In-situ reactive processing of nickel aluminides by laser-engineered net shaping
Source abstract
Abstract
Nickel aluminide intermetallics (e.g., Ni3Al and NiAl) are considered to be attractive materials for high-temperature structural applications. Laser-engineered net shaping (LENS) is a rapid prototyping process, which involves laser processing fine metal powders into three-dimensional shapes directly from a computer-aided design (CAD) model. In this work, an attempt has been made to fabricate aluminide intermetallic compounds via reactive in-situ alloying from elemental powders using the LENS process. In-situ reactive alloying was achieved by delivering elemental Ni and Al powders from two different powder feeders, eliminating segregation observed in the samples deposited by using the premixed elemental powders. Nickel aluminides of various compositions were obtained easily by regulating the ratio of their feed rates. The aluminide deposits exhibited a high solidification and subsolidus cracking susceptibility and porosity formation. The observed porosity resulted from a water-atomized Ni powder and can be minimized or eliminated by the use of a N2-gas-atomized Ni powder of improved quality. Cracking was due to the combined effect of the high thermal stresses generated from the LENS processing and the brittleness of the intermetallics. Crack-free deposits were fabricated by preheating the substrate to a temperature of 450 °C to 500 °C during LENS processing. Compositionally graded Ni-Al deposits with a gradient microstructure were also produced by the in-situ reactive processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. N.S. Stoloff, C.T. Liu, and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1313–20.10.1016/S0966-9795(00)00077-7 ↗
2. V.K. Sikka: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, pp. 505–11.
3. Gamma Titanium Aluminide 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 3–40.
4. W. Hofmeister, M. Griffith, M. Ensz, and J. Smugeresky: JOM, 2001, vol. 53 (9), pp. 30–34.10.1007/s11837-001-0066-z ↗
5. G.K. Lewis and E. Schlienger: Mater. Design, 2000, vol. 21, pp. 417–23.10.1016/S0261-3069(99)00078-3 ↗
6. P.J. Maziasz, E.A. Payzant, M.E. Schlienger, and K.M. McHugh: Scripta Mater., 1998, vol. 39, pp. 1471–76.10.1016/S1359-6462(98)00349-2 ↗
7. P.A. Kobryn, E.H. Moore, and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 299–305.10.1016/S1359-6462(00)00408-5 ↗
8. M.L. Griffith, L.D. Harwell, J.A. Romero, E. Schlienger, C.L. Atwood, and J.E. Smugeresky: Proc. 8th Solid Freeform Fabrication Symp., University of Texas, Austin, TX, 1997, pp. 387–92.
9. K.I. Schwendner, R. Banerjee, P.C. Collins, C.A. Brice, and H.L. Fraser: Scripta Mater., 2001, vol. 45, pp. 1123–29.10.1016/S1359-6462(01)01107-1 ↗
10. X.D. Zhang, C. Brice, D.W. Mahaffey, H. Zhang, K. Schwendner, D.J. Evans, and H.L. Fraser: Scripta Mater., 2001, vol. 44, pp. 2419–24.10.1016/S1359-6462(01)00915-0 ↗
11. D. Srivastava, I.T.H. Chang, and M.H. Loretto: Intermetallics, 2001, vol. 9, pp. 1003–13.10.1016/S0966-9795(01)00063-2 ↗
12. ASM Handbook Committee: ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1999, pp. 2–49.
13. I. Barin, O. Knacke, and O. Kubaschewski: Thermochemical Properties of Inorganic Substances: Supplement, Springer-Verlag, Berlin, 1977, pp. 489–90.10.1007/978-3-662-02293-1 ↗
14. I. Barin and O. Knacke: Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, 1973, pp. 11 and 575.
15. S.C. Deevi and V.K. Sikka: Intermetallics, 1997, vol. 5, pp. 17–27.10.1016/S0966-9795(96)00067-2 ↗
16. J.J. Moore and H.J. Feng: Progr. Mater. Sci., 1995, vol. 39, pp. 243–73.10.1016/0079-6425(94)00011-5 ↗
17. D.F. Susan, J.D. Puskar, J.A. Brooks, and C.V. Robino: Proc. 11th Solid Freeform Fabrication Symp., University of Texas, Austin, TX, 2000.
18. S.A. David, W.A. Jemian, C.T. Liu, and J.A. Horton: Welding J., 1985, vol. 64 (1), pp. 22s-28s.
19. M.L. Santella, J.A. Horton, and S.A. David: Welding J., 1988, vol. 67 (3), pp. 63s-69s.
20. M.L. Santella, M.C. Maguire, and S.A. David: Welding J., 1989, vol. 68 (1), pp. 19s-27s.
21. S. Kou: Welding Metallurgy, John Wiley & Sons, Inc., New York, NY, 1987, p. 216.
22. C.T. Liu, J.O. Stiegler, and F.H. Froes: ASM Handbook, vol. 2, Ordered Intermetallics, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 911–42.