Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel
Source abstract
Abstract
Dynamic strain aging (DSA) and rapid work hardening are typical behaviors observed in medium-Mn transformation-induced plasticity (TRIP) steel. Three alloys with manganese ranging from 10.2 to 13.8 wt pct with calculated room temperature stacking fault energies varying from − 2.1 to 0.7 mJ/m2 were investigated. Significant serrations were observed in the stress-strain behavior for two of the steels and the addition of 4.6 wt pct chromium was effective in significantly reducing the occurrence of DSA. Addition of chromium to the alloy reduced DSA by precipitation of M23(C,N)6 during batch annealing at 873 K (600 °C) for 20 hours. Three distinct DSA mechanisms were identified: one related to manganese ordering in stacking faults associated with e-martensite and austenite interface, with activation energies for the onset and termination of DSA being 145 and 277 kJ/mol. A second mechanism was associated with carbon diffusion in γ-austenite where Mn-C bonding added to the total binding energy, and activation energies of 88 and 155 kJ/mol were measured for the onset and termination of DSA. A third mechanism was attributed to dislocation pinning and unpinning by nitrogen in α-ferrite with activation energies of 64 and 123 kJ/mol being identified. Tensile behaviors of the three medium manganese steels were studied in both the hot band and batch annealed after cold working conditions. Ultimate tensile strengths ranged from 1310 to 1404 MPa with total elongation of 24.1 to 34.1 pct. X-ray diffraction (XRD) was used to determine the transformation response of the steels using interrupted tensile tests at room temperature. All three of the processed steels showed evidence of two-stage TRIP where γ-austenite first transformed to e-martensite, and subsequently transformed to α-martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. T. Tschiyama, T. Inoe, J. Tobata, D. Akami, and S. Takaki, Scripta Mat. 2016, vol. 122, pp. 36-39.10.1016/j.scriptamat.2016.05.019 ↗
2. D.-W. Suh, S.-J. Park, T.-H. Lee, C.-S. Oh, and S.-J. Kim, Met. Trans. A, 2010, vol. 41, pp. 397-408.10.1007/s11661-009-0124-7 ↗
3. D.-W. Suh, J.-H. Ryu, M.-S. Joo, H.-S. Yang, H.K.D.H. Bhadeshia, Meter. Trans. A, 2013, vol. 44A, pp. 286-293.10.1007/s11661-012-1402-3 ↗
4. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao, Scripta Mat, 2010, vol. 63, pp. 815-818.10.1016/j.scriptamat.2010.06.023 ↗
5. H. Luo, H. Dong, and M. Huang, Mater. & Design, 2015, vol. 83, pp.42-48.10.1016/j.matdes.2015.05.085 ↗
6. S. Lee, S-J. Lee, S. Santhosh Kumar, K. Lee, and B.C. De Cooman, Met Trans A, 2011, vol. 42A, pp. 3638-3651.10.1007/s11661-011-0636-9 ↗
7. Y. Zhang, L. Wang, K. O. Findley, and J. Speer, Met Trans. A, 2017, vol. 48A, pp. 2140-2149.10.1007/s11661-017-3995-z ↗
8. J. Han, S-H. Kang, S-J. Lee, and Y-K Lee, Jour. Alloy & Compound. 2016, vol. 681, pp. 580-588.10.1016/j.jallcom.2016.04.014 ↗
9. J. Han, S-J. Lee, J-G. Jung, and Y-K. Lee, Acta Mater., 2014, vol. 78, pp. 369-377.10.1016/j.actamat.2014.07.005 ↗
10. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock, Met Trans A, 2011, vol. 42A, pp. 3691-3701.10.1007/s11661-011-0687-y ↗
11. A. Arlazarov, M. Goune, O. Bouaziz, A. Hazotte, G. Petigand, and P. Barges, Mater Sci and Eng. A. 2012, vol. 545, pp. 31-39.10.1016/j.msea.2012.02.024 ↗
12. D. M. Field, D.C. Van Aken, Met Trans A., 2016 vol. 47A pp.1912-1917.10.1007/s11661-016-3394-x ↗
13. M.C. McGrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva, Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4634-4643.10.1007/s11661-013-1820-x ↗
14. C.D. Horvath, C.M. Enloe, J.P. Singh, and J.J.Coryell: Intl. Symp. On New Developments in AHSS, “Persistent Challenges to Advanced High-Strength Steel Implementation” Keystone, CO. 2017.
