460-Y ↗
24. S. Panchanadeeswaran, R.D. Doherty, and R. Becker, Acta Mater., 1996, 44 (3), pp. 1233-1262. doi:10.1016/1359-6454(95)00186-7.10.1016/1359-6454(95)00186-7 ↗
25. A. Bhattacharyya, E. El-Danaf, S.R. Kalidindi, R.D. Doherty, International Int. J. Plasticity, 2001, 17(6), pp. 861-883. doi:10.1016/S0749-6419(00)00072-3.10.1016/S0749-6419(00)00072-3 ↗
26. K. Mathur, P.R. Dawson, Int. J. Plasticity, 1989, 5(1), pp. 67-94. doi:10.1016/0749-6419(89)90020-X.10.1016/0749-6419(89)90020-X ↗
27. N. Zaafarani, D. Raabe, R.N. Singh, F. Roters, and S. Zaefferer, Acta Mater., 2006, 54(7), pp. 1863-1876 doi:10.1016/j.actamat.2005.12.01410.1016/j.actamat.2005.12.014 ↗
28. M. Obstalecki, S-L. Wong, P.R. Dawson, M.P. Miller, Acta Mater., 2014, 75, pp. 259-272. doi:10.1016/j.actamat.2014.04.059.10.1016/j.actamat.2014.04.059 ↗
29. R. Pokharel, J. Lind, A. Kanjarla, R. Lebensohn, S-F. Li, P. Kenesei, R. Suter, A. Rollet, Annu. Rev. Condens. Matter Phys., 2014, 5, pp. 317–346. doi:10.1146/annurev-conmatphys-031113-133846.10.1146/annurev-conmatphys-031113-133846 ↗
30. H. Abdolvand, M. Majkut, J. Oddershede, S. Schmidt, U. Lienert, B. Diak, P.J. Wither, and M.R. Daymond, Int. J. Plasticity, 2015, 70, pp. 77-97. doi:10.1016/j.ijplas.2015.03.001.10.1016/j.ijplas.2015.03.001 ↗
31. H. Abdolvand, M. Majkut, J. Oddershede, Wright J, and M.R. Daymond, Acta Mater., 2015, 93, pp. 235-245. doi:10.1016/j.actamat.2015.04.025.10.1016/j.actamat.2015.04.025 ↗
32. H. Proudhon, J. Li, P. Reischig, N. Gueninchault, S. Forest and W. Ludwig: Adv. Eng. Mater., 2015, pp. 1–10. doi:10.1002/adem.201500414.10.1002/adem.201500414 ↗
33. T.J. Turner, P. A. Shade, J.V. Bernier, S-F. Li, J.C. Schuren, J. Lind, U. Lienert, P. Kenesei, R.M. Suter, B. Blank, and J. Almer, Integr. Mater. Manuf. Innov., 2016, 5, 5. doi:10.1186/s40192-016-0048-1.10.1186/s40192-016-0048-1 ↗
34. http://hdl.handle.net/11256/599.
35. A. Anderson, R. Cooper, R. Neely, A. Nichols, R. Sharp and B. Wallin: 2003 Users manual for ALE3D—An Arbitrary Lagrange/Eulerian 3D Code System. Technical Report UCRL-MA-152204, Lawrence Livermore National Laboratory
36. A. L. Pilchak, Scripta Mater., 2013, 68(5), pp. 277-280. doi:10.1016/j.scriptamat.2012.10.04110.1016/j.scriptamat.2012.10.041 ↗
37. U. Lienert, M. C. Brandes, J. V. Bernier, J.Weiss, S. D. Shastri, M. J. Mills, and M. P. Miller, Mater. Sci. Eng. A, 2009, 524 (1-2), pp. 46-54. doi:10.1016/j.msea.2009.06.047.10.1016/j.msea.2009.06.047 ↗
38. M. C. Brandes, M. J. Mills, and J. C. Williams, Metall. Mater. Trans. A, 2010, 41A, pp. 3463-3472. doi:10.1007/s11661-010-0407-z10.1007/s11661-010-0407-z ↗
39. J. Kwon, M. C. Brandes, P. Sudharshan Phani, A. P. Pilchak, Y. F. Gao, E. P. George, G. M. Pharr, and M. J. Mills, Acta Mater., 2013, 61(13), pp. 4743-4756 doi:10.1016/j.actamat.2013.05.00510.1016/j.actamat.2013.05.005 ↗
40. P.A. Shade, D.B. Menasche, J.V. Bernier, P. Kenesei, J-S. Park, R.M. Suter, J.C. Schuren, T.J. Turner, J. Appl. Crystallogr., 2016, 49, pp. 700-704. doi:10.1107/S1600576716001989.10.1107/S1600576716001989 ↗
41. https://github.com/praxes/hexrd.
