Fracture of Ti-Al3Ti metal-intermetallic laminate composites: Effects of lamination on resistance-curve behavior
Source abstract
Abstract
The fracture toughness and resistance-curve (R-curve) behavior of Ti-Al3Ti metal-intermetallic laminate (MIL) composites have been studied in the crack-divider orientation, by examining the effect of ductile-laminate-layer thickness and volume fraction. The MIL composites were fabricated in open air by a novel one-step process, and the final structure consists of alternating layers of ductile Ti and brittle Al3Ti. Such a laminate architecture in conjunction with a relatively low volume fraction of tougher Ti (18 to 40 pct) was seen to augment the fracture toughness of the inherently brittle intermetallic by over an order of magnitude. Additionally, as a result of their low density, MIL composites exhibit a specific fracture toughness (K/ρ) on par with tougher but relatively denser ductile metals such as high-strength steel. Such vast improvements may be rationalized through the toughening provided by the ductile Ti layers. Specifically, toughening was obtained through plastically stretching the intact ductile Ti layers that formed bridging zones in the crack wake, thus reducing the crack driving force. Such toughening resulted in R-curve behavior, and the toughness values increased with an increase in the volume percentage of Ti. Weight-function methods were used to model the bridging behavior, and they indicated that large bridging zones (∼2 to 3 mm) were responsible for the observed increase in toughness. The role of large-scale bridging (LSB) conditions on the resistance curves is explored, and steady-state toughness (K SS ) values are estimated using small-scale bridging (SSB) approximations. A new approach to gage the potential of laminate composites in terms of their true fracture-toughness values as determined from a cyclic crack-growth fatigue test is proposed, wherein small-scale specimens can be utilized to obtain fracture-toughness values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. G. Sauthoff: in Materials Science and Technology: A Comprehensive Treatment, Robert W. Cahn and Edward J. Kramer, eds., VCH, New York, NY, 1995, vol. 8.
2. R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal: Struct. Intermet., Proc. Int. Symp., Champion, PA, TMS, Warrendale, PA, 1993, vol. 1, pp. 1–15.
3. K.T.V. Rao, G.R. Odette, and R.O. Ritchie: Fatigue Adv. Mater., Proc. Eng. Found. Int. Conf., Santa Barbara, CA, Materials and Component Engineering Publications, Birmingham, UK, 1991, pp. 429–36.
4. K.T.V. Rao, G.R. Odette, and R.O. Ritchie: Acta Metall. Mater., 1992, vol. 40 (2), pp. 353–61.10.1016/0956-7151(92)90309-3 ↗
5. K.T.V. Rao, G.R. Odette, and R.O. Ritchie: Struct. Intermet., Proc. Int. Symp., Champion, PA, TMS, Warrendale, PA, 1993, vol. 1, pp. 829–35.
6. K.T.V. Rao, G.R. Odette, and R.O. Ritchie: Acta Metall Mater., 1994, vol. 42 (3), pp. 893–911.10.1016/0956-7151(94)90285-2 ↗
7. K.T.V. Rao and R.O. Ritchie: Intermetallic Matrix Composites II. Materials Research Society Symp. Proc., Materials Research Society, Pittsburgh, PA, 1992, vol. 273 pp. 127–33.
8. K.T.V. Rao and R.O. Ritchie: Mater. Sci. Eng., A: Struct. Mater.: Prop., Microstr. Processing, 1992, vol. A153 (1–2), pp. 479–85.
9. K.T.V. Rao and R.O. Ritchie: Fatigue Fract. Ordered Intermet. Mater. I, Proc. Symp., 1994, pp. 3–12.
10. K.T.V. Rao and R.O. Ritchie: Materials Research Society Symp. Proc, Materials Research Society, Pittsburgh, PA, 1992, vol. 273, pp. 127–133.
11. K.T.V. Rao, W.O. Soboyejo, and R.O. Ritchie: Metall. Trans. A, 1992, vol. 23A, pp. 2249–57.10.1007/BF02646018 ↗
12. W.O. Soboyejo, F. Ye, L.C. Chen, N. Bahtishi, D.S. Schwartz, and R.J. Lederich: Fatigue and Fracture of Ordered Intermetallic Materials II, Proc. Symp., Rosemont, IL, 1994, TMS, Warrendale, PA, 1995, pp. 359–90.