15. J.F. Enrietto, J. Iron Steel Inst. 1966, vol. 12, pp. 252-258.
16. W. Wepner, Arch. Eisenh., 1955, vol. 22, pp. 71-81.10.1002/srin.195502939 ↗
17. J.D. Baird and A. Jamieson, J. Iron and Steel Inst., 1966, vol. 204, pp.793-801.
18. K. Steineder, D. Krizan, R. Schneider, C. Béal, and C. Sommitsch, Acta Mater. 2017, vol. 139, pp. 39-50.10.1016/j.actamat.2017.07.056 ↗
19. P. Rodriguez, Bull. Mater. Sci. 1984, vol. 6, pp. 653-663.10.1007/BF02743993 ↗
20. Y.N. Dastur and W.C. Leslie, Metar. Trans. A 1981, vol. 12, pp. 749-759.10.1007/BF02648339 ↗
21. S-J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman, Acta Mater., 2011, vol. 59, pp.6809-6819.10.1016/j.actamat.2011.07.040 ↗
22. R.W. Balluffi, Phys Status Solidi, 1970, vol.41 pp.11-21.10.1002/pssb.19700420102 ↗
23. M. Kuzmina, M, Herbig, D. Ponge, S. Sandlöbes, and D. Raabe, Science, 2015, vol. 349, pp. 1080-1083.10.1126/science.aab2633 ↗
24. N.I. Medvedeva, D. C. Van Aken, and J.E. Medvedeva “Magnetism in bcc and fcc Fe with carbon and manganese,” J. Phys. Cond. Matter vol. 22, 2010, 316002.10.1088/0953-8984/22/31/316002 ↗
25. Medvedeva, N.I, M.S. Park, D.C. Van Aken, and J.E. Medvedeva, J. Alloy. Compd., 2014, Vol. 582, pp. 475-482.10.1016/j.jallcom.2013.08.089 ↗
26. J.B. Seol, J.E. Jung, Y.W. Jang, and C.G. Park, Acta Mater., 2013 vol. 61. pp.558-578.10.1016/j.actamat.2012.09.078 ↗
27. X.G. Wang, L. Wang, and M.X. Huang, Acta Mater. 2017, vol. 124, pp. 17-29.10.1016/j.actamat.2016.10.069 ↗
28. B. Sun, N. Vanderesse, F. Fazeli, C. Scott, J. Chen, P. Bocher, M. Jahazi, and S. Yue, Scripta Mater., 2017 vol. 133, pp. 9-13.10.1016/j.scriptamat.2017.01.022 ↗
29. M. Callahan, O. Hubert, F. Hild, A. Perlade, and J-H Schmitt, Mater. Sci. & Eng. A 2017, vol. 704, pp. 391-400.10.1016/j.msea.2017.08.042 ↗
30. D. Lee, J-K Kim, S. Lee, K. Lee, B.C. De Cooman, Mater. Sci. & Eng. A 2017, vol. 706, pp. 1-14.10.1016/j.msea.2017.08.110 ↗
31. B.K. Choudhary, K.B.S. Rao, S.L. Mannan, and B.P. Kashyap, Mater. Sci. & Tech, 1999, vol. 15, pp.791-797.10.1179/026708399101506580 ↗
32. B.K. Choudhary, Mater. Sci. & Tech, 2013, vol. 29, pp.278-284.10.1179/1743284712Y.0000000121 ↗
33. B.K. Choudhary, Mater. Sci. & Tech, 2013, vol. 29, pp.303-309.10.1179/1743284712Y.0000000121 ↗
