journal article·2011-11

Grain Selection in Spiral Selectors During Investment Casting of Single-Crystal Turbine Blades: Part I. Experimental Investigation

H. J. Dai, N. D’Souza, H. B. Dong

Publisher page

Abstract

Spiral grain selectors are used to grow single-crystal (SX) turbine blades during investment casting. Competitive growth in the spiral selectors leads to the selection of a single grain that subsequently grows to form the blade. In this study, the effect of spiral design on grain selection during investment casting was investigated through a series of experiments. It is found that the spiral design can effectively reduce the grain number but is not able to optimize axial grain orientations during solidification, the effectiveness of grain selection is strongly dependent on the spiral “take-off” angle, and spirals with smaller take-off angles are most potent. It is proposed that grain selection in the spiral is controlled by the geometry of the spiral via a “geometrical blocking” mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M. McLean: Directionally Solidified Materials for High Temperature Service, The Metals Society, London, 1983, pp. 107–149.
2. P.A. Jennings: Rolls-Royce plc., Derby, United Kingdom, 1996.
3. T. Murakumo, T. Kobayashi, Y. Koizumi, and H. Harada: Acta Mater., 2004, vol. 52, pp. 3737–44.10.1016/j.actamat.2004.04.028 ↗
4. B.C. Wilson and G.E. Fuchs: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1235–45.10.1007/s11661-009-9979-x ↗
5. A. Suzuki, M.F.X. Gigliotti, B.T. Hazel, D.G. Konitzer, and T.M. Pollock: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 947–56.10.1007/s11661-009-0169-7 ↗
6. H.J. Dai, H.B. Dong, H.V. Atkinson, and P.D. Lee: Solid State Phenomena, 2008, vol. 139, pp. 129–34.10.4028/www.scientific.net/SSP.139.129 ↗
7. N. D’Souza, P.A. Jennings, X.L. Yang, H.B. Dong, P.D. Lee, and M. McLean: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 657–66.10.1007/s11663-005-0056-6 ↗
8. R.C. Reed, T. Tao, and N. Warnken: Acta Mater., 2009, vol. 57, pp. 5898–5913.10.1016/j.actamat.2009.08.018 ↗
9. P. Caron and T. Khan: Aero. Sci. Technol., 1999, vol. 3, pp. 513–23.10.1016/S1270-9638(99)00108-X ↗
10. S. Tin, T.M. Pollock, and W.T. King: Superalloys 2000, K.A. Green, T.M. Pollock, and R.D. Kissinger, eds., Champion, PA, 2000, pp. 201–10.10.7449/2000/Superalloys_2000_201_210 ↗
11. A. Heckl, R. Rettig, and R.F. Singer: Metal. Mater. Trans. A, 2010, vol. 41A, pp. 202–11.10.1007/s11661-009-0076-y ↗
12. N. D’Souza, M. Lekstrom, H.J. Dai, B.A. Shollock, and H.B. Dong: Mater. Sci. Technol., 2007, vol. 23, pp. 729–33.
13. R.C. Reed, D.C. Cox, and C.M.F. Rae: Mater. Sci. Technol., 2007, vol. 23, pp. 893–902.10.1179/174328407X192723 ↗
14. T. M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22, pp. 361–37.10.2514/1.18239 ↗
15. M.J. Goulette, P.D. Spilling, and R.P. Arthey: Superalloys 1984, C.S. Kortovich and R.H. Bricknell, eds., TMS, Warrendale, PA, 1984, p. 167.10.7449/1984/Superalloys_1984_167_176 ↗
16. R.E. Napolitano and R.J. Schaefer: J. Mater. Sci., 2000, vol. 35, pp. 1641–59.10.1023/A:1004747612160 ↗
17. X.L. Yang, H.B. Dong, W. Wang, and P.D. Lee: Mater. Sci. Eng. A, 2004, vol. 386, pp. 129–39.10.1016/S0921-5093(04)00914-1 ↗
18. Y.Z. Zhou, A. Volek, and N.R. Green: Acta Mater., 2008, vol. 56, pp. 2631–37.10.1016/j.actamat.2008.02.022 ↗
19. A. Wagner, B.A. Shollock, and M. McLean: Mater. Sci. Eng. A, 2004, vol. 374, pp. 270–79.10.1016/j.msea.2004.03.017 ↗
20. M. Rappaz, C. Gandin, J. Desbiolles, and P. Thévoz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 695–705.10.1007/BF02648956 ↗
21. P. Carter, D.C. Cox, C.A. Gandin, and R.C. Reed: Mater. Sci. Eng. A, 2000, vol. 280, pp. 233–46.10.1016/S0921-5093(99)00701-7 ↗
22. H. Esaka, K. Shinozuka, and M. Tamura: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 151–55.10.1016/j.msea.2005.08.154 ↗
23. H.J. Dai, J.-C. Gebelin, N. D’Souza, P.D. Brown, and H.B. Dong: Int. J. Cast Met. Res., 2009, vol. 22, pp. 54–57.10.1179/136404609X367317 ↗
24. D. Pan, Q. Xu, B. Liu, J. Li, H. Yuan, and H. Jin: JOM, 2010, vol. 62, pp. 30–34.10.1007/s11837-010-0074-y ↗
25. H.J. Dai, J.C. Gebelin, M. Newell, R.C. Reed, N. D’Souza, P.D. Brown, and H.B. Dong: Superalloys 2008, R.C. Reed and K.A. Green, Champion PA, 2008, pp. 367–7410.7449/2008/Superalloys_2008_367_374 ↗
26. H.B. Dong and P.D. Lee: Acta Mater., 2005, vol. 53, pp. 659–68.10.1016/j.actamat.2004.10.019 ↗
27. C.A. Gandin, M. Rappaz, and R. Tintillier: Metall. Trans. A, 1994, vol. 25A, pp. 629–35.10.1007/BF02651604 ↗