13. W.O. Soboyejo, F. Ye, and T.S. Srivatsan: Fatigue and Fracture of Ordered Intermetallic Materials II, Proc. Symp., Rosemont, IL, 1994, TMS, Warrendale, PA, 1995, pp. 391–415.
14. D.R. Bloyer, K.T.V. Rao, and R.O. Ritchie: Johannes Weertman Symp., Proc. Symp. held during the TMS Annual Meeting, Anaheim, CA, 1996, TMS, Warrendale, PA, 1996, pp. 261–66.
15. D.R. Bloyer, K.T.V. Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2483–96.10.1007/s11661-998-0220-0 ↗
16. D.R. Bloyer, K.T.V. Rao, and R.O. Ritchie: Mater. Sci. Eng., A: Struct. Mater.: Prop., Microstr. Processing, 1997, vols. A239–A240, pp. 393–98.10.1016/S0921-5093(97)00608-4 ↗
17. D.R. Bloyer, V. Rao, and R.O. Ritchie: Mater. Sci. Eng., A: Struct. Mater.: Prop., Microstr. Processing, 1996, vol. A216 (1–2), pp. 80–90.10.1016/0921-5093(96)10391-9 ↗
18. D.R. Bloyer, K.T.V. Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 633–42.10.1007/s11661-999-0055-3 ↗
19. D.R. Bloyer, K.T.V. Rao, and R.O. Ritchie: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1996, vol. 434, pp. 243–48.
20. K. Badrinarayanan, A.L. McKelvey, K.T.V. Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3781–92.10.1007/BF02595627 ↗
21. C.D. Bencher, A. Sakaida, K.T.V. Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2027–33.10.1007/BF02670674 ↗
22. G.R. Odette, B.L. Chao, J.W. Sheckherd, and G.E. Lucas: Acta Metall. Mater., 1992, vol. 40 (9), pp. 2381–89.10.1016/0956-7151(92)90157-A ↗
23. J. Heathcote, G.R. Odette, G.E. Lucas, R.G. Rowe, and D.W. Skelly: Acta Mater., 1996, vol. 44 (11), pp. 4289–99.10.1016/1359-6454(96)00112-7 ↗
24. J. Heathcote, G.R. Odette, G.E. Lucas, and R.G. Rowe: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, 1996, vol. 434, pp. 101–12.10.1557/PROC-434-101 ↗
25. J. Heathcote, G.R. Odette, and G.E. Lucas: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, 1996, vol. 434, pp. 183–88.10.1557/PROC-434-183 ↗
26. A. Rohatgi, D.J. Harach, K.S. Vecchio, and K.P. Harvey: Acta Mater., 2003, vol. 51, pp. 2933–57.10.1016/S1359-6454(03)00108-3 ↗
27. R. Menig, M.H. Meyers, M.A. Meyers, and K.S. Vecchio: Mater. Sci. Eng., 2001, vol. A297, pp. 203–11.10.1016/S0921-5093(00)01228-4 ↗
28. R. Menig, M.H. Meyers, M.A. Meyers, and K.S. Vecchio: Acta Mater., 2000, vol. 48, pp. 2383–98.10.1016/S1359-6454(99)00443-7 ↗
29. D.L. Anton and D.M. Shah: Intermetallic Matrix Composites, Materials Research Society Symposia Proceedings, 1990, vol. 194, pp. 45–58.10.1557/PROC-194-45 ↗
30. D.J. Harach and K.S. Vecchio: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1493–1505.10.1007/s11661-001-0237-0 ↗
31. D.E. Alman, J.C. Rawers, and J.A. Hawk: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 589–99.10.1007/BF02663908 ↗
32. Z. Xia, J. Liu, S. Zhu, and Y. Zhao: J. Mater. Sci., 1999, vol. 34 (15), pp. 3731–35.10.1023/A:1004624012683 ↗
33. D.E. Alman, C.P. Dogan, J.A. Hawk, and J.C. Rawers: Mater. Sci. Eng., A: Struct. Materials: Prop., Microstr. Processing, 1995, vols. A192–A193, pp. 624–32.10.1016/0921-5093(94)03300-5 ↗