34. B.K. Choudhary, E.I. Samuel, G. Sainath, J. Christopher, and M.D. Mathew, Met Trans A, 2013, vol.44A, 4979-4992.10.1007/s11661-013-1869-6 ↗
35. S. Venkadesan, C. Phaniraj, P.V. Sivaprasad, and P. Rodriguez, Acta Metall. Mater. 1992, vol. 40, pp. 569-580.10.1016/0956-7151(92)90406-5 ↗
36. L.J. Cuddy, and W.C. Leslie, Acta Met. 1972, vol. 20, pp. 1157-1167.10.1016/0001-6160(72)90164-2 ↗
37. K.T. Park, K.G. Jin, S.H. Han, S. W. Hwang, K. Choi, and C.S. Lee, Mater. Sci. and Eng. A, 2010, vol. 527, pp.3651-3661.10.1016/j.msea.2010.02.058 ↗
38. J. Kim, S.J. Lee, and B.C. De Cooman, Scripta Materialia, vol. 65, 2011, pp. 363-366.10.1016/j.scriptamat.2011.05.014 ↗
39. P.G. McCormick, Acta Metall. 1972, vol. 20, pp.351-354.10.1016/0001-6160(72)90028-4 ↗
40. A.W. Sleeswyk, Acta Metall. 1958, vol. 6, pp. 598-603.10.1016/0001-6160(58)90101-9 ↗
41. K.R. Limmer J.E. Medvedeva, D.C. Van Aken, N.I. Medvedeva Computational Materials Science, vol. 99, 2015, pp.253-255.10.1016/j.commatsci.2014.12.015 ↗
42. D.M. Field, D.S. Baker, and D.C. Van Aken, Metar. Trans. A, 2017. https://doi.org/10.1000/s11661-017-4020-2.10.1000/s11661-017-4020-2 ↗
43. S.T. Pisarik and D.C. Van Aken, Met Trans A., Vol. 47A 2016 pp1009-1018.10.1007/s11661-015-3265-x ↗
44. G.B. Olson, M. Cohen Met Trans A Vol 7 1976 pp. 1897-1904.
45. ASTM E 8/E 8M-08, Standard Test Methods for Tension Testing of Metallic Materials.
46. S. Martin, C. Ullrich, D. Simek, U. Martin, and D. Rafaja, J. Appl. Crystallogr., 2011, vol. 44, pp. 779-787.10.1107/S0021889811019558 ↗
47. S. T. Pisarik, and D. C. Van Aken, Met Trans A., 2014, vol. 45, pp. 3173-3178.10.1007/s11661-014-2303-4 ↗
48. C.C. Kinney, I. Yi, K.R. Pytlewski, A.G. Khachaturyan, N.J. Kim, J.W. Morris Jr., Acta Mater., 2017, vol. 125, pp.442-454.10.1016/j.actamat.2016.12.001 ↗
49. C. Wert and C. Zener, Phys. Rev., vol. 76, 1949, pp. 1169-1175.10.1103/PhysRev.76.1169 ↗
50. C. Wells and R.F. Mehl, Metar. Technol. 1941, vol. 145, p. 1282.
51. K. Oi, C. Lux, and G.R. Purdy, Acta Mater. 2000, vol. 48, pp. 2147-2155.10.1016/S1359-6454(00)00041-0 ↗
52. S. Shin, M. Kwon, W. Cho, I. S. Suh, and B.C. De Cooman, Mater. Sci. & Eng. 2017, vol. 683, pp. 187-194.10.1016/j.msea.2016.10.079 ↗
53. S.K. Huang, Y.H. Wen, N. Li, J. Teng, S. Ding, Y.G. Xu, Materials Characterization, 2008, vol. 59, pp. 681-687.10.1016/j.matchar.2007.05.023 ↗