42. J.K. Edmiston, N.R. Barton, J.V. Bernier, G.C. Johnson and D.J. Steigmann, J. Appl. Crystallogr., 2011, 44, pp. 299-312. doi:10.1107/S0021889811002123.10.1107/S0021889811002123 ↗
43. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, New York, 1993. doi:10.1002/crat.2170290414.10.1002/crat.2170290414 ↗
44. D. Tromans: Int. J. Res. Rev. Appl. Sci., 2011, vol. 6(4), pp. 462–83.
45. E. S. Fisher and C. J. Renkin, Phys. Rev., 1964, 135, p. A482. doi:10.1103/PhysRev.135.A482.10.1103/PhysRev.135.A482 ↗
46. https://github.com/FrankieLi/IceNine.
47. P. Dawson, D. Boyce, S. MacEwen, and R. Rogge, Metall. Mater. Trans. A, 2000, 31A, pp. 1543-1555.10.1007/s11661-000-0165-4 ↗
48. N.R. Barton, P.R. Dawson, Metall. Mater. Trans. A, 2001, 32A, pp. 1967-197510.1007/s11661-001-0009-x ↗
49. N.R. Barton and P.R. Dawson: MSMSE, 2001, vol. 9, pp. 433–63.10.1088/0965-0393/9/5/308 ↗
50. D. Peirce, R.J. Asaro, A. Needleman, Acta Metall., 1982, 30(6), pp. 1087-1119. doi:10.1016/0001-6160(82)90005-0.10.1016/0001-6160(82)90005-0 ↗
51. D. Peirce, R.J. Asaro, A. Needleman, Acta Metall., 1983, 31(12), pp. 1951-1976. doi:10.1016/0001-6160(83)90014-7.10.1016/0001-6160(83)90014-7 ↗
52. A. Needleman, R.J. Asaro, J. Lemonds, D. Peirce, Comput. Methods Appl. Mech. Eng., 1985, 52(1-3), pp. 689–708. doi: 10.1016/0045-7825(85)90014-3.10.1016/0045-7825(85)90014-3 ↗
53. R.J. Asaro, A. Needleman, Acta Metall., 1985, 33(6), pp. 923-953. doi: 10.1016/0001-6160(85)90188-9.10.1016/0001-6160(85)90188-9 ↗
54. G.I. Taylor and C.F. Elam, Proc. R. Soc. Lond. A, 1923, vol. 102(719), pp. 643–67.10.1098/rspa.1923.0023 ↗
55. W. Boas, R.W.K. Honeycombe, Nature, 1944, 153, pp. 494-495.10.1038/153494b0 ↗
56. R.R. Pawar, V.T. Deshpande, Acta Crystallogr., 1968, A24, pp. 316-317.10.1107/S0567739468000525 ↗
57. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
58. A. Yamaji, K. Sato, Geophys. J. Int., 2006, 167, pp. 933-942. doi:10.1111/j.1365-246X.2006.03188.x.10.1111/j.1365-246X.2006.03188.x ↗
59. H. Ritz, P.R. Dawson, T. Marin, J. Mech. Phys. Solid, 2010, 58(1), 54-72. doi:10.1016/j.jmps.2009.08.007.10.1016/j.jmps.2009.08.007 ↗
60. R. Lebensohn, A. Rollet, P. Suquet, 2011, JOM, 63(3), pp. 13-18. doi:10.1007/s11837-011-0037-y.10.1007/s11837-011-0037-y ↗
61. R. Lebensohn, A. Kanjarla, P. Eisenlohr, J. Plasticity, 2012, 32-33, pp. 59-69, doi:10.1016/j.ijplas.2011.12.005.10.1016/j.ijplas.2011.12.005 ↗