34. H.E. Maupin and J.C. Rawers: J. Mater. Sci. Lett., 1993, vol. 12 (8), pp. 540–41.10.1007/BF00278316 ↗
35. J.C. Rawers, D.E. Alman, and J.A. Hawk: Int. J. Self-Propagating High-Temp. Synthesis, 1993, vol. 2 (1), pp. 12–24.
36. J.C. Rawers and H.E. Maupin: J. Mater Sci Lett 1993, vol. 12 (9), pp. 637–39.10.1007/BF00465576 ↗
37. D.E. Alman: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, 1996, vol. 434, pp. 255–60.10.1557/PROC-434-255 ↗
38. D.E. Alman and C.P. Dogan: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2759–62.10.1007/BF02669433 ↗
39. Y.T. Dong Seok Chung, M. Enoki, and T. Kishi: J. Jpn. Inst. Met., 1999, vol. 63, pp. 1043–52.10.2320/jinstmet1952.63.8_1043 ↗
40. D.-S. Chung, M. Enoki, and T. Kishi: Sci. Technol. Adv. Mater., 2002, vol. 3 (2), pp. 129–35.10.1016/S1468-6996(02)00007-4 ↗
41. D.R. Lesuer, C.K. Syn, O.D. Sherby, J. Wadsworth, J.J. Lewandowski, and W.H. Hunt, Jr.: Int. Mater. Rev., 1996, vol. 41 (5), pp. 169–97.10.1179/imr.1996.41.5.169 ↗
42. A.G. Evans: J. Am. Ceram. Soc., 1990, vol. 73 (2), pp. 187–206.10.1111/j.1151-2916.1990.tb06493.x ↗
43. R.O. Ritchie: Int. J. Fract., 2000, vol. 100 (1), p. 55–83.10.1023/A:1018655917051 ↗
44. R.O. Ritchie: Mater. Sci. Eng., A: Struct. Mater.: Prop., Microstr. Processing, 1988, vol. A103 (1), pp. 15–28.10.1016/0025-5416(88)90547-2 ↗
45. A.H. Heuer: J. Am. Ceram. Soc., 1987, vol. 70 (10), pp. 689–98.10.1111/j.1151-2916.1987.tb04865.x ↗
46. L. Murugesh, K.T.V. Rao, L.C. DeJonghe, and R.O. Ritchie: Intermetallic Matrix Composites II, Materials Research Society Symposia Proceedings, 1992, vol. 273, pp. 433–38.10.1557/PROC-273-433 ↗
47. D. Brooks, R.J. Lederich, and W.O. Soboyejo: Fatigue Fract. Ordered Intermet. Mater. I, Proc. Symp., TMS, Warrendale, PA, 1994, pp. 55–74.
48. B.D. Flinn, C.S. Lo, F.W. Zok, and A.G. Evans: J. Am. Ceram. Soc., 1993, vol. 76 (2), pp. 369–75.10.1111/j.1151-2916.1993.tb03794.x ↗
49. L.S. Sigl, P.A. Mataga, B.J. Dalgleish, R.M. McMeeking, and A.G. Evans: Acta Metall., 1988, vol. 36 (4), pp. 945–53.10.1016/0001-6160(88)90149-6 ↗
50. V.V. Krstic and P.S. Nicholson: J. Am. Ceram. Soc., 1981, vol. 64 (9), pp. 499–504.10.1111/j.1151-2916.1981.tb10313.x ↗
51. W.O. Soboyejo, F. Ye, L.C. Chen, N. Bahtishi, D.S. Schwartz, and R.J. Lederich: Acta Mater., 1996, vol. 44 (5), pp. 2027–41.10.1016/1359-6454(95)00272-3 ↗
52. L. Murugesh, K.T.V. Rao, and R.O. Ritchie: Scripta Metall. Mater., 1993, vol. 29 (8), pp. 1107–12.10.1016/0956-716X(93)90186-V ↗
53. P.A. Mataga: Acta Metall., 1989, vol. 37 (12), pp. 3349–59.10.1016/0001-6160(89)90207-1 ↗
54. B.D. Flinn, M. Ruhle, and A.G. Evans: Acta Metall., 1989, vol. 37 (11), pp. 3001–06.10.1016/0001-6160(89)90336-2 ↗
55. F. Zok, O. Sbaizero, C.L. Hom, and A.G. Evans: J. Am. Ceram. Soc., 1991, vol. 74 (1), pp. 187–93.10.1111/j.1151-2916.1991.tb07316.x ↗
56. J.D. Embury, F. Zok, D.J. Lahaie, and W. Poole: in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems, Materials Research Society, Pittsburgh, PA, 1995.
57. H.E. Deve and M.J. Maloney: Acta Metall. Mater., 1991, vol. 39 (10), pp. 2275–84.10.1016/0956-7151(91)90010-X ↗
58. H.C. Cao, B.J. Dalgleish, H.E. Deve, C. Elliott, A.G. Evans, R. Mehrabian, and G.R. Odette: Acta Metall., 1989, vol. 37 (11), pp. 2969–77.10.1016/0001-6160(89)90332-5 ↗
59. J. Rawers and K. Perry: J. Mater. Sci., 1996, vol. 31 (13), pp. 3501–06.10.1007/BF00360755 ↗
60. M. Enoki, A. Ohta, D.S. Chung, M. Watanabe, and T. Kishi: Nippon Kinzoku Gakkaishi, 2000, vol. 64 (11), pp. 1076–81.
61. J.C. Rawers and D.E. Alman: Compos. Sci. Technol., 1995, vol. 54 (4), pp. 379–84.10.1016/0266-3538(95)00072-0 ↗
62. K.S. Manabu Enoki, B.-N. Kim, and T. Kishi: J. Jpn. Inst. Met., 1999, vol. 63 (7), pp. 838–43.10.2320/jinstmet1952.63.7_838 ↗
63. R.G. Rowe, D.W. Skelly, M.R. Jackson, M. Larsen, and D. Lachapelle: Layered Materials for Structural Applications, Materials Research Society Symposium Proceedings, Materials Research Society, Pittsburgh, PA, 1996, vol. 434, pp. 3–13.
64. J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43 (5), pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
65. J.D. Rigney: Layered Materials for Structural Applications, Materials Research Society Symposium Proceedings, Materials Research Society, Pittsburgh, PA, 1996, vol. 434, pp. 227–41.
66. M. Bannister and M.F. Ashby: Acta Metall. Mater., 1991, vol. 39 (11), pp. 2575–82.10.1016/0956-7151(91)90072-9 ↗
67. S.M. Pickard and A.K. Ghosh: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 909–21.10.1007/BF02649758 ↗
68. L. Xiao and R. Abbaschian: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 403–15.10.1007/BF02657328 ↗
69. J.M. McNaney, R.M. Cannon, and R.O. Ritchie: Acta Mater., 1996, vol. 44 (12), pp. 4713–28.10.1016/S1359-6454(96)00126-7 ↗
70. Y. Huang and H.W. Zhang: Acta Metall. Mater., 1995, vol. 43 (4), pp. 1523–30.10.1016/0956-7151(94)00341-E ↗
71. B.J. Dalgleish, K.P. Trumble, and A.G. Evans: Acta Metall., 1989, vol. 37 (7), pp. 1923–31.10.1016/0001-6160(89)90077-1 ↗
72. M.Y. He, F.E. Heredia, D.J. Wissuchek, M.C. Shaw, and A.G. Evans: Acta Metall. Mater., 1993, vol. 41 (4), pp. 1223–28.10.1016/0956-7151(93)90171-N ↗
73. M.C. Shaw, D.B. Marshall, M.S. Dadkhah, and A.G. Evans: Acta Metall. Mater., 1993, vol. 41 (11), pp. 3311–22.10.1016/0956-7151(93)90060-6 ↗
74. H.C. Cao and A.G. Evans: Acta Metall. Mater., 1991, vol. 39 (12), pp. 2997–3005.10.1016/0956-7151(91)90032-V ↗
75. K.L. Hwu and B. Derby: Acta Mater., 1999, vol. 47 (2), pp. 545–63.10.1016/S1359-6454(98)00358-9 ↗
76. K.L. Hwu and B. Derby: Acta Mater., 1999, vol. 47 (2), pp. 529–43.10.1016/S1359-6454(98)00357-7 ↗
77. B.J. Dalgleish, M.C. Lu, and A.G. Evans: Acta Metall., 1988, vol. 36 (8), pp. 2029–35.10.1016/0001-6160(88)90304-5 ↗
78. D.R. Lesuer, J. Wadsworth, R.A. Riddle, C.K. Syn, J.J. Lewandowski, and W.H. Hunt, Jr.: Layered Materials for Structural Applications, Materials Research Society Symp. Proc., 1996, vol. 434, pp. 205–11.10.1557/PROC-434-205 ↗
79. M.R. Fox and A.K. Ghosh: Mater. Sci. Eng., 1999, vol. A259, pp. 261–68.10.1016/S0921-5093(98)00904-6 ↗
80. Q. Ma, M.C. Shaw, M.Y. He, B.J. Dalgleish, D.R. Clarke, and A.G. Evans: Acta Metall. Mater., 1995, vol. 43 (6), pp. 2137–42.10.1016/0956-7151(94)00445-5 ↗
81. J.H. Westbrook: Struct. Intermet., Proc. Int. Symp., TMS, Warrendale, PA, 1993, vol. 1.
82. D.L. Anton and D.M. Shah: High-Temperature Ordered Intermet. Alloys III, Materials Research Society Symposium Proceedings, Materials Research Society, Pittsburgh, PA, 1989, vol. 133 pp. 361–71.
83. J.M. Larsen, W.C. Revelos, and M.L. Gambone: Intermetallic Matrix Composites II, Materials Research Society Symposium Proceedings, 1992, vol. 273, pp. 3–16.10.1557/PROC-273-3 ↗
84. R.R. Adharapurapu, K.S. Vecchio, F. Jiang, and A. Rohatgi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1595–1608.10.1007/s11661-005-0251-8 ↗
85. B.N. Cox: Acta Metall. Mater., 1991, vol. 39 (6), pp. 1189–1201.10.1016/0956-7151(91)90207-H ↗
86. B.N. Cox and D.B. Marshall: Acta Metall. Mater., 1994, vol. 42 (2), pp. 341–63.10.1016/0956-7151(94)90492-8 ↗
87. F. Erdogan and P.F. Joseph: J. Am. Ceram. Soc. 1989, vol. 72 (2), pp. 262–70.10.1111/j.1151-2916.1989.tb06112.x ↗
88. M.F. Ashby, F.J. Blunt, and M. Bannister: Acta Metall., 1989, vol. 37 (7), pp. 1847–57.10.1016/0001-6160(89)90069-2 ↗
89. M. Bannister, H. Shercliff, G. Bao, F. Zok, and M.F. Ashby: Acta Metall. Mater., 1992, vol. 40 (7), pp. 1531–37.10.1016/0956-7151(92)90096-W ↗
90. F. Zok and C.L. Hom: Acta Metall. Mater., 1990, vol. 38 (10), pp. 1895–1904.10.1016/0956-7151(90)90301-V ↗
91. K.P. Harvey and K.S. Vecchio: University of California, San Diego, Lajolla, CA, unpublished work, 2003.
92. X.-R. Wu and A.J. Carlsson: Weight Functions and Stess Intensity Factor Solutions, 1st ed., Pergamon Press, Oxford, NY, 1991.
93. A.G. Evans and R.M. McMeeking: Acta Metall., 1986, vol. 34 (12), pp. 2435–41.10.1016/0001-6160(86)90146-X